Trying to convert from .mts to .flv

I'm trying out Flash Video Encoder for creating .flv files to
add to my web site. My Canon HD HG10 creates .mts video files,
which aren't being uploaded when I try to "Add" them. This format
is not in the drop-down list. Any suggestions?
Scott

Thanks, Tiago. Can you elaborate on how (e.g., what tools I
should use) to convert to MPEG? I have the .mts files downloaded to
my computer, and the ULEAD Movie Factory software can use them to
burn dvds. Adobe Flash Video Encoder doesn't seem to recognize the
.mts format, so how do I go about converting to .mpg so I can
ultimately create FLV?

Similar Messages

I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

I am looking for a high quality video converter from MTS or M2TS format to MAC...many softwares claim they can do it but turn out to be disappointing (low quality...).
Please advice if you know of any solution or serious test forums.
Thanks!

Also, you didn't say for what purpose you need them converted, but this thread might ofer a clue:
https://discussions.apple.com/message/21389296#21389296

PDF's from my Yahoo account converts from .PDF to .FLV

Using Safari 5.05 - downloading PDF attachment from my Yahoo account it converts the file from .PDF to .FLV, then I have to open manually. Works fine download through Firefox. Any ideas why this happens in Safari?

Hi!
I have the same issue. When I download from anywhere it adds flv extension to the pdf like xxx.pdf.flv.

Audio off when converting from mov to flv

I have an mov file that I am trying to convert with the media encoder, but when I run it through, it throws off the audio just slightly. I have tried converting to flv and mp4 with the same results. What is causing this? Can I fix it? I need to be able to convert the file so I can use it in a Captivate project.

I resolved the issue. I googled the issue and the answer was right there. Turns out that one audio clip (out of dozens in the project) was somehow corrupted. A small yellow triangle was the indication. Once I deleted that clip all of the other audio came back into the project. I simply pasted a fresh version of that audio clip into the project and the all was not lost.

I have just purchased the PDF to word converter and I am trying to convert from PDF to word and keep getting a conversion failure? If this can't be fixed how do I cancel my subscription?

I keep getting a conversion failure when I try to convert from a PDF into word. Does anyone have any suggestions?

To use the online service you must upload the file to the service's web site after sign in to your account.
The ExportPDF and the PDF Pack Services provide for PDF to Word / Excel.
Each has its own dedicated user-2-user forum where you'll want to browse and ask questions.
For ExportPDF:
https://forums.adobe.com/community/exportpdf
For PDF Pack:
https://forums.adobe.com/community/createpdf
Be well...

How do I convert from AVI or FLV to SWF file?

First, I'm a complete Flash novice...this is the first time
I've dealt with any FLV or SWF files. So, please forgive my
ignorance on these topics. I have several small AVI files and have
successfully converted them to FLV format via Premiere Pro CS3 and
Adobe Media Encoder. But the client is also asking for SWF files of
the same videos. I've looked and looked for a way to save SWF
files. I tried pulling the video into Flash CS3, and saving as SWF,
but since I know nothing about using Flash, I don't seem to be
doing it correctly...seems like I'm getting just a single blank
frame. I've looked at the dozens of third party programs that claim
to be able to convert FLV to SWF, but the one I downloaded "Free
Video to Flash Converter" generated an SWF file that doesn't seem
to be playable anywhere. If there is a click-by-click method for
using Flash to perform the conversion, I'd be ever so grateful.
Again, please forgive my Flash-ignorance. Thanks for your help.

Why doesn't Flash have a built-in capability to convert FLV
to SWF? It's an obvious need and there are 3rd party programs of
varying quality that do it. Why should people who have already
purchased Flash need to look for something that handles this OK and
then install it on their machines?

Converting from quicktime to flv

I need to convert a quicktime video to an flv format that is progressively downloadable on the webe. How can I do that? I am on a mac.

http://www.adobe.com/products/mediaencoder.html
That's what I use if I have to make an FLV. These days I try to keep things HTML5 friendly (MP4).
Unfortunately there AREN'T any trial versions of CS6 or CS5 available. It's part of some Creative Suites (I use Master Collection which has it). If you only need to convert one or two, you may want to download a CS6 trail here: http://prodesigntools.com/adobe-cs6-direct-download-links.html
You need to follow the instructions CAREFULLY. You MUST login with your Adobe ID and refresh the page, or the download link won't work. Design &Web Premium, Production Premium and Master Collection have Media Encoder in them AFAIK.

Hi! Trying to convert from Create PDF to Adobe Acrobat.

A couple of hours ago I purchased Adobe Reader's Create PDF instead of Acrobat, which was what I was really needed. After trying to see if Create PDF would work for my needs, I still need Acrobat. How can I fix this? Hving trouble getting ahold of anyone on phone support...

You need to Contact Customer Care by phone or chat.

How do I save data in a numbers spreadsheet? I am trying to convert from Excel and can't find the save button!

I am new to Imac and numbers and am currently working on my first spreadsheet but must be thick as I cannot find the save icon!

As you are no longer in M…oSoft world, you have to change your habits.
In AppleLand, there is no Save icon/button.
We have menu items or/and shortcuts.
If you imported an Excel document in Numbers under Lion, you may use :
File > Save…
or
File > Export…
or
Share > Export…
These three commands allow you to export as an Excel file.
If you want to save as a Numbers one, only
File > Save… will apply.
It would be useful to download and read
Numbers User Guide
and
iWork Formulas and Functions User Guide.
Yvan KOENIG (VALLAURIS, France) dimanche 18 décembre 2011 18:12:53
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

MAC OS 01.4.11 WITH SPRINT CENTRO PALM SYS. TRYING TO CONVERT CONTACTS TO PALM 800W? NOT POSSIBLE?

THERE ARE 4 PROBLEMS TRYING TO CONVERT FROM PALM CENTRO DATA TO PALM 800W:
1.MAC needs third party software to convert to ms,(if you have windows computer you still have the MS ongoing problems),
2.PALM PDA CELL PHONES,(no vision for the future)
3.NEW 800W WINDOWS MOBILE CELL PHONES.(usual monumental updates $$$)
4.SPRINT(lacks the technical support).
CAN'T TRANSFER 565 CONTACTS FROM CENTRO(palm system) TO PALM 800W(windows mobile system). WINDOWS SUCKS. WON'T ALLOW TRANSFER OF MORE THAN ONE CONTACT TRANSFER AT A TIME VIA BLUETOOTH(the only way to transfer data). THAN IF YOU DON'T HAVE A WINDOWS BASED COMPUTER, YOU WILL NOT BE ABLE TO SYNC DATA.
ON ONE AT SPRINT CAN HELP. YOU WOULD THINK IF SPRINT OFFERS THE PALM PHONES AS UPGRADES, THEY WOULD BE ABLE TO PROVIDE PALM CUSTOMERS INFORMATION ON HOW TO TRANSFER DATA TO WINDOWS MOBILE DEVICES. THIS IS A PRIME EXAMPLE OF MICROSOFT CONTROLLING THE WORLD OF TECHNOLOGY AND SPRINT AND PALM OBVIOUSLY THEIR SLAVES.
YOU'D THINK PALM WOULD BE PROUD ENOUGH WITH THEIR "AWARD WINNING OPERATING SYSTEM FOR PDA'S" AND NO DOUBT BEST, STABLE SOFTWARE FOR CELL PHONES, TO HAVE ENOUGH PRIDE TO MAKE A NEW PALM CELL PHONE THAT WOULD BE COMPATIBLE WITH THE SPRINT NAVIGATION SYSTEM... MAYBE THE CENTRO WAS THEIR LAST STAND. LAZY FOLKS, BLACKBERRY MOVING AHEAD...
NOTHING SYNCS... NOTHING TRANSFERS... AND NOTHING IS COMPATIBLE... IMAGINE!.... IF YOU WANT SPRINT NAVIGATION AND HAVE USED PALM PDA PHONES FOR THE LAST FEW YEARS... good luck.
I AM CHANGING CARRIERS AFTER 10 YEARS WITH SPRINT AS A LOYAL CUSTOMER... NO ONE CAN HELP. MY AVERAGE BILL WITH SPRINT IS $240 PER MONTH PAID IN FULL EACH MONTH AND NOW UNDERSTAND, THEY ARE NOT ABLE TO RESPOND TO THE NEEDS OF LOYAL CUSTOMERS.
PALM IS JUST AS GUILTY BY ENDORSING A NEW "PALM 800W" PHONE THAT CAN NOT TRANSFER INFORMATION FROM LOYAL PALM PDA CELL PHONE USERS TO THE "NEW PALM 800W", CAPABLE OF THE "NEW SPRINT NAVIGATION SYSTEM" PHONES.
TRY AT&T WITH THE IPHONE. MAYBE IT WILL TRANSFER DATA, SYNC WITH MAC AND BE AN ASSET NOT A MAJOR PROBLEM.
THE OTHER OPTION IS TO TRY THE "BLACKBERRY'S". UNLIKE PALM, THEY HAVE STAYED UP WITH TECHNOLOGY AND HAVE NEW PHONES OFFERED BY SPRINT THAT ARE COMPATIBLE WITH "SPRINT NAV" AND CAN TRANSFER OLD PALM FILES.
Post relates to: Treo 800w (Sprint)

Respectfully, I can understand your frustration but no windows mobile based device is supported to sync to a Mac. Certainly this is frustrating but I would suggest research in the future if you require certain features in a product.
Post relates to: None

Keys lost in converting from sybase to oracle

I am trying to convert from sybase 12 to oracle 10 using the migration workbench.
The oracle data base created does not have the primary keys that were in the sybase data base. I used the tool to create migration scripts, Create.sql and Drop.sql. These scripts create the tables but do not have primary keys in them.
Another question is I have user types from the sybase database. Is it possible to change them in the tool? Right now it looks like I can only change the basic database types as in smallInt.

Hi <Please Supply Your Name>,
What version of SQL Developer are you using?
"Create.sql" and "Drop.sql" sound like old OMWB names, Just want to double check.
Thanks
Dermot.

Converting from unsigned int / short to byte[]

Can anybody help me, I am trying to convert from:
- unsigned int to byte[]
- unsigned short to byte[]
I will appreciate your help lots. thanks.

@Op.
This code converts an integer to a byte[], but you have to consider the byte order:
        int value = 0x12345678;
        byte[] result = new byte[4];
        for (int i=3; i>=0; i--) {
            result[i] = (byte)(value & 0xff);
            value = value >> 8;
        }This is another option:
        int dummy = 7;
        ByteArrayOutputStream os = new ByteArrayOutputStream();
        os.write(dummy);
        byte[] bytes = os.toByteArray();Kaj

Converting from WAV to MP3 using Creative MediaSou

I am trying to convert from WAV to MP3 using Creative Media Source Version 3.30.35. The program says it is converting the file to MP3 but when it has finished and I examine the properties it still says the file format is WAV. Can anyone shed any light on this, thanks?

It doesn't change the original file - it creates a new file in the new format. Check where your file destination is set to in the Audio Converter screen.
PB

I am trying to convert a .fla file to an .flv file, is there an easy way to achieve this.

I made several movies using symbols and motion twens and now wish to save these as an flv to play in a web browser.
Could someone please respond with an easy solution as I am just learning about this.
Thankyou.

Cheers for the head up, it worked, now I feel like a simpleton. I only saw the choice for doc.fla and thought it must be complicated.
Kind Regards
Andrew Whitehead
[email protected]
CONFIDENTIALITY - This email and any files transmitted with it, are confidential, are intended solely for the use of the individual or entity to whom they are addressed. If this has come to you in error, you must not copy, distribute, disclose or use any of the information it contains. Please notify the sender immediately and delete them from your system.
SECURITY -All email is scanned with Kaspersky Internet Security 2010. Please be aware that communication by email, by its very nature, is not 100% secure
VIRUSES - Although this email message has been scanned for the presence of computer viruses, the sender accepts no liability for any damage sustained as a result of a computer virus and it is the recipient’s responsibility to ensure that email is virus free.
AUTHORITY - Any views or opinions expressed in this email are solely those of the sender.
Date: Thu, 25 Feb 2010 11:48:11 -0700
From: [email protected]
To: [email protected]
Subject: I am trying to convert a .fla file to an .flv file, is there an easy way to achieve this.
No worries, that is very simple to do.
Just click on File--> Save As and select your "File Type" and select as "Flv."
Let me know how it goes and if you have any questions regarding Flash, please feel free to ask me here or sending me an email.
Hope this helps,
Vicente Tulliano
>

How do I convert files from .mts to something recognizeable by iMovie?

I've been trying to convert .mts files saved on a hard drive (I don't have the original file structure from the camcorder) into into something readable by iMovie. I have tried all the available formats in Toast Titanium, but the converted files are always greyed out in iMovie when I try to import them.
This has been extremely frustrating, and has led me to wonder what Apple was thinking when they made iMovie so picky about what it will accept. I've looked on various forums, but haven't found any solutions to my proble, so any help here would be greatly appreciated.

Also, have a look at Voltaic here:
http://www.shedworx.com/voltaichd
Before purchasing my Intel MacBook Pro I used a much earlier version of Voltaic to convert my AVCHD footage into AIC (Apple Intermediate Codec) for use in iMovie '08. It was slow but worked very well.
iMovie '09 actually converts AVCHD clips into the AIC format when importing the MTS files from a camera or from a FULL camera archive. The full archive includes all the contents of the camera, including the clips index - as you've discovered. However, Voltaic only needs the clips, not the full camera contents.
John

Trying to convert from .mts to .flv

Similar Messages

Maybe you are looking for