Trying to create a hostname network between iphone and desktop

I am trying to make a remote connection to my desktop from my iphone in order to use iControlBits App and Transmission on my desktop.
I have a hostname which I created with dyn.com and the Mac OS X client installed on my Mac and it has a green light.
I enabled NAT port forwarding on my Airport Extreme.
I have a Motorola SurfBoard Cable Modem that has a dyn.com setting, I turned that on.
I have read that this function on the SurfBoard does not work, also I am not sure if I still have to do any port forwarding on the modem/router.
I love any thoughts on where to start troubleshooting?
Thanks,
Henry

This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
1. Unlock the network on your Mac make it an open network
2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
Cheers and best of luck
Message was edited by: Andrew T.

Similar Messages

  • Connection between iPhone and desktop Mac

    OK so just how connected are iPhones and desktop Macs now? I ask because I just deleted mail from my iPhone and it [seemed] as if the same mail was deleted from my iMac. And this was not mail using my iCloud addy.

    Yes that is what I observed.
    There have been other strange things going on with Mail on both the iPhone and the iMac so I wouldn't be at all surprised if this was one of them, but still I thought I might get a hint on this problem.

  • Matching Notes formatting between iPhone and desktop

    Ever since I switched from Marker Felt to Helvetica as the Notes font on my phone, I've had trouble getting the text to display in a consistent manner between the phone and my desktop after notes are synced (via iCloud). For example if I make a note on the phone, the type lines up cleanly on the lines. But if I make any changes, type sizes change and are inconsistent within the note itself, and type no longer diplays anchored to aline, but rather sort of floats above or below. I've tried every Helvetica font size in Mail's preferences for Notes, but nothing works right. Has anyone else had this problem?
    Thank you...
    FH

    Yes that is what I observed.
    There have been other strange things going on with Mail on both the iPhone and the iMac so I wouldn't be at all surprised if this was one of them, but still I thought I might get a hint on this problem.

  • How to create a wifi network between Mac and iPhone

    Hi there,
    I have just wired Internet at my house, and i would like to create a network with the wifi of the mac, to connect my iPhone to the Internet.
    Is that possible?
    i have tried to do, I've created a network, encrypted it, the iPhone recognize it, but when i try to use safari, the following message appears.
    "safari can`t open the page because it can't find the server"
    So, is that possible and i am doing something wrong, or it isn't possible?
    thx in advantage
    Marcelo França
    Brazil

    This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
    1. Unlock the network on your Mac make it an open network
    2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
    3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
    If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
    Cheers and best of luck
    Message was edited by: Andrew T.

  • HT1491 I created my account im my iphone, and now I´m trying to buy with my ipad and the site make questions....so I want to know where do I can find this questions in the site...

    I created my account im my iphone, and now I´m trying to buy with my ipad and the site make questions....so I want to know where do I can find this questions in the site...

    I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

  • Network between Vista and Mac

    i'm trying to create a network between a Vista desktop and my Macbook Pro for files and printer sharing.
    after lots work with setting on Vista, I now can enter in MacbookPro folders from Vista. the problem is by Mac side: i can't find the printer connect on Vista (and shared), and the icon of PC don't appear on Finder, so i can't enter on Vista's folders. the problem with file sharing is strange, cause only one time, today, icon of PC was appeared on Finder (come back to Stop of Mac)..... i've traied with the same method another times, without success...
    I don't now what to do. I hope someone help me
    Message was edited by: -Slevin-

    I have limited knowledge but will try to help you as I have battled through this myself recently...You will lose nothing if you give it a try!
    In System Preferences open the Sharing folder. Check the boxes to enable 'File' & 'Printer' Sharing. In the same open window select 'Options'.. Here I have Share files and folders using AFB and (importantly) also Share files and folders using SMB. - 'on' should be checked and 'Account' should i believe be the name assigned to your Macbook. - select 'Done' and then also close the 'sharing' window in sys preferences to take you back to the desktop.
    In 'Finder' select the 'Go' option in the toolbar. Select connect to server from the drop down menu. You now need to enter the server address which will be the name of your Vista Pc - enter as follows: smb://(your vista name).. you may have to also enter the password for the Vista machine if it is configured in this way. ( It has been a while since I completed this so a little rusty here!)
    If you have entered the correct information when you hit 'Connect', your Macbook should find your Vista desktop that has previously not been appearing in your Macbook 'Sharing' section - this was the issue that I was originally experiencing. You should now see the Vista machine in the Sharing section of your Macbook.
    If this has been successful to here... This will enable access to try to solve the printer sharing problem? I think this one is beyond me as there are so many different configurations/installation options dependent upon the type of printer and network configurations.
    It is possible to configure your Macbook to automatically find your Vista machine at startup if it is not found as a matter of course, which I perceive to be the case here... Try this to automate connection at startup..
    Go to Sys Preferences and sect 'Accounts' you may have to enter your password to initiate changes. Making the assumption that you are connected now to your Vista machine and it is showing in the 'Shared' section of 'Finder'- select the 'Login Items' option and then select the '+' under where it states 'To hide an application when you log in etc etc.
    From the window that opens you will now select your Vista machine from the left hand folders menu. when done click 'Add' and close windows to return to your desktop. Re-start the Macbook to check whether the Vista machine will now load to the Mac automatically at startup.
    I hope this works for you as it has for me - The non discovery of the vista machine by the Mac was driving me round the bend

  • Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

    bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
    I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

    Hi russellpaton,
    Thanks for visiting Apple Support Communities.
    If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
    If you can’t use a Bluetooth accessory or car kit
    Cheers,
    Jeremy

  • No connection between iPhone and computer

    I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
    Please help me.
    Sorry for the bad english.

    See Here...
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes
    iPod appears in Windows but not in iTunes
    Also, Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Curious... Syncing Issues Between iPhone and iTunes?

    Just curious... the past several months I have noted various concerns around "syncing" between iPhone and iTunes... yet don't recall any mention of whether it occurs between MAC OS or WIN hardware (desktops and or laptops). Furthermore, I am interested if anyone can comment whether these sync issues occurs mostly on TIGER or LEOPARD OS when accessing iTUNES. (Guess I should pay more attention to the noted OS field.
    I ask because I am considering an upgrade to LEOPARD by end of month and don't want to jeopardize my syncing to my iPhone if it is a LEOPARD related issue. Thank you

    I'm running Leopard and I've never experienced any sync issues.
    These discussions include mostly problems, which is what these discussions are for - a user to user support forum for technical support issues and questions.
    Which particular issue are you referring to?
    Before installing a major OS X upgrade such as Leopard over a previous OS X version, it is a good idea to create or update your existing backup of important data stored on your computer's hard drive - including your iTunes library, photos, contact info, calendar events, documents, etc. I've never experienced any problems installing a major OS X upgrade over a previous OS X version, but I always update my computer's backup immediately beforehand to be on the safe side.

  • I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

    I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks

    Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.

  • How to sync mailboxes / folders between iPhone and iPad

    How does one sync email folders between iPhone and iPad ?

    Hi Doc,
    I have just been on the phone to Apple for over 2 hours ! Both devices were already on IMAP . It turned out that one particular folder was a rogue and did not sync between desktop, iPhone and iPad. I created a new folder dragged every email into it from my desk top , deleted the original folder and all emails in that folder are now synched. Even Apple was baffled but the problem is now resolved so thank you for your assistance .
    Regards,
    Salmon Man

  • I created a playlist on my iphone and it created multiple empty playlist

    Does anyboydy have the same problem?
    I created a playlist on my Iphone and suddently thousands of empty playlist with identifcal name appeared everywhere.
    Since then, my music on my iphone freezes.
    I tried to remove with automator on my computer, but when I refresh the Itune match, they reappear..

    If your Mac is signed into your account with Documents & Data syncing checked in System Preferences>iCloud, it should have received a copy on your Mac.
    Open Finder and navigate to "~/Library/Mobile Documents/com~apple~Pages/Documents" (without the quotes) from the Go>Go to Folder Menu.  If this folder exists on your hard drive, launch Time Machine and go back to an earlier point in time to see if your missing document appears.  If it does, restore the most recent version available.

  • How to sync iCal between iPhone and MacBookPro without MobileMe?

    Hello,
    How can I sync iCal between iPhone and MacBookPro without MobileMe?
    I'm still using MobileMe, but I will stop soon.
    I'm using my iPhone in India a lot to create new events or to add new contacts. At the end of the day I would like to able to sync it with my MacBookPro without using MobileMe. Internet Connection is often very bad in that area. The iPhone I only use without UMTS and all that Data Transfering stuff. Best for me would be to sync directly by wire or Bluetooth if possible. If you have a solution with and without Internet Connection, that would be very helpfull to me.

    On the Mac, in iTunes with iPhone attached, click on the iPhone section. Go to the "info" tab. There you will see a list of items that can be synced. Make sure that "sync addressbook contacts" is checked, along with the appropriate choices under it.
    Don't know what else to say, it works fine here.
    Hope this helps.

  • How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

    How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

    When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
    For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

  • I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this?

    I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!

    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Maybe you are looking for

  • How to install a CMS

    hi friends we are implementing SAP HR in our company. we have ECC 5.0(Aix 5.3 64 bit with oracle 9i) and we have a requirement to implement CMS (content mangement server) for the payroll & uploading of employee photos. could you please help in provid

  • Batch Capture Error: Timecode Error: End of Tape Reached

    I have been having issues doing batch capture with my JVC VS30U. I logged all my clips on the fly and did the entire tape, so the OUT point of one clip is the same as the IN point of the next clip. When I attempt to batch capture it gives this error

  • Background color change for  XML Template

    Hi All, We have created a xml template for creation of news using xml form builder. When we are creating a news by using this template the background color of the news always shows SAP default color (light blue) for both Renderlist and Show forms. Ou

  • Emulation d'un port com via un port USB en LabView

    Bonjour, Dans le cadre d'un projet, un FPGA (vertex V6) m'envoie des trames de données à interpréter dans LabView. Le soucis qui se pose est le suivant, voulant traiter les données dans LabView, comment est-ce que je peux paramétrer le NI-VISA pour r

  • Lumia 1320 problem

    i was charging the battery and when it become fully charged and removes the usb from the device , the screen got weird and colurs also and the phone hangs ,,, any idea ?