Trying to connection Mac Mini to HD Projector 100 ft away....

Is HDMI an option or will I need to go another route? Setting up a new HD Projector in a church sanctuary and want to get the best picture available out of it.

100 feet is near enough 30.5 metres. This is longer than HDMI or DVI would normally go, and also VGA. What you are going to have to do is use a product that converts the video signal to send it over different cabling and allows you to go a longer distance. I am listing an example product below, you would need a converter at each end, the following is for a pair.
http://www.amazon.co.uk/Cablesson%C2%AE-Extender-Ethernet-Single-network/dp/B003 XFSNSA/ref=pd_cp_ce_4

Similar Messages

Can I connect Mac mini to Windows laptop?

I would like to connect Mac Mini to HP windows 7 Laptop as to use
the laptop as keyboard and monitor instead of connecting to TV and using
separate keyboard.
Is this straight forward to do? does it need some workaround? or is it impossible?

Hi, you'd have to setup Screen Sharing on the Mini first it's like Remote Desktop on PCs.

Connect mac mini to internet via windows phone

hallo, how can i connect Mac mini to internet via my Windows Phone?

You are going to have to buy an external modem. They make ones that plug into the USB. Apple does not make one so you will have to buy a 3rd party modem. I would read the reviews before making the purchase to make sure you buy one that someone has tested with a mac.

Connecting mac mini to USB monitor didn't work!!

I connected new Mac mini(2007 model) with the latest HP USB monitor. Nothing got displayed on the monitor. Then I need to connect mac-mini to another VGA connector monitor. But still want to know to connect USB monitor with mac-mini as this is my target setup.

Thank you.
I used Tiger OS specific drivers from the following link.
www.displaylink.com/support/mac_downloads.php
Now it's working but not 100%. Upon starting of the mac-mini monitor works fine. But later when I switch off and switch on the monitor, then it doesn't work. Looks like monitor off -on trigger is not handled in the driver.
I will check with the driver like you have suggest and then acknowledge.

Connect mac book to vga projector

Hi,
Eveyone...can anyone helpo me with 30 mins?
Have a mac book pro and am trying to connect it a Project via the apple VGA connector.
When I plug everthing in the projector does not pick up the MPB???
on a pc/laptop I would nornally use fn / F5 to shift through the different screen options.
Any help would be greatly appreciated!!
Thanks

Look for a minidisplay port to VGA cable. The Thunderbolt port will act as a minidisplay port if required.
Ciao.

How to connect Mac Mini with LG 19LS4D LCD TV?

Hi all,
I just purchased my Mac Mini and tried connecting to my LG 19" HD TV using the supplied DVI to VGA adapter. When I first booted the machine "No signal" was displayed on my TV. I plugged in another 15" monitor and played around with resolutions and cable swapping and it works at 1024 x 768 at 60Hz (not ideal but better than nothing). Everytime I turn off the Mac Mini or it goes to sleep the resolution is reset and "No signal" appears again.
I have tried connecting via VNC to play around with the settings remotely but this has no effect on my TV monitor and is only resolved by the solution above or by leaving my Mac awake and not sleeping.
The documentation for the TV says that all the resolutions I have tried, and more are supported and Detect Displays under System Preferences shows these but defaults to a resolution that produces a "No signal" box.
Any ideas would be greatly welcomed.
Thanks in advance

Hi BSteely,
Thanks for the reply. To answer your questions, the LG shows on the mini as it should do i.e. there is a specific code (the LG model number) and lists the resolutions and refresh rates listed in the manual. Adobe Photoshop complains of a bad colour profile but I think that was only because when the LG is finally lit up it is as a result of me connecting the 15" monitor then hot swapping before OS X has change to realise.
When using VNC with the LG attached 1024 x 768 at 60Hz is shown but selecting that does not show the screen on the LG.
I did install SwitchResX from looking at other forums but was unable to save a usable state as the profile and resolutions were from a different monitor effectively despite my LG being connected. The P&D file that it gave back is listed in full below although I suspect this is for my 15"monitor (Excuse the length but I am unsure as to which bits are most useful).
The LG manual lists 1440 x 900 at 60Hz as the native default however the mini fails to recognise this. The easiest resolution I can get after hot swapping monitors is 1024 x 768 at 60Hz although the other day (not sure how) I did get 1280 x 1024 (at 60Hz?). The LG does not however have a DVI port. It does have HDMI so a DVI to HDMI cable could work but without buying a cable I don't know.
Here is the LG's information file:
DDC block report generated by SwitchResX version 3.8.4 for display
VGA/SVGA Display
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 09 AD 38 02 BD E7 00 00
1 | 30 0B 01 01 08 1E 18 64 E8 17 26 A0 61 58 9A 2E
2 | 27 54 39 AD CE 00 01 01 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 C3 1E 00 20 41 00 20 30 10 60
4 | 13 00 1E 16 00 00 00 1E 64 19 00 40 41 00 26 30
5 | 18 88 36 00 1E 16 00 00 00 18 00 00 00 FD 00 3C
6 | 4B 1F 3C 08 00 0A 20 20 20 20 20 20 00 00 00 FE
7 | 00 46 58 57 4A 31 42 30 32 35 39 33 32 35 00 66
< 00FFFFFF FFFFFF00 09AD3802 BDE70000 300B0101 081E1864 E81726A0 61589A2E 275439AD CE000101 01010101 01010101 01010101 0101C31E 00204100 20301060 13001E16 0000001E 64190040 41002630 18883600 1E160000 00180000 00FD003C 4B1F3C08 000A2020 20202020 000000FE 00465857 4A314230 32353933 32350066 >
Valid EDID block: checksum passed
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.1
Manufacturer........BMM
Product Code........14338 (3802) (0238)
Serial Number.......0000E7BD
Manufactured........Week 48 of year 2001
Max H Size..........30 cm
Max V Size..........24 cm
Gamma...............2.00
Display Supported Features:
Power Management: Active off Power Management: Suspend Power Management: Standby
Display type:
RGB color display
Display is non continuous frequency
Default color space is not sRGB standard
Input signal & sync:
Analog input with: 0.700V / 0.300V
Composite Sync
Color info:
Red x = 0.625 Green x = 0.345 Blue x = 0.180 White x = 0.329
Red y = 0.380 Green y = 0.604 Blue y = 0.154 White y = 0.225
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1024 x 768 @ 75.029Hz
Pixel Clock............. 78.75 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 16 pixels 1 lines
Sync Width.............. 96 pixels 3 lines
Back Porch.............. 176 pixels 28 lines
Blanking................ 288 pixels 32 lines
Total................... 1312 pixels 800 lines
Scan Rate............... 60.023 kHz 75.029 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #1 is Timing definition:
Mode = 1024 x 768 @ 60.004Hz
Pixel Clock............. 65.00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 24 pixels 3 lines
Sync Width.............. 136 pixels 6 lines
Back Porch.............. 160 pixels 29 lines
Blanking................ 320 pixels 38 lines
Total................... 1344 pixels 806 lines
Scan Rate............... 48.363 kHz 60.004 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......31-60 kHz
Vertical frequency range.........60-75 Hz
Maximum bandwidth unspecified
Descriptor #3 is ASCII data:
FXWJ1B0259325

No picture when connecting Mac Mini GMA 950 to Panasonic TX-PF42G10 via HDM

Hi !
I have a Mac Mini Core Duo 1,66 GHz with GMA950 chipset (MacMini1,1 sold from february 2006 to september 2006) which I was using as a Plex mediacenter connected to an old CRT display via an s-video adapter.
I purchased a brand new Panasonic TX-PF42G10 plasma screen the other day, and for the life of me I can't get my Mini to feed anything to the HDMI inputs via a DVI/HDMI cable.
When I remotely connect to my Mini with ARD or VNC, I can see it successfully detects I have a "Panasonic-TV" and lets me choose 1920x1080 either in 24Hz, 50Hz or 60Hz. I tried all three : no picture.
Tried connecting this Mini via the VGA input: works fine.
I tried to install SwitchResX but I don't really know what to do with it. Tried to install Snow Leopard too, but it didn't help either.
YET I FOUND SOMETHING RATHER INTERESTING.
I have another more recent Mini (one of the new 2009 models), hooked up to a Samsung T240HD display via DVI. Since this display also has an HDMI input, I tried to connect the other, older Mini to it. And then... the Samsung display wouldn't let me pick the HDMI input from the source menu!
I thought "***???", and then I tried to connect the newer Mini to this HDMI input: works great! I then kept the HDMI end connected to the display, unplugged the DVI end from the newer Mini and plugged it back to the older Mini : BINGO, picture at last...... except the display kept showing a "No signal, check cable" message (even though it was displaying my Mini desktop!).
So I thought "OK, some handshaking problem I guess". I unplugged the HDMI connector from the Samsung display and replugged it immediately: like I thought, once more the display wouldn't let me pick the HDMI input!
So I guess this is the same problem I'm having with the Panasonic plasma: this older Mini is unable to tell the TV that it is connected to it, even though it can perfectly read the TV specs. I've had no time to check what happens if I connect the newer Mini to the Panasonic plasma, but I'd bet it will work just fine.
So basically, my question is: will I ever be able to use this old Mini of mine with this shiny new plasma screen, or will I have to purchase another 2009 Mini? Is there anything I can do with SwitchResX? If so, what should I try?
Thanks for taking the time to read, and thanks in advance to anyone who can help.

Sounds quite possibly like the Panasonic enforces HDCP over its HDMI inputs and the older GMA950 equipped mini is unable to oblige.
That's what I thought too, as the newer Mini works just fine with my two screens, using the very same cable I used with the older Mini. Bugger...
FYI, I tried 720p : no picture either.
Does the Panasonic's user guide make reference to making computer connections over HDMI? It could be that only one of the HDMI inputs on the TV is designated for computer input, e.g. only one of the TV's HDMI inputs can work from a non-HDCP compliant source.
I do think I tried all 3 inputs, and the user manual never suggests that one of them is designated for computer input (I know some Samsung screens work that way, but this Panasonic doesn't seem to). Anyway, I'll give it a try once more, but I have little hope...
Meanwhile, I connected my Mini via VGA, 1366x768 resolution. Not too bad when viewed from the sofa, but it kills me not to be able to use the digital input...
Thanks for your replies, though

Connecting Mac Mini to Sharp LCD 45" TV

I just purchased a MINI for Xmas 09'. I have tried to connect it to my 45" tv via: DVI and S-Video connections, both have been un-successful! The only time the Mini shows a display is if I connect to a 17" computer monitor.....
I purchased the Mivi- Dvi to Video Adapter/ Mini DisplayPort to DVI adapter/
Mini-DVI to S-Video Adapter and not 1 works with TV. The only time it shows display is when I connect using the Mini-DVI to VGA adapter and connect to my 17" computer monitor.........
IS there something I'm connecting wrong? Does the MINI even connect to a 45" TV?
HELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPP! Its driving me NUTZ!
My TV is a SHARP LC-45GD7U. It has "S" Video inputs, DVI-I (29Pin) Inputs.
It also has HDMI but it is being used via CABLE TV!
Any info would HELP! THANKS!

Hi- sorry to hear you are having problems.
Did you try using the mini-dvi to dvi adaptor that was included for free in your mac mini box? Give that a try, but that being said, the mini display port to DVI adaptor should have worked.
Just a note- the S-video adaptor will NOT work with the new 2009 minis. At all. You should bring that back to the store and return it.
Also, can you give us the following details:
1. Model of your Panasonic set.
2. Exactly what do you see on your screen when you try to connect? Black screen? Blue screen? Garbled screen? Screen with huge or blurry text? Please be as specific as possible.

Lacie Electron 22 blue III connection mac mini

Hi,
I'm trying to connect a Lacie Electron 22 Blue III CRT monitor to a new Mac Mini... I have the adaptor (HDMI to VGA), so monitor appear completely black... no signal.
I connected the Mac Mini to an HDMI TV, and I selected a 1024x768 resolution... so it doesn't work!
Who can help me, please?
Thanks,
ale

Yes,
A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
If you plan to do other things with your Thunderbolt connector and don't want it wasted on a monitor, you can also choose an HDMI --> DVI adapter, which for your purposes will be functionally equivalent.
You can even use both at the same time.
- Anonymous
http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115

Connecting Mac Mini to AV Receiver

I thought this would be simple. I purchased a Mac Mini today with the thought of connecting it through my AV receiver to my LG tv. Here's what I did:
1) brought it home from the store
2) plugged an HDMI cable into the Mac Mini, and the other end into my receiver (Yamaha RX-V3800)
3) there is another HDMI cable that goes from my receiver to my LG tv (LG Infinia 50PK950)
4) turned everything on, turned the receiver to the correct input that I plugged the Mac Mini HDMI cable into...
... and I get nothing.
The Mac Mini is on, the blue light is on.
Do I need to perform some sort of set up on the mini before I can connect it to my tv to use the tv as a monitor?
Did I connect the wrong HDMI cable?
Is it not compatible?
I thought it would be an easy connection if I went Mac Mini > HDMI > Yamaha AV Receiver > HDMI > LG Infinia 50PK950 TV.
Any help?

Yup - tried connecting it through 2 different HDMI inputs on the tv, and tried different HDMI cables in case that was the problem. All I'm getting is "No Signal" on the tv.
I can run a PS3 through my receiver via HDMI and to the tv and it works fine.
I think the first step at this point is to verify that the actual mini is working since I just pulled it out of the box and connected it. The blue light is on and it sounds like it is on but I haven't been able to see it on any monitor or tv.
Should I be able to just connect straight from the mini to a tv using an HDMI cable? I don't have a mouse or keyboard plugged in either, I only have the wireless apple ones.

Connecting Mac mini to internet through Xfinity router

This one took me a couple weeks to figure out, and I've seen a couple of similar posts in the forums, so I decided to post my findings here in the hope that it will help someone else.
Short version of the problem: I have a Mac mini (mid-2010 server version) that would connect to the Technicolor TC8305C WiFi router that was supplied to me by Comcast, but it would not connect "through" to the internet.
Details: The Mac mini connected automatically to the Wi-Fi (via DHCP) of the router, but nothing would connect "through" to the internet -- not Chrome, not Safari, not Mail, not the App Store, nothing. This was baffling because every other device in the house (3 laptops, 2 iPhones, and an Apple TV) all connected just fine. I checked all of the settings in the Network pane of System Preferences, comparing the Mac mini's against each of the laptops; all of the settings were the same (default, "out-of-the-box" settings). I thought maybe the problem was something at the OS level because the Mac mini was running Snow Leopard server and the laptops were not (two were running Mavericks, and one was running Leopard).
Here's where it gets weird... I connected the Mac mini to the router using an ethernet cable and everything worked normally for the wired network device. I was able to use the App Store to update the OS on the Mac mini to Mavericks. However, after I disconnected the ethernet cable, the problem came back and the Wi-Fi would connect to the router but not to the internet.
I double-checked that any "server" software on the Mac mini was turned off -- e.g., that it was not trying to serve as its own DHCP server. As I suspected, none of these services were on, so that wasn't it either.
In that same vein, I tried setting a static IP for the Mac mini in the router's control interface. Again: no luck.
Lastly, I got this weird idea that the only remaining difference that I hadn't tried was the pre-configured IP address prefix octets.
Solution: I reconfigured the router to use 192.168.x.x (like my previous router did) as the network prefix instead of the 10.0.x.x prefix that it uses by default. After I made that change in the router, everything fell into place and the problem went away. I never did figure out the reason this change was significant, but as I said -- it was the only thing that worked.

Interesting, thanks for the report/tip!

Connecting Mac mini to wireless

We bought an older mac mini that we're trying to connect to our wireless network. It doesn't have an airport card. We have an airport extreme that we've connected to our wireless network, and then plugged the ethernet cable into the mini. We still can't get it to connect to the internet.
Anyone know what we are doing wrong here? Thanks so much.

You can join a wireless network.. but this puts the Extreme in client mode.. not bridge.. so the extreme is a dumb client.. no wap, no switch, no nothing.. it is totally useless.
Is there anything else I can do?
-or-
do you have a good recomendation for a USB wireless stick?
Use ethernet or EOP (homeplug) adapters.
Use a Netgear bridge. Or some universal bridge that works with the netgear.
I do not have a recommendation on USB wireless.. to be truthful I avoid them like the plague.. USB is not a great interface .. at least up to latest usb3 and you won't have one of those..
What I would do is buy a second hand extreme or express which are pretty cheap now and make the bridge between apple routers.

Connection Mac mini with lcd 32' (daewoo sensi)

Hi
i m trying to connect a lcd daewoo 32 to a MacMini
this works with dvi/sub 15 but there is no access to zoom ,panorama or 14/9
only 4/3 and 16/9 are available
the lcd give access to these options when connected to a dvdplayer with yuv
i bought a dvi/yuv adaptator for the macmini but there is no image on the display
should i connect the mac mini with dvi/hdmi link to access
Has anyone successfully connected a lcd with these options ?
Thanks in advance

Thanks Anne for the answer
i allready downloaded this before posting , i'm not sure it helps
let me try to be more specific
the problem is to use front row on the mini with a 16/9 display (32') for films
with the dvi/yuv adaptator , it seems that the mac ( or the card) can not send this signal . Too bad , the tv with yuv connection accepts zoom , 14/9 ...
with the dvi/vga adaptator , the signal is ok on tv , at least for movies (1280x1024) , but the tv (plugged with vga ) does not give access to zoom , 14/9 so movies are "small"
not overscanned , but small
so i'm looking for somebody who plugged this successfully ( mini front row and movies in full screen ( or max available) without deformation of the image
Another option could be dvi to composite adaptator ...but going out from the mini in dvi to display on a 1366x768 LCD does not seem to be the best

Blue Tooth issues - connecting Mac Mini to Bose Speaker

I am trying to bluetooth my Mac Mini to a Bose Soundlink Mini speaker. I've successfully paired the devices, but I can't then some to get them to connect. Anybody experienced a similiar problem? Any suggestions for solutions gratefully received.
Thanks

The new mini has both a Mini DisplayPort interface and a Mini DVI interface. There is really no good reason to choose mDP over mDVI for your intended application that I am aware of. In fact, if you really plan on using a VGA interface into the TV, I would go with the mDVI output over mDP because mDVI puts out VGA signals automatically and directly as part of the DVI spec.
mDP does not make any provision for analog video. As such, the Apple adapter that goes from mDP to VGA has active electronics in it, is more costly and has greater potential for acting dodgey, IMO.
And one last point; the real purpose of hooking up the MBP would be to see how the TV responds running from a computer. If you encounter a lot of the types of problems often experienced by others on these forums, things like problems with overscan, anamorphic distortion (wrong aspect ratio), wrong resolution choices...things like that, then likely the mini will give the same trouble. If, on the other hand, you experience smooth sailing connecting the MBP to the TV by VGA and are happy with the outcome, then likely too the mini will work the same way. That's the real point behind trying it first with a computer you have, before investing in a computer you don't have.

Connecting Mac Mini through RCA inputs

Is it possible to connect a Mac Mini to a television with RCA inputs? If so, how would one go about doing that?

+The Apple DVI to Video Adapter was designed to allow Mac Pro (with ATI X1900 XT), MacBook Pro, Mac mini and Power Mac G5 users to connect the DVI port to an S-video or Composite video device such as TVs, VCRs or overhead projectors with S-Video or RCA (Composite) connectors. The Apple DVI to Video Adapter is designed to work with the DVI port on the Mac Pro (with ATI X1900 XT) MacBook Pro, Mac mini and Power Mac G5 systems only.+
+Use a separate DVI to VGA Adapter for VGA video out for Mac Pro, MacBook Pro, Mac mini or Power Mac G5 (included with all Mac Pro, MacBook Pro, Mac mini or Power Mac G5 systems or available for order as a standalone kit).+
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M92 67G/A

Trying to connection Mac Mini to HD Projector 100 ft away....

Similar Messages

Maybe you are looking for