Trying to create cofile from data file
Hi All,
I am trying to create a cofile with the tp createcofile command and getting the following error .....
---> tp CREATECOFILE DC1K900012 pf=/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL
This is tp version 372.04.65 (release 701, unicode enabled)
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/DC1KK900012.DC1: Not a directory
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/SLOG1021.DC1.LOC: Not a directory
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG1021.DC1 for more details)
Please help with the syntax of creating a cofile ....
Thanks in Advance.
Regards,
Revanth Kumar
Hello Revanth,
the correct syntax is:
tp createcofile <transport_request> pf=<path_to_tp_profile> -s<extra_r/3_SID> -Dtransdir=<transport_directory>
where "-s<extra_r/3_SID>" is used only if you're generating the file to another system ID. Normally the correct system to connect to for export purposes is the source system and this normally is the same as the first three characters of the transport requests name. However in some cases this is not true and you want to specify a extra R/3-system name. In this case
you can use -s option as described above.
Best regards,
Tomas Black
Similar Messages
-
Unable to create cofile from data file
Hi All,
I am trying to create a cofile with the commane **** tp createcofile <TR>**** and getting the following error .....
---> tp CREATECOFILE DC1K900012 pf=/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL
This is tp version 372.04.65 (release 701, unicode enabled)
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/DC1KK900012.DC1: Not a directory
/usr/sap/trans/bin/TP_DOMAIN_DC1.PFL/tmp/SLOG1021.DC1.LOC: Not a directory
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG1021.DC1 for more details)
Please help with the syntax of creating a cofile ....
Thanks in Advance.
Regards,
Revanth KumarIt may be because of TRANSDIR profile entry pointing to /usr/sap/trans/bin/TP_DOMAIN_DC1.PFL instead of /usr/sap/trans.
its not able to access tmp folder under the trans file system. -
Choose File Form Data Create Spreasheet From Data Files
I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
What am I not doing properly? How do I accomplish this task?
Thanks!Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
Best wishes,
Kevin Palmer -
Creating spreadsheet from data files
Why do I get the numbers in square brackets e.g. f[0].p1[0].Name[0], when I collate data using the 'Create spreadsheet from data files' command. I only want to export object names as column titles in Excel. This driving me mad!
I got the same problem as Zali.I really need some one help regarding regarding this topic.
-
Extra zeros in numeric fields when I create spreadsheet from data files
I created a form with Live Cycle, and then in Adobe I use the option "create a spread sheet from data files" to import the answers to a xls file.
I have two problems with this action: the first one is that I get 8 extra zeros in each numeric field, the second one is that fields are ordered by type and not by appearance.
I tried a different approach importing directly in Excel, in that way there are no extra zeros and the order is correct, but I get just one form each time, and in a "stairways" fashion (i. e. first field in A1, second in B2, and so on)
I'd appreciate any helpWhere do you find the command "create a spread sheet from data files"?
Anyway i have a similar problem: when i export data in a .csv file and than i import it in excel, i always get 8 extra zeros... how can i solve the problem? -
How to create Exe From Data files
my requirement is very much similar to registration of file extension.
lets say if you have a file with extension .xyz then you can decide which program should invoke .xyz but instead of any other extension i need that extension of my file should be .exe
and when user double clicks on this exe files the file should get opened with my own program, but if the file is true .exe (i.e. Created by some other program) then it should not get invoked by my program...
i dont know how to do this but i know this is possible
e.g. Flash can create an exe files from their .swf files which when opened run using flash player (but it doesnt get fooled by any .exe file. also flash exe files have different icons)
similarly winzip can create self extracting exe files from .zip files
can anybody help me out
the files i am trying to create will have numeric data in spreadsheet format and when launched the player will show the data in animated format.
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blogi think i will briefly describe the things; what exactly i want to acheive
my client will have one application which will acquire data and log them into files. but he want to distibute these files to other people who will not have the application developed by me.
he wants that file should show the reports in specific way. but to see those reports end user should not be required to install any specific application.
i know that this thing is possible. as per msdn developer can include any data (text, graphics, audio, video etc.) inside exe in the form of resource file. (and there are programs are avaiable on internet which allow to extract, edit, add resource files inside exe)
what i dont know right now is how i can access the resource file inside exe
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog -
Unable to use B2B Document Editor tool to create guideline from data file
Does anyone successfully used the B2B Document Editor tool to generate the guideline doc from an HL7 data file ?
I attempted to use the SpecGenerator feature of this tool to create a guideline from the "a01.xml" sample file in the HL7 tutorials (came with the B2B installation" and the wizard kept on giving me "parsing errors" message below
"The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect."
Any idea why ? I did not alter the sample file in anyway -- its format is exactly the same as when it was installed.
Any helps are appreciate !!Hi,
I would suggest that you learn the B2B product starting with the HL7 tutorial. Start by importing the export files and follow the instructions to make the system work end to end.
Next, you want to configure for the HL7 tutorial manually using the ecs and xsd files provided in the HL7 tutorial directory. Again, ensure that the system work end to end after you have done the manual configuration.
Next, you create a new ecs and xsd file using the Document Editor from scratch and use them in your manual configuration. You can use the same doctype and version as in the tutorial so that you can be familiar with the Document Editor and at the end of this exercise, you know you have done things properly if the system works end to end. The documentation for Document Editor is mainly in the Windows Help section.
After the incremental steps above, you will have the knowledge to implement the document type and version of your project. Going straight into the requirements in your project makes it difficult to debug because they are too many moving parts.
Hope this helps,
Eng -
Error in running Extract Definition Upload from Data File concurrent.
Hi all,
Am trying to upload the 834 Extract Layout from the data file by running the concurrent program, Extract Definition Upload from Data File.
After running this concurrent program am getting the Extract Layout definition with Record layout and Data elements within it.
But some record layouts has the changes at their repeating level in that.
Please suggest me how do i get the same repeating levels for the record layouts when i move the 834 benefit extract layout definition
from one instance to another instance.Hi,
We have exactly the same error in IBolt. This error happens sometime and we don't find the reason.
IBolt has been upgraded to Version 3.1 SP1 and a fix has been developed by the support. After installation, we've work hardly during 2 days for testing all the flows by the customer without having this error.
Ibolt works as a service and when this error occurs, the service stopped and must be restarted.
In our flows, we have put a delete of the observer.dll file just before the rest of the flow but it doesn't solve the problem.
Deleting the directory can be temporarly a solution but the error come back another day.
Each time the SBO client or DTW is started, the %temp%\SMS_OBJ_DLL directory is created...
When you just delete the observer.dll file and leave the rest of the directory like it is, the file is re-created when you start and log to SBO. I would say that this file is a copy of another file observer_800178.dll (800178 depending of the version of SBO yoi have). 800178 corresponds to SBO 2007 A PL 42.
Do you have more information since your post has been send ?
Thanks in advance for your help.
Best regards. -
Creating pdf from different file formats in binder
Hi.
I tried to create a combined pdf file from .docx, .doc, pdf, .xlsx files using drag and drop function in the Adobe XI trial version. I got a 31,000 page pdf document (instead of about 50 pages) in the binder for all the combined files. Most of the pages were blank. Can anyone give the reason for this. How to overcome the problem? If I don't get satisfactory solution to this, I don't intend to buy the product after the trial period.
Thank you.What do you get if you just print any of the documents to the PDF printer? Never heard of this problem, so trying to troubleshoot is the only way to trace it.
-
Cofiles and data files in trans dir
hi everyone,
We will be doing a lot of transports in a day or in a week. What will happen to the older cofiles and data files in their corresponding directories? will they be removed from trans/data and trans/cofiles automatically or do we need to take back up of these directories?Actually there are 3 transport profile parameters which can be used to control this:
1. DATALIFETIME
2. COFILELIFETIME
3. OLDDATALIFETIME
Check more here:
http://myadmin.wordpress.com/2007/02/19/sap-r3-correction-and-transport-system/
Also OSS notes: 41732 &312843. They will clear some more concepts.
Regards.
Ruchit. -
Error while trying to import a repository data file in the B2Bconsole
I am trying to import a repository data file with the delivery-channel element
and attributes as below. <delivery-channel name="GM_DC" syncReplyMode="none" nonrepudiation-of-origin="false"
nonrepudiation-of-receipt="false" secure-transport="true" confidentiality="false"
routing-proxy="false" document-exchange-name="GM_DE" transport-name="GM"/> I have
modified the WLC.dtd present in the lib\dtd subdirectory of the WebLogic Integration
installation directory to add the syncReplyMode attribute. When i import the xml
file,i get the following error com.bea.b2b.B2BException: ERROR: Invalid document,
file 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\B2B_COV_Export.xml'. at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown
Source) at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown Source) at
com.bea.b2b.bulkloader.BulkLoader.load(Unknown Source)
Please advise,
Thanks in advanceHello Esther,
the problem seems to be that the temp folder of the target Integration Builder system can't be found:
'The system cannot find the path specified
at [..] FileAccess.getTempDirectory([..])'.
You'll experience the same problem if you try a file based import or export within the Integration Builder directly.
I would recommend to continue the search there. You could check if the environment variables (for Windows: TEMP and TMP) of the OS of the system with the target Integration Builder to an existing path. Check also if the WebAs can access this path.
Good luck
Frank -
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
How to create database from .sql file
how to create database from .sql file..?? i put the sintax query in a sql file.. and i want to call it in java code..
ho to do it..??why do you want to do this from java?
i just don't see the point.
find your dba and have him/her run it for you -
[POL-3309] trying to use datapage from different file.
Getting this error trying to access both the ESB and BPEL datasources in SOA Suite 10.1.3 GA.
Any ideas how to fix?I am also getting same error message when I am trying to establish a olite connection. Moreover I got this error when I opened BPEL console :
Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "jdbc/BPELServerDataSourceWorkflow". The exception reported is: [POL-3309] trying to use datapage from different file
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
Please provide solution..... -
Hello All,
DB version: 9i Rel 2
Which Oracle command line tools allow data to be extracted from data files that are NOT ATTACHED to a database?
DNOracle Support has a tool called DUL, Data UnLoader, to extract data from data files. They have a nice rate they charge for the service as well. There are other groups that have such tool, and they charge the for the service as well.
Maybe you are looking for
-
My iPod Touch 4 is stuck in recovery mode & iTunes doesn't recognize it
I ran an IOS Software Update on my Ipod Touch 4, during which the Ipod totally locked up. Then the iTunes icon appeared on the screen, with a power cord symbol. I plugged it into the computer, and opened up iTunes. iTunes said the iPod was in recover
-
At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll. I have uninstalled it and reinstalled but it does not fix the problem. Happened after Itunes updat
-
how can we generate a spool for email in F110 payment run can we regenerate a new spool for email for an already run payment run.
-
Binary file readed from Labview and Borland C++ v.5
Hi Everybody! My problem is reading binary file from Labview 7.0 and Borland C++ version 5 is not the same. Only one difference is "space". Reading from Labview I got "00" (decimal) and reading from Borland C++ I got "32". I also try to read this bin
-
Deauthorise computers per year
You may only deauthorise all computers once per year. You must wait until bla bla bla What should i do for this problem? I can not sync my iphone.