Trying to connect using a wireless ethernet adapter

trying to setup a wireless connection on my deskjet 3510 allin one tried every solution on spin doctor put nothing worked.
I don't have a router I connect to the internet through a turbo stick.    My computer uses a an 802.11n network adapter
This question was solved.
View Solution.

Turning on Wireless Direct:
on the 3510
- press the wireless button (the one with the blue light in it)
- select Settings
- select Wireless Direct
- press OK
- select on (you can choose to use security or not
- press OK
Wireless direct should be on.  If you choose security you will want to display the password as you will need it when you connect the computer to the printer.
on your computer
- make sure the wireless adapter is turned on
- search for wireless networks (not sure of your computers operating system so I can't give specifics)
- look for a network with a name like "HP-Print-xx-Deskjet 3520 Series"
- connect to that network (use the password from the printer
- configure your printer driver (it should now see the printer - the printers IP address should be 192.168.223.1)
Assuming that you connected and the printer driver got updated you should now be able to print.
Connecting the computer and printer in this way dows not allow internet access from the the computer to the printer so unfortunately ePrint will not work.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Similar Messages

  • Error message "not connected via PPPoE" when trying to connect using airport wireless

    I cannot connect to my wireless internet connection using my ibook laptop. Using airport, I keep getting the message "host cannot find the PPPoE" or something like that. Any ideas how to fix this?

    Hi, Bob. Welcome to Apple Support Communities.
    Which exact iBook model is it? ("iBook" covers a lot of different Mac models, each with different capabilities.)
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Which version of the operating system is it running now?
    What kind of optical drive does it have? (CD-ROM, CD-RW, DVD, Combo, or SuperDrive?)

  • I have an 2009 imac running os 10.6.8 and a newer macbook air which I'm trying to connect using a wireless network without success, help?

    I have already set up and selected sharing in the system preferences but keep getting the error that the server may not exist?
    I'm not sure if I've done this right?  I'm completely not computer savvy and would appreciate any and all step by step guidance.

    On both computers I selected the file sharing, printer sharing and screen.  Then when I go to either finder - go - connect to server i get the following message:
    The server may not exist or it is unavailable at this time. Check server name or IP address, ......

  • Using AE as wireless ethernet adapter

    I've read through the airport express manual but can't seem to find if I can configure it to serve as a wireless ethernet adapter. I have an existing 802.11g wireless network (from a Westell router) and want to connect a computer that only has wired ethernet. I'd like to plug this computer into the wired connection on the AE and use the AE as a bridge to the existing wireless network. I know there's other hardware designed to do this, but I'd also like the AE's audio out at this location.
    Thanks for the help.

    It is not possible to do this with your current router. I don't believe your current router can do WDS network with Express, which is the only way you can activate ethernet port.

  • I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    Then use multipel 99 picture slideshows. 
    You can have up to 8 or 9 slideshows per menu.  If you add a sub menu reduce that by 1 and add 8 more to the sub menu.  The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows. 
    However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD.  It just becomes a single video/movie file.  So you should not have a problem with exporting at the large size, 720 x 540,
    and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
    OT

  • My laptop continually tries to connect to HP3050 wireless even if I am not near the printer.

    HP3050 wireless printer Samsung Laptop with Win 7 SP1
    My laptop every minute or two runs a program in the background. I see an egg next to the mouse pointer. I used Process Explorer to establish that it is trying to connect to HP3050 wirelessly. This happens even if I am nowhere near the printer. It is very annoying and uses up computer resources. I have removed the printer for now and the problem is cured. How can I fix this and use the printer again?
    [email protected]

    Topgunb,
    Try re-installing the latest version of the full feature software located here:
    http://goo.gl/PTwdX
    Let me know if the issue persists. Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File

    Post Author: bhaveshbusa
    CA Forum: Crystal Reports
    In the ReportDocument.Load method it tries to connect using the using the connection information embedded in the Report File. When the application calls ReportDocument.Load(reportFileName). This
    tries to connect to the database using the connection information embedded in
    the "reportFileName". This was only realised on checking the ODBC Trace
    Log. The connection itself is not a problem. The problem is that the embedded
    connection information is related to OLD production system. And failed
    connections had raised some concerns.
    Note: I am using
    SetDataSource to populate the data for the report. So I don't need the
    connection.
    Is there any way I
    can disable this auto-connect?
    Thanks and
    regards,
    Bhavesh

    960738 wrote:
    I need a help in answering one of the issue encountered last week.
    I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
    But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
    As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
    Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
    I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
    is it a NETWORK issue or issue with DATABASE SERVER only?
    Thanks
    SSP
    Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
    DBLINK only contains username, password & TNS Alias.
    can you post actual SQL & results?

  • Trying to connect IPAD to wireless router

    Help & advise needed. I have been trying to connect to my wireless router. I can see my network in the IPAD and when I try to join and enter my password it give me a message " incorrect password". I have reset my router 2x now and created new user & password ID.

    I am having the same problem. It is very frustrating. My lap top connects to my router just fine and my iPad can connect to other routers with no problem. PLEASE help us!

  • I have tried to connect my c310 wireless although i have connected with usb. help!

    i have tried to connect my c310 wireless although i have connected with usb.  help!
    Printer does not recognize the network name.  I have  run the setup many times with no success.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Trying to connect second laptop wirelessly but can only use numbers in password field

    I've connected my Mac and another PC to my Valet Plus with no trouble.  The third PC, running Windows XP, can only be connected as a guest.  When trying to connect to this laptop to the home network, the password will only accept numbers.
    I've tried changing the PC's security settings, disabling the firewall, etc.  Has anyone experienced this problem? 

    What is the service pack on your computer?
    If it is windows XP service pack 1 then I think you will need to upgrade the OS to SP3. Because SP1 will not support WPA/WPA2 security mode.
    When you install the router using Cisco connect, the wireless security on the router will be WPA/WPA2.

  • Trying to connect 2nd printer through Ethernet Port of AEX b/g

    Hello all, Hello (maybe) Duane,
    I do have a 2nd Airport Express b/g on our home network, and have a normal laser printer running as a wireless bonjour printer through that 2nd AEX, which is set up as a remote base station. I do have the Ethernet port free on that AEX, and want to connect a Brother 4040cn network ready color laser printer through the Ethernet port of this base station and use it as a bonjour printer? wirelessly... The AEX is set up as a remote base station to the main base station using WDS... I read a lot that the ethernet port only works when this station is in WDS mode - it is, but I still can't get it to work...
    I talked to a guy at the Apple Store and he told me it should work, and that I somehow have to configure the Ethernet port of the AEX as a bridge so that could work.... ? It is not a supported solution (as expected...) so I tried to find that, but I am not able to work it out.
    I can see the printer using the brother software, it shows me the status of the printer correctly, but I cannot get any printouts. The printing windows shows the printer, even lets me pick it as a bonjour printer, sends it off to the printer, but nothing arrives at the printer... I can use the web based printer management utility, which directly connects to the using the IP address, and can send stuff that is printed out, but i cannot get it working.
    Hope that makes sense - anyone out there able to help?
    Ningaloo

    Hello,
    If you wanted to setup a wireless network, you could look at some Wireless Ethernet USB adapters (will work just like the AirPort):
    http://www.afterthemac.com/
    Understand that the "AirPort" is just Apple's fancy name for Standard WiFi Networking. It's not anything special. Just Apple's implementation.
    So, any WiFi Ethernet Adapter is going to be compatible with Apple's Airport network.
    If you want to use the standard USB to Ethernet adapters, then you could look to see if you can find a suitable driver that will either enable your adapter (the one you just purchased) to work, or perhaps find an adapter that has a 3rd-party driver and then purchase that one. The following website lists Mac OS drivers that will enable "Windows-Only" adapters to work:
    http://www.sustworks.com/site/newsusbethernet.html
    The problem there, is that most USB to Ethernet (not wireless) adapters come only with Windows drivers. So, this website provides information and support to make those devices with with Mac OS X.
    Otherwise, I have not found a pre-packaged USB to Wired Ethernet device that comes with Mac drivers.
    But, the first website lists lots of USB to Wireless Ethernet adapters that come with Mac Drivers.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • Can't get my mail when use the USB Ethernet adapter

    I can't get my mail when use the Apple USB Ethernet Adapter. If I use a wireless connection, there is no problem. The LAN which I'm trying to connect is behind a proxy server but the Internet is working 100%.

    Hi ViK,
    This sounds like a question for the network administrator of the location. Without knowing how the proxy is set it's impossible to know what it's blocking (incoming/outgoing). It sounds like it might be filtering the incoming mail server.

  • I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

    This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

    user8744713 wrote:
    I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
    Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
    When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
    Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
    Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
    Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
    >
    Thanks in advance!
    Edited by: user8744713 on Mar 26, 2010 10:17 AM

  • I got internal error 2738 after trying to install the marvell yucon ethernet adapter driver

    I got the marvell yucon ethernet adapter driver on the acer support page. My laptop is an extensa 5420-5038 with vista sp2 32 bit. My wired lan is not working but the wireless is. The version of the acer driver is 10.12.8.3 if that would help. I think uninstalling the old software for the adapter must have failed during installation and I don't know what to do. I don't know how to find any old applications or machine language software for the adapter in the computer to uninstall before trying again if that is what I have to do. Do I have to go to the command prompt and do something? 

    http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/internal-error-2738-when-trying-to-update-marvell/ce07aa54-f6d2-4834-89c5-71b61877eb4e

  • Trying to connect using Network Browser, AppleTalk

    I am trying to connect to another computer in my office. I go to the Apple Menu, Network Browser, AppleTalk, click AppleTalk and usually the name of the other computer that I want access to appears in the list, the last two days the other computer name does not appears in the AppleTalk list? Do you have any helpful ideas to how I can access my other computer?
    Message was edited by: Wet irish
    Sorry for the two posts!

    If the other computer and your computer do not BOTH have AppleTalk ON, and assigned to the same medium (typically Ethernet) you will not be able to connect.
    If either computer is losing its PRAM backup battery, a power fluctuation can corrupt the parameters, including AppleTalk settings.
    If either computer is upgraded to 10.4 or later, AppleTalk File Sharing was removed at that point, so you will have to connect using IP. You can click on the big button in the Chooser, "Server IP Address", and enter the other computer's IP address. \[The other computer is acting as a Server in this case.]

Maybe you are looking for