Trying to create a property that has a structure to it

Hello:
I am trying to create a property that has a structure to it. Specifically, I am trying to create a multi-valued property called checks. This property is composed of check number, check date and check amount.
The data for this should display like the rows in a table, like an Excel spreadsheet.
I realize this is a tall order. However, is this possible? I have tried the composed of feature, but did not find this to work.
The best I could come up with so far is to have three multi-valued properties each for check number, check date and check amount. The user would then need to ensure that the first entry for check number applies to the first entry for check date, and then the second entry for check number applies to the second entry for check date, and so on, and so on...
Any ideas?
Thanks.
Bill
(508) 259-6605

Hi,
You have the choice between xml or pdf, in later versions of designer you can choose with a dropdown on the email button Object palette, the "Submit As";
In earlier version you had to edit the XML Source and change the format from xml to pdf (or vice-versa);
Regards
Bruce

Similar Messages

I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button. When the butten is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format. Is there a quick fix?

I am creating a form on LiveCycle Designer and I am trying to create a form that has a e-mail submit button. When the button is utilized it attaches the form to the e-mail in an plain text .xml format rather than the pdf format. Is there a quick fix?

Hi,
You have the choice between xml or pdf, in later versions of designer you can choose with a dropdown on the email button Object palette, the "Submit As";
In earlier version you had to edit the XML Source and change the format from xml to pdf (or vice-versa);
Regards
Bruce

Trying to create a service that starts at boot

People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:
svcs -a | grep patch
disabled       18:23:23 svc:/site/patch-install:defaultI have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.
BTW, I do not want the login prompt to appear until my method is complete.
Thanks.
-mschwage
Here fyi is my /var/svc/manifest/site/patch-install.xml file:
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<service_bundle type='manifest' name='Patches:patch-install'>
<service
        name='site/patch-install'
        type='service'
        version='1'>
        <create_default_instance enabled='false' />
        <single_instance />
        <dependent
                name='patch-install_single-user'
                grouping='require_all'
                restart_on='none'>
                <service_fmri value='svc:/milestone/single-user' />
        </dependent>
        <exec_method
                type='method'
                name='start'
                exec='/var/tmp/S92delay'
                timeout_seconds='86400' />
        <exec_method
                type='method'
                name='stop'
                exec=':true'
                timeout_seconds='0' />
        <property_group name='startd' type='framework'>
                <propval name='duration' type='astring' value='transient' />
        </property_group>
        <stability value='External' />
        <template>
                <common_name>
                        <loctext xml:lang='C'>
                        Install patchset upon boot.
                        </loctext>
                </common_name>
        </template>
</service>
</service_bundle>

Hushpuppy wrote:
People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.I'd probably create the service now (by importing the manifest manually rather than waiting for the reboot), then set general/enabled in the default instance to be be true with svcprop. That should tell it to start at boot, but not enable it immediately.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:Yes, that's the default. Or you can load it immediately to create the service now.
# svccfg import patch-install.xml
I have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.There's a difference between a "service" like network/smtp or console-login and an "instance" like network/smtp:sendmail or console-login:default. In most cases, you just want a single "default" instance of your service. The above line sets the default instance 'enabled' property to true or false. When I import your manifest as is, the service comes in as 'disabled'. If I set it to true, it comes in as 'maintenance' (almost certainly because it was enabled, tried to start, and couldn't find the start method on my machine).
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.'profiles' are loaded exactly once, and they are mainly used to set certain services to enabled or disabled.
3 of them are loaded if present, platform.xml, generic.xml, and site.xml. The last is not generated by the OS, but left for you to use. But it's usually only useful as a "first boot" type thing. Because if you make changes to it, it will not be reread. This isn't usually a problem because after first boot you're in control of the services. The usual thing is that at first boot the manifests load to create services, then the profiles are loaded to set then enabled or disabled. This isn't possible before that point because there's no service to modify yet.
BTW, I do not want the login prompt to appear until my method is complete.Any login prompt like a network login, or only the console login prompt? If the latter, then you'll want a dependency so that system-console-login depends on your service. But if your service has a problem at boot time, you'd make it difficult to log in.
Darren

Creating a PDF that has editable fields and replaceable images

I've been trying to figure out how I can create a PDF that has editable texts and replaceable images. I'm working for a company in which all computers only have Adobe Reader as means to view or edit a PDF file. So far I have managed to create a file that has editable text fields with customized appearance, which is great! The next step however was to create 'fields' that can be filled by an image. Is there a way to create replaceable images with LiveCycle or any other prorgram for that matter.
My goal is simple: Create a PDF that has editable textfields and replaceable images. All of which should be done in Adobe Reader.
I'm using Adobe Acrobat X Pro to create this file and I'm wondering if Live Cycle can help me with this problem, or if this is even possible to begin with. Thanks in advance.

Your goal is very simple with the LCD. You are have to use only an Image Field (important no Image) from the object library.
Any time you can click on it and select a new picture.
Hope this information is helpful?
Kind regards Mandy
PS: Oh I opened this tab and there are no answers at this time

Hello, I trying to create a program that would run a household furnace. I can't find a way to set timers for the ignitor,flame sensor and blowers. Any thoughts.

Hello, I'm trying to create a program that would run a household furnace. I can't find a way to set timers foe the ignitor,flame sensor and blowers. Any thoughts would be greatly appreciated. Thanks, primetime

In the detailed help for the event structure there is a link to caveats and recommendations for using event structures. It is a good starting point.
It is courteous to let the Forum know when your questions are related to a school assignment or homework. We are glad to help you learn LabVIEW, but do not do your homework for you.
You have learned the major disadvantage of the sequence structure: It must run to completion before anything else can happen.
If you are building a state machine (typically a while loop with shift registers enclosing a case structure with one case per state) and having trouble with timing, then think about your requirements. Apparently you have some time delays, but under certain conditions you must terminate a delay/wait and do something else. One way of doing this is to have a Wait state. The wait state has a short delay, determined by the minimum time you can delay responding to a changed condition, and a check to see if the required elapsed time has occurred. If the time has not elapsed, the next state is the Wait state again. The state machine can repeat any state as often as necessary. So a 15 second delay could be implemented by going to a Wait state with a one second wait 15 times. Any error or new command will see a response in no more than one second.
Lynn

Trying to create a text that is on fire or more like a hot branding iron

Trying to create a text that is on fire or more like a hot branding iron

Something like this?
That was from a project I did a few months ago. Sounds similar to what you want. I did that in After Effects.
Basically all I did was add a glow effect to the text and messed around with the glow parameters. The black smoke is animated and moves on the actual video and is basically some pre keyed smoke footage that I had. The smoke was originally gray but black looked cooler.
I'd say it's pretty close to your hot branding iron thing.

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

Can you create a template that has a header and footer to forms?

Can you create a template that has a header and footer to forms?

Yes but how are they going to create the Landscape versions?
The problem with doing it in Pages '09 as rotated content is that the Headers and Footers are not rotated and there is inherent clumsiness in the rotated content usually being too large for the page when viewed at 90°.
Best to make it in two or more separate documents.
Peter

How do i create a report that has drill-down with class?

How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

can i know ur email address.
this is my other one coding
but problem is very very slow when i 1 see my output
TABLES: proj, coep.
*&            TYPES DECLARATION                                        *
*TYPES: BEGIN OF tb_coep,
         wtgbtr TYPE coep-wtgbtr,
      END OF tb_coep.
DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
TYPES : BEGIN OF t_date,
          year(4) TYPE n,
          month(2) TYPE n,
          day(2)   TYPE n,
       END OF t_date.
*&            SELECTION-SCREEN                                         *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN END OF BLOCK b01.
*&            TOP-OF-PAGE                                              *
*&            fetch the data for the list                              *
SELECT * INTO int_proj FROM proj where
         pspnr in so_pspnr.
append int_proj.
CLEAR int_proj.
ENDSELECT.
SELECT * into int_coep FROM coep WHERE
         wtgbtr in so_pspnr.
append int_coep.
CLEAR int_coep.
ENDSELECT.
LOOP at int_proj.
write : / int_proj-pspnr, int_proj-post1.
ENDLOOP.
LOOP at int_coep.
write : int_coep-wtgbtr.
ENDLOOP.
Edited by: Dickson on Jul 10, 2009 10:53 AM

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. Any suggestion?

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind Regards

Can you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4

I am trying to create a slideshow that switches pictures every 0.3 seconds, however it keeps taking me back to 1.0 second?

I am trying to create a slideshow that switches pictures every 0.3 seconds, however it keeps taking me back to 1.0 second?

What application might you be using to show the slideshow?

How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

How do you resolve error code 36 when trying to restore an iPad that has been reset to original settings?

MB-
As far as I can tell, Error Code 36 is an "I/O Error". It may mean you have a bad USB cable between the iPad and your computer, or the cable was not plugged in firmly.
See if this helps with your Restore: <iOS: Unable to Update or Restore>.
Fred

Trying to create a query that shows Sales Order/Invoice Totals as well as Paid/Outstanding/Available Down Payments

Currently working on SAP B1 v8.82
I'm looking to generate a query that will give an overall report for a given customer that shows Sales Order No, Invoice No, Sales Order Total, Invoice Total, Amount Paid on Invoice, Amount Remaining on Invoice, Down Payments Available, Open on Sales Order.
I'm not sure what the best way to select the columns in bold above. Invoice Total should be self-explanatory. Amount Paid should be any down payments or applied payments on the invoice. The balance due on the invoice (which seems to be T0.DocTotal if I'm not mistaken) should = 'Invoice Total' - 'Amount Paid on Invoice'. In the Down Payments Available column I want the total amount of money on the account or on down payments that aren't tied to a Sales Order. If a client overpaid in the past for instance and there's a credit on their account, then it should contribute to this sum. Open on Sales Order should be pretty easy. I guess it's just the sum of everything that is still open on the Sales Order. I'm just not sure what the best way to sum all the un-delivered freight, tax, and line items is. Here's what my query looks like so far.
SELECT DISTINCT T4.[DocNum] [Sales Order No],
T0.DocNum [Invoice No],
T4.DocTotal [Sales Order Total]
T0.DocTotal [Amount Outstanding],
FROM OINV T0
INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN DLN1 T2 ON T1.BaseEntry = T2.DocEntry AND T1.BaseLine = T2.LineNum
INNER JOIN RDR1 T3 ON T2.BaseEntry = T3.DocEntry AND T2.BaseLine = T3.LineNum
INNER JOIN ORDR T4 ON T3.DocEntry = T4.DocEntry
INNER JOIN OSLP T5 ON T4.SlpCode = T5.SlpCode
WHERE T0.CardName Like '%%[%0]%%'
GROUP BY T4.DocNum, T0.DocNum, T0.DocTotal, T4.DocTotal
I tried doing a little searching around for queries similar to what I need, but I could find exactly what I was looking for and I'm very unfamiliar with OJDT, JDT1, and ITR1 tables which I think might be important to finding unapplied payments...

Thanks. There's a few problems though.
1) It seems that OINV DocTotal != Balance Due. I'm seeing a number of invoices where there was a balance due, but we applied additional money (either we took another incoming payment and applied it or applied money from the account balance, etc.) and yet it still shows a total.
2) It's pulling incoming payments from different customers. I think this is because the table was joined based on "RCT2 T4 on T4.[DocEntry] = T3.[DocNum] and T4.[InvoiceId] = T2.[LineNum]" In one example I have 2 incoming payments 446 and 614. Both have the DocEntry 542, but one relates to A/R Invoice 542 (for a different client) while the other relates to Down Payment Invoice 542. *I was able to fix this by adding WHERE T5.CardCode = [%0]*
3) I'm going to work with this a little bit and see if I can alter it to make it work for me. Basically this query falls a little short on the following:
- Doesn't include incoming payments that aren't linked to a down payment invoice.
- Does not give the Invoice Total (I'd like to know how much of the SO was invoiced. DocTotal seems to give me Amount Invoiced - Down Payments. I'm not sure the best way to get this number. Maybe I could do the sum of each line * tax + freight)
- Does not give the outstanding amount on an invoice. The ARtotal [DocTotal] column gives me how much was owed when the invoice was created, but it doesn't tell me what is currently owed.
- Lastly it may complicate the query too much and could be left off, but it would be nice to see if they have any money from credits or incoming payments that has not been applied. Perhaps this would be easily accomplished by simply pulling in their account balance.

How can I create a subVI that has state?

I'm trying to simplify a VI that I inherited and I noticed a recurring pattern that IMHO should be a subVI. The pattern is that we have a digital output line that is controlled by a timer. Each output has a start time for it to activate and a duration after which it is turned off. When the state changes, a single line entry is added to a common log file and an indicator shared variable is set so that the remote host VI updates. We have a big while loop that checks the current time against each of the activation conditions. To detect when the state has changed, we're using a shift register (for each actuator). It's one thing to see the same pattern 3 times, but it's worse -- we want to sometimes use a different number of actuators. If I was writing this in C++ (with which I'm far more comfortable than LabView), I'd write a class for the actuator and instantiate it N times. The class would have member data to keep track of its state. I can create a subVI that does the meat of the design pattern, but I can't figure out how to store the previous state in the subVI without requiring it to be passed in. How do I keep the state and behavior of a VI together? Surely there's a way to do this because otherwise I can't see how you could implement state-ful algorithms like, say, a PID controller. But I'm at a loss to figure it out ...
Thanks.
Keith.

To save state in a subVI and not use that state in other subVI calls, make the subVI reentrant. When a subVI that is reentrant is called it creates a unique memory space for that subVI. This is called a clone. That memory space is where state is held for that subVI. Keep in mind that it also means that the memory footprint is going to be larger.
To set a subVI to be reentrant, open it and go to File -> VI Properties and select execution. It will be a choice on the bottom left.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

I am trying to create a Form that will act as a list. I want to import data into the form from exce

My table has a list of names with product information in corresponding columns. I want to create a form that I can import this into where every row makes a new part of the form list I create. Is this possible?
Example of what I have in excel:
Name
Product 1
Product 2
Product 3
Total
a
1
2
3
6
b
0
3
4
7
c
1
3
4
8
d
1
3
5
9
Example of what I want in Form:
Customer a 1 2 3 6
Customer b 0 3 4 7
etc.
I want to put this info into a form to make it more presentable. Can anyone help me with this?

Look at the Import/Export form data functionalities already built-in into Acrobat.

Trying to create a property that has a structure to it

Similar Messages

Maybe you are looking for