Trying to create Divx/Xvid MPEG-4

Have created a little video promoting our charity in Premiere Pro CS3 and am trying to get it onto a Digial Photo Frame to play when we do displays.
My problem is getting the video into a file format the DPF will accept. The rather limited instructions say it supports
"AVI (M-JPEG/MPEG-4/DIVX/XVID/), MPEG-1@VGA" and later it says
"DivX/Xvid MPEG-4 @640x480/2000kbps"
Am very much a beginner and have tried various export settings but the DPF doesn't recognise any of them. To be honest I'm rather faffing in the dark as I don't really know what the above means.
Would be very grateful to be pointed in the right direction.
Many thanks
(XP Pro windows)

Thanks Ann.
For anyone else reading this, instructions how to use divx in premiere are at http://www.divx.com/divx/windows/codec/guides/premiere.php
Still doesn't actually work on my digital picture frame, but having got this far I've gone back to the suppliers to see if they can help.
Sarah

Similar Messages

  • Windows 7 & CS4 Encoding Problem: DivX / Xvid / Lagarith

    I'm having a lot of problems exporting a custom video file (1024x768) on CS4 and Win 7 64 Ultimate.
    I installed:
    Xvid 1.1.3 = Does nothing, gives error when trying to execute.
    Xvid - Nic's build = Various codecs, XVid crashes CS4, ffshow crashes CS4, DivX creates 10 Gig files that cannot be
    used.
    Lagarith Lossless Video Codec cannot be installed.
    Uncompressed creates a 15 Gig file that cannot be used.
    Encoding takes 3+ hours on a 5 Gig AMD X2.
    The video clip is only 5 minutes long, how can I solve this export problem?

    The readme file of lagarith says:
    Installing the 32bit version on Windows 64
    Extract all the files to a folder
    Open up a command prompt (start->run: cmd)
    Change directories to sysWOW64 ("cd C:\windows\syswow64")
    Type the following (replace example_path with the actual path to the extracted files), then hit enter:
    rundll32.exe setupapi.dll,InstallHinfSection DefaultInstall 0 c:\Legarith\lagarith.inf
    This method can also be used for installing other 32bit codecs such as Huffyuv that install via a .inf file.
    What I did:
    Extracted the files: there is a dll file and some other txt files.
    Copied all the files to: c:\Legarith\
    Copied these files to the C:\windows\syswow64 directory.
    Open CMD and go to C:\windows\syswow64 directory
    Execute:
    rundll32.exe setupapi.dll,InstallHinfSection DefaultInstall 0 c:\Legarith\lagarith.inf
    A popup pops up (LOL)
    Error
    Installation failed.
    (OK)
    Ok, any adea of how to actually

  • Can Quicktime X accept plug-in to create DivX files from H.264?

    i know quicktime 7 pro could... or does anyone know of any other good software to create DivX files frin H264? I'm running Mac OS X, Snow Leopard.
    i tried that DivX converter (DivX.com) but i got an error that the file type was incompatible...

    i know quicktime 7 pro could... or does anyone know of any other good software to create DivX files frin H264? I'm running Mac OS X, Snow Leopard.
    i tried that DivX converter (DivX.com) but i got an error that the file type was incompatible...

  • How to COMPRESS to MPEG4 (Divx, Xvid) format for MAXIMUM YOUTUBE quality?

    I'm sick of slaving away here on fcp to then upload stuff to Youtube and have it look like ***.
    YouTube suggests uploading as MEG4 (Divx,Xvid) format.
    Is there a simple setting for that format within Compressor 2? What about QT player (I don't have pro, only QT v7.2)
    Any thoughts?

    The consistently best looking stuff I've uploaded to YouTube has been from Compressor preset H.264 LAN.
    I had tried the compress-to-flv route and that worked great, but then YouTube changed its format, so it was back to H.264 LAN...
    Patrick

  • I am getting a warning message when i am trying to create a host-named sitecollection.

    Hi guys,
          I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
    http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
    When i tried to create a customer root site. I am getting a warning message
    " WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
    Application.  The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
    this port."
    I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
    Can anyone help me to solve. And i wanna know why this error message comes!!!
    Thanks in advance
    Rajendran.

    First, you shouldn't create a host named site collection on a Web app that has host header named.  Doing that implements host names at two different levels and will not work reliably.  Second I'm not sure what you mean when you say you didn't
    use the FQDN but used just the domain name.  A Full url will always be either an FQDN or a shorter Netbios name.  If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url  There is no way
    to use just the domain name.  For example, Contoso.com is the domain name.  Server.contoso.com or WEbsite.contoso.com are FQDNs.  YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
    still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain.  What is the URL for your root site and your host named site?
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • My family uses a single lap-top as our main internet connection and when we synch our respective I-pods, our I-tunes account seems to wipe-out our playlists, even though we have tried to create separate I-tune accounts.  Help!!

    My family uses a single lap-top as our home computer and several of us have i-pods that we like to synch, using I-tunes.  Although we've tried to create separate I-tune accounts, our i-tunes playlists are getting wiped out when one of us deletes songs on our I-pod and it seems as though I-tunes is not distinguishing our distinct accounts and all i-pods are being synched to reflect the latest i-pod anyone makes on their respective account.  It appears as though our distinct I-tune accounts are not being loaded on our lap-top when we sign in and unfortunately, when we're in I-tunes, there is nothing to indicate what account is on the screen.  For all the glowing appraisals apple-related products usually receive, we are finding i-tunes and its interface with our respective i-pods to be a very, very frustrating experience. 
    Can anyone shed some light on this for a family of non-techies?  Thx 
    Pegger64  

    You need to create separate Windows user accounts if you want to seperate the behaviour of iTunes for each user. That also means separate iTunes libraries for each user.
    Windows is a multi-user operating system but you are not using it properly. iTunes is not a multi-user application. No application is. You can't expect it to treat different users differently when they are all using the same computer user account.
    Do you understand what I mean?

  • Trying to create a Mozilla Persona account, but I'm not receiving the confirm credentials e-mail after three tries. Help?

    I'm trying to create a persona account for: (Email removed by mod) but when I try to sign up after I've entered my e-mail and new password, I do not receive my confirmation e-mail (after repeated attempts).

    The original url you gave me was: http://www.mozilla.org/en-US/persona/ which is in the first screenshot I provided. If I am in the totally wrong place, it is because that is where I was recommended to go.
    I cannot login with my email and password, for as I stated in the beginning, I'm not receiving the confirmation email message that validates my email address in order to create a Persona account.

  • Trying to create a shell script to cut/paste files in finder. Help needed.

    I'm trying to create an automator shell script to cut/paste. It'll function exactly like copy/paste. i.e. I'll just copy file/files with command+c like always, but then I'll create an automator which uses the "mv" terminal app to move the files which works exactly like cut paste.
    I need some help since I don't know the syntax for creating shell scripts.
    What I did so far is to do it in automator with Apple Script which goes like the following:
    on run {input, parameters}
    tell application "Finder"
    set theWindow to window 1
    set thePath to quoted form of (POSIX path of (target of theWindow as string))
    end tell
    tell application "Terminal"
    do script with command "mv \"" & input & "\"" & thePath in window 1
    end tell
    return input
    end run
    This gets the copied file path from clipboard before, as input, and then recognizes the active finder window as thePath so then executes the mv command for the input file to the thePath window.
    It doesn't work as expected since it connects both file/window paths into a single path instead of leaving a space between them so the mv command can't recognize two separate paths.
    What's the correct syntax for that line
    do script with command "mv \"" & input & "\"" & thePath in window 1
    to leave a space between input and thePath under the mv command?
    Also this requires the terminal app to be open in the background.
    After I get this to work I want to do the exact same thing using shell script within automator, so I won't need Terminal to be open all the time.
    And the next step will be to cut/paste multiple files/folders but that should be easy to do once I get the hang of it.

    Try using:
    on run {input, parameters}
    tell application "Finder"
    set theWindow to window 1
    set thePath to quoted form of (POSIX path of (target of theWindow as string))
    end tell
    do shell script "mv \"" & input & "\" " & thePath
    return input
    end run
    (45977)

  • Trying to create a Invoice based on Order need help Error -5002

    the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
    I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
    here is my code
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 0
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00001"
    oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
    'adding Line
    oInvoice.Lines.Add
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 1
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00002"
    oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
    'adding Line
    oInvoice.Lines.Add
    lRetCode = oInvoice.Add
    If lRetCode <> 0 Then
        gObjCompany.GetLastError lErrCode, sErrMsg
        MsgBox (lErrCode & " " & sErrMsg)
    End If

    Indika,
    Only set your base types...
    (not items & description)
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 0
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00001"
    oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
    'adding Line (to fill the second item line)
    ' the 1st line item is there by default
    oInvoice.Lines.Add
    oInvoice.Lines.BaseEntry = 48
    oInvoice.Lines.BaseLine = 1
    oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
    oInvoice.Lines.ItemCode = "A00002"
    oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
    'DO NOT Add THIS line
    ' (only if you want to add a 3rd line item)
    '''oInvoice.Lines.Add -> Don't add this
    lRetCode = oInvoice.Add
    If lRetCode <> 0 Then
        gObjCompany.GetLastError lErrCode, sErrMsg
        MsgBox (lErrCode & " " & sErrMsg)
    End If
    remember to add :
    oInvoice.CardCode = "your BP"
    oInvoice.DocDueDate = Now
    oInvoiceDoc.CardCode = txtDOCBPCode.Text

  • Trying to create a brush to watermark my photos. HELP!!

    So, Im trying to create a brush to watermark my photographs, but the 'define brush preset' isnt clickable, but it is clickable with any other photo i try it with. What am i doing wrong? can someone please help me? It's quite frustrating.

    Haw large in Pixels is the image?
    And quite frankly I would recommend creating a Path and using »Embed Path« instead of a Brush as Actions that include Paths can be more easily transferred without the risk of forgetting the Brushes.

  • Trying to create a simple example. Need Help!

    I'm trying to create a very simlpe examlpe using Swing components to illustrate a MVC architecture.
    I have a JFrame containing a JTree and a JButton.
    What I'd like to happen is when I click the JButton the JTree model is changed in some fashion and the the view is refreshed due to the models change.
    If anyone out there has a simple example of any MVC architecture involving Swing components I'd love to see it.
    Thx

    Sure, look at any of the Sun tutorials. For example, look in your API documentation for JTree; it has a link to a tutorial about how to use JTree.

  • Trying to create a simple database program.....help, please

    I am trying to create a database and I am having trouble gettig my code correct..........I think I am on the right track but I haven't a clue from this point, can anyone point me in the right direction as far as getting my program to have a master file and a transaction file and be able to manipulate the data........records.
    import java.awt.*;
    import java.applet.*;
    public class recordsApplet
    // Declare variables
    String lstName;
    String frstName;
    Int socSec;
    String street;
    String city;
    String state;
    Int zip;
    float rate;
    Int numofdep;
    //The buttons =
    Button Submit = new Button("Add");
    Button Change = new Button("Change");
    Button Delete = new Button("Delete");
    submit.addActionListner(this);
    Change.addActionListener(this);
    Delete.addActionListener(this);
    //get input from users
    System.out.println("Last Name:")
    lstName = dataIn.readline();
    System.out.println("First Name:")
    frstName = dataIn.readline();
    System.out.println("Social Security #:")
    socSec = dataIn.readline();
    System.out.println("Last Name:")
    street = dataIn.readline();
    System.out.println("Last Name:")
    city = dataIn.readline();
    System.out.println("Last Name:")
    state = dataIn.readline();
    System.out.println("Last Name:")
    zip = dataIn.readline();
    System.out.println("Rate of Pay:")
    rate = dataIn.readline();
    System.out.println("Number of Dependants:")
    numofdep = dataIn.readline();
    public void main(String[] args)
    //store the information in a text file
    try
    output = DataOutputStream(new FileOutputStream("mocdb.txt"));
    catch(IOException er)
    system.exit(0)
    //Print fields to text file
    String arg = e.getActionCommand();
    String code;
    if (arg == "Submit")
    code = "A";
    elseif
    code = "C";
    else
    code = "D";
    try
    output.writeUTF(code);
    output.writeUTF(lstName.getText());
    output.writeUTF(frstName.getText());
    output.writeUTF(socSec.getText());
    output.writeUTF(street.getText());
    output.writeUTF(city.getText());
    output.writeUTF(state.getText());
    output.writeUTF(zip.getText());
    output.writeUTF(rate.getText());
    output.writeUTF(numofdep.getText());
    catch(IOException c)
    System.exit(1);
    //Retrieve record from file
    System.out.println("Last Name:")
    lstName = dataIn.readline();
    System.out.println("First Name:")
    frstName = dataIn.readline();
    try
    record = new DataInputStream(new FileInputStream("mocdb.txt");
    catch(IOException c)
    system.exit(2)
    //Check first and last name and get file
    //Change data in file
    //Delete the data in file

    Sorry, but your question has nothing to do with JavaHelp. Please use another forum.
    /Mauritz

  • Need help trying to create a ActiveX registered event

    I am trying to create a register event for an ActiveX component. The problem I am having is creating the callback vi. When I right click on the VI ref and create the callback vi it is created with the user parameter as a variant. I would like this to be a control refnum. If I open the callback vi and replace the user parameter variant with a control refnum the wire from the callback vi to the VI ref is broken. How do I change the user parameter?

    Joe is correct on this one. The callback where designed to take variants as their inputs, so that they are more flexible. In addition Variants are used through out ActiveX programming.
    If you have a control reference that you want to pass into the VI, all you need to use is the "To Variant" function in the main VI to turn the reference into a variant. You can then inside the Callback VI you can use the Variant to Data VI to change the variant back to a reference; you simply where a constant of the reference type to the "Type" terminal.
    Evan
    National Instruments

  • Help trying to create a button in safari please.

    trying to create a button that runs an applescript. I have been discussing it in 101 but cross posting it here because it's not getting much interest over there.
    Any help would be nice. I have read Become an xCoder and it doesn't seem to answer my questions.
    http://discussions.apple.com/thread.jspa?threadID=1514799&tstart=0

    Is there no way to create an appcontroller that works like an applescript? Or get an applescript to be recognized so a new NSButton added to the Bookmark bar be activated?
    i.e.
    *tell application "System Events"*
    * tell application "Safari" to activate*
    * keystroke "n" using {command down}*
    * delay 0.1*
    * keystroke "l" using {command down, shift down}*
    *end tell*
    Or,
    _Something Like:_
    / AppController /
    *#import <Cocoa/Cocoa.h>*
    *@interface AppController : NSObject*
    *IBOutlet id NSButton;*
    *-(IBAction) autoFill:,delay 0.1,checkSpelling:(id)sender*
    @end
    I really don't know if that AppController looks anything like it should or if it's even close.

  • Trying to create a condition on a BW Universe

    Hi experts,
    I'm trying to create a condition on a BW-Query Universe just like below:
    <EXPRESSION>  IIF([0HALFYEAR1].[LEVEL01].[[20HALFYEAR1]].[Value] = 1 , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7] , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7]) </EXPRESSION>
    i've searched a lot till get this code, but it still giving me an error when I try to execute.
    Does anyone can please help me?
    Thanks,
    Gui Boscolo from BRZ.

    Hi David,
    Thanks for your answer, I've made the ajustments you have mention, but I'm still getting erros when i'm running a report with an object that contain this 'code':
    <EXPRESSION>  IIF(@Select(SemestreL01 Semestre Chave) = "1" , @Select(Variáveis de CálculoMontante Projetado Sem1) - @Select(ÍndicesSaldo Aplicado) , @Select(Variáveis de CálculoMontante Projetado Sem2) - @Select(ÍndicesSaldo Aplicado)) </EXPRESSION>
    As you notice, now I'm using the @select function, the quotes are in the value of HALFYEAR01 ((@Select(SemestreL01 Semestre Chave) = "1") and removing the IFF function, the expression works.
    The problem, is We need to have this IFF function at BO, because we're trying to complement a expression on BW that cannot be changed!! That's my problem at all!
    Thanks again!

Maybe you are looking for