Trying to create PAL SD DVD from 23.98fps 720P project

I'm trying to create a PAL DVD from a HDV 23.98fps 720P project and am having a few issues. All the footage is PAL and I am converting it to an SD file as it is for an SD DVD however exporting through FCP gives me black frames, using DVD studio pro to convert gives me a freeze frame effect (both of which I assume is through converting 23.98 to 25 fps) so I was told to use Compressor. I tried this but can only seem to render out a 23.98fps file as NTSC, whenever I switch it to PAL it automatically changes to 25fps as my only option.
Any help would be much appreciated as my deadline is looming.

Hi:
Are you sure that your footage is PAL 23.98 fps? I'm not involved with HDV but that sounds like NTSC frames.
What is the source of that footage?
Hope that helps !
  Alberto

Similar Messages

  • How do I create a playable DVD from camcorder footage?

    Hi, almost total newbie here. My problem is that I'm wanting to create a playable DVD from a video I've made, but all my burns so far have resulted in DVDs which will play back on the iMAC they're created on, but not on my iBook G3. This is a worry, as I'm needing to send something playable interstate, quite urgently, and it needs to be either a Quicktime movie or a playable DVD.
    So far, I've managed to get the footage into iMovie, edit the clip length and add the effects I want.
    I'm then exporting the finished clip, ready to burn. Problem is, I'm completely confused about which settings to choose. Nothing I've tried seems to give me the results I want.
    When I play back on the iMAC, it's fine. When I try to open the movie in Quicktime on my iBook, it invariably stalls or skips frames. Any playback it does give is terribly disjointed. The problem isn't the iBook, as I can play commercial DVDs on it.
    The clip is intended for public screening, and I'm on a deadline. I've been browsing the forums and have found a few tips which might help, but nothing that sounds very different from what I've done, or sufficiently clear for a non-techie like me to grasp.
    Can anybody clear this up for me?
    As a side note, my daughters have been having the same difficulty, trying to burn DVD from animations they've put together in photoshop. Their issues were solved when they selected the Mpeg format to export in, although this did result in some sight loss of quality in terms of appearance on playback. ie the images were not as crisp, edges slightly fuzzy, etc.
    After hours of frustration, we're just not sure what to try next.
    Thanks.

    You should just send ("Share") the movie to iDVD from iMovie.
    See the iMovie tutorials (in html and QT movie form) at:
    http://www.apple.com/support/imovie/
    (Scroll down a bit)
    See the iMovie tutorials (in pdf form) at:
    http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
    http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
    http://manuals.info.apple.com/en/iMovieLesson1.pdf
    http://manuals.info.apple.com/en/iMovieLesson2.pdf
    http://manuals.info.apple.com/en/iMovieLesson3.pdf
    http://manuals.info.apple.com/en/iMovieLesson4.pdf
    http://manuals.info.apple.com/en/iMovieLesson5.pdf
    http://manuals.info.apple.com/en/iMovieLesson6.pdf
    http://manuals.info.apple.com/en/iMovieLesson7.pdf
    See the iDVD tutorial at:
    http://manuals.info.apple.com/en/iDVDAtAGlance.pdf
    http://manuals.info.apple.com/en/iDVD5GettingStarted.pdf
    http://manuals.info.apple.com/en/iDVDTutorial.pdf

  • Creating an interactive DVD from a Keynote presentation

    Does anyone know how to create an interactive DVD from a Keynote Presentation?
    I tried the export to Quicktime option, and then brought that QT movie into iDVD. The problem is that the interactive pauses between slides that I get with the QT version, isn't there in iDVD. The transitions turn into chapters, and when you play the DVD, one chapter goes right into another.
    I'm sure someone has dealt with this before.

    I should make something clear here...
    Be careful with terminiology. WIth Keynote 3 you can create a linear DVD, that works the same way a show in Keynote works if you plan to move through the show in the order you built it (complete with all the builds). What it does NOT appear to do is allow you to make a non linear DVD, which is, if you put a button/hyperlink on a slide, it won't work in the DVD. See my other thread about this for the reason why. I'm praying the next version of DVD Studio Pro will read iDVD projects, which would allow us to customize what Apple creates for us automatically.

  • Error when trying to create a web service from a wsdl file using jdeveloper

    Hello,
    I'm using the latest jdeveloper and jdk 6 update 20 on solaris sparc 10.
    When I'm trying to create a web service from a wsdl on the java EE 1.5 platform i get the following error:
    Validation failed:
    java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    I've tried the endorsed mechanism with the latest jaxws-api.jar and jaxb-api.jar packages with no help.
    It works fine when i use the java EE 1.4 platform....
    The full Error description:
    oracle.jdeveloper.webservices.model.WebServiceException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    +     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1635)+
    +     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)+
    +     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)+
    +     at oracle.jdeveloper.webservices.model.java.JavaWebService.setDescription(JavaWebService.java:745)+
    +     at oracle.jdevimpl.webservices.wizard.jaxrpc.topdown.TDJaxWsSpecifyWsdlPanel.setDescription(TDJaxWsSpecifyWsdlPanel.java:364)+
    +     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)+
    +     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$5.run(SpecifyWsdlPanel.java:661)+
    +     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)+
    +     at java.lang.Thread.run(Thread.java:619)+
    Caused by: oracle.jdeveloper.webservices.tools.WsdlValidationException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    +     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)+
    +     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:515)+
    +     at oracle.jdeveloper.webservices.tools.WebServiceTools.getSeiInfo(WebServiceTools.java:523)+
    +     at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1741)+
    +     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)+
    +     ... 8 more+
    Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: Error creating model from wsdl "file:/vobs/NMS/NorthBoundIF/MTOSI/MTOSI_Documentation/DDPs/ResourceTroubleManagement/IIS/wsdl/AlarmRetrieval/AlarmRetrievalHttp.wsdl": java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    +     at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:664)+
    +     at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createJAXWSModel(WsdlToJavaTool.java:475)+
    +     at oracle.j2ee.ws.tools.wsa.Util.getJaxWsSeiInfo(Util.java:1357)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
    +     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
    +     at java.lang.reflect.Method.invoke(Method.java:597)+
    +     at oracle.jdevimpl.webservices.tools.wsa.Assembler$2$1.invoke(Assembler.java:218)+
    +     at $Proxy34.getJaxWsSeiInfo(Unknown Source)+
    +     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:505)+
    +     ... 11 more+
    Caused by: java.lang.RuntimeException: java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    +     at com.sun.tools.xjc.generator.bean.field.AbstractField.getMRequired(AbstractField.java:186)+
    +     at com.sun.tools.xjc.generator.bean.field.AbstractField.annotateReference(AbstractField.java:209)+
    +     at com.sun.tools.xjc.generator.bean.field.AbstractField.annotate(AbstractField.java:164)+
    +     at com.sun.tools.xjc.generator.bean.field.AbstractFieldWithVar.createField(AbstractFieldWithVar.java:75)+
    +     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:89)+
    +     at com.sun.tools.xjc.generator.bean.field.SingleField.<init>(SingleField.java:76)+
    +     at sun.reflect.GeneratedConstructorAccessor53.newInstance(Unknown Source)+
    +     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
    +     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
    +     at com.sun.tools.xjc.generator.bean.field.GenericFieldRenderer.generate(GenericFieldRenderer.java:64)+
    +     at com.sun.tools.xjc.generator.bean.field.DefaultFieldRenderer.generate(DefaultFieldRenderer.java:75)+
    +     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateFieldDecl(BeanGenerator.java:751)+
    +     at com.sun.tools.xjc.generator.bean.BeanGenerator.generateClassBody(BeanGenerator.java:539)+
    +     at com.sun.tools.xjc.generator.bean.BeanGenerator.<init>(BeanGenerator.java:241)+
    +     at com.sun.tools.xjc.generator.bean.BeanGenerator.generate(BeanGenerator.java:181)+
    +     at com.sun.tools.xjc.model.Model.generateCode(Model.java:286)+
    +     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:251)+
    +     at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:85)+
    +     at oracle.j2ee.ws.common.tools.databinding.jaxb20.JAXB20TypeGenerator.generateJavaTypes(JAXB20TypeGenerator.java:117)+
    +     at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:186)+
    +     at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:647)+
    +     ... 20 more+
    Caused by: java.lang.NoSuchMethodException: com.sun.tools.xjc.generator.annotation.spec.XmlElementRefWriter.required(boolean)
    +     at java.lang.Class.getMethod(Class.java:1605)+
    +     at com.sun.tools.xjc.generator.bean.field.AbstractField.getMRequired(AbstractField.java:184)+
    +     ... 40 more+
    Thanks,
    Roy.

    Guys,
    You are asking about an issue that was a pain in the nick for me few months ago. The problem is that you won't find mych help here as I figured out that Apex geeks here either did not do much webservices or ended up hating it as i do :) . This is an error that can be due many different reason, let me ask you this:
    1- Does your the other system you are trying to call through webservices using HTTPS ?
    2- If yes, did you create a valid oracle wallet for that https connection ?
    3- Make sure you are using the correct URL ( am sure you do, just double check )
    4- If using a proxy, then you have to define that in the web service reference creation page
    provide more info and I hope I can help you with this,
    Sam
    Please reward good answers by marking them correct or helpful!

  • How do I create a DVD from an iMovie '08 Project?

    How do I create a DVD from an iMovie '08 Project? I followed the directions in the help section but when I open iDVD, my project is "grayed out" and I cannot open it in iDVD.
    Rich Rector

    In general, in imovie Share to Media Browser or Share to iTunes.
    Then open iDVD. Open the Media Browser in iDVD (at bottom right of window). Navigate to your movies and you should see the movie you made. Drag it in to the iDVD project.

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • Creating an installation DVD from CS4 download files

    Greetings! Has anyone managed to create a functional installation DVD(s) from the downloaded files of CS4 Design Premium. After extracting the files, which folders have to go on which DVD? I have both WIN and MAC and would like to install these from DVD.
    Thanks.
    Cheers!
    Brad

    Thanks for all the replies!! Gosh.<br /><br />Robert: Adobe support apparently told "cosmicone37" that "you can't create an installation DVD from the downloadable files. The only way to have a DVD installable version of any of the suites is to go through Adobe Support and get the DVDs through them."<br />As stated by me, this is simply not true. Read below.<br /><br />Mike: The images I see kicking around on torrent sites have been made from a trial download. That is certain. They say so explicitly.<br /><br />Try69: Thanks for the input. Yes, storing them on a DVD at least frees up the HDD space. But they are of no use unless copied back to the HDD each time one wishes to alter the installation etc. So I don't consider this a solution to the question Brad raised.<br /><br />Brad... et all...<br />Here is the answer. These instructions are for the master suite.<br /><br />1) In your DVD-DL burner software set up a new project. <br /><br />2) Call the disc ADBEMST4<br /><br />3) Using the free 7-Zip program (google for it) extract the contents of the ADBESTAMCS4_LS1.7z file you have downloaded.<br /><br />4) You need to edit the setup.xml file which is in the \Adobe CS4\Payloads folder<br /><br />Make it like this:<br /><br /><?xml version="1.0" encoding="UTF-8"?><Setup version="2.0.138.0"><br />     <Driver folder="AdobeMasterCollection4-mul-trial"/><br />     <Media><br />          <Volume><br />               <Name>ADBEMST4</Name><br />               <Payloads><br /><Payload folder="Acrobatcom-fr_FR"></Payload><br /> ... snip (see note) ....<br /><Payload folder="AdobeMasterCollection4-mul-trial"></Payload><br /></Payloads><br /></Volume><br /></Media><br /></Setup><br /><br />NOTE: I have removed all but one of the payload lines because there are too many to post here. But on every payload line you are changing from:<br /><Payload folder="Acrobatcom-fr_FR">Adobe CS4</Payload><br /><br />to<br /><br /><Payload folder="Acrobatcom-fr_FR"></Payload> <br />(as an example taken from the first payload line)<br /><br />Do that to every line. You are simply removing the "Adobe CS4" text.<br />Or download the edited xml from here: (only valid for 10 downloads as I am not a rapidshare user)<br /><br />http://rapidshare.com/files/160301059/Setup.xml.html<br /><br />5) Back to your DVD project. In the root of the disc you are creating, place all the files and folders in the \Adobe CS4 folder you ended up with after the extraction. Don't copy the \Adobe CS4 folder itself, just everything in it. So you'll end up with something looking like this: http://img293.imageshack.us/img293/8144/step5rh4.png   (image not from me, just one I found whilst researching this)<br /><br />If you want the extra files to be included (as found in STAMCS4_Cont_LS1.exe) then extract these with 7-Zip also. Copy the resulting files to your disc project. If you don't need the additional languages, then don't add them to the project. You may already be going over the limit for DVD-DL... so check on that.<br /><br />5) In your project put the new/edited setup.xml into the \Payloads folder. Remove the setup.xml already dragged into the project first, or overwrite it when you drag in the new one.<br /><br />6) Burn<br /><br />7) Install<br /><br />8) Enjoy<br /><br />If you have any questions let me know. If I've made typo's in the above and it doesn't make sense, let me know.<br /><br />All the best..<br />Jonathan

  • Exporting 23.98fps 720P project for PAL DVD

    I'm trying to create a PAL DVD from a HDV 23.98fps 720P project and am having a few issues. All the footage is PAL and I am converting it to an SD file as it is for an SD DVD however exporting through FCP gives me black frames, using DVD studio pro to convert gives me a freeze frame effect (both of which I assume is through converting 23.98 to 25 fps) so I was told to use Compressor. I tried this but can only seem to render out a 23.98fps file as NTSC, whenever I switch it to PAL it automatically changes to 25fps as my only option.
    Any help would be much appreciated as my deadline is looming.

    Hi:
    Are you sure that your footage is PAL 23.98 fps? I'm not involved with HDV but that sounds like NTSC frames.
    What is the source of that footage?
    Hope that helps !
      Alberto

  • I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    adam@honestmusky wrote:
    Yes I am using encore.  I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
    How about some DETAILS?
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Also describe the EXACT steps you take to go from Premiere Pro to Encore

  • Creating a PAL Widescreen DVD from NTSC footage.

    First off, my iDVD is version 7.0.4
    If someone could help me out with a very precise workflow it would be great, because I have a project with a one day turn around and the DVDs have to play properly the next day.
    This is the (sparse) information I got from the company that needs the DVDs : "As long as the DVD is UK pal widescreen it will play on the monitors."
    In the past, if shooting in NTSC and transferring to PAL, I've had the DVDs professionally transferred. With this project, I won't have time to do that.
    I'm planning on shooting on a DVX100 and editing in FCP. If shooting in NTSC is going to cause problems, I can definitely rent a PAL camera instead. (And would prefer to do that than have to do too much in post to get to a PAL Widescreen DVD)
    Can you let me know what sequence settings I should use (for both the NTSC possibility and the PAL possibility) in FCP, and then exactly how to set up the DVD in iDVD? I know this is a super basic question- thanks in advance for your help.
    Please note: I need the most reliable, quick workflow- would rather spend some money on renting a PAL camera if that's a more reliable method than transferring footage.

    Thanks for the response! I just learned about an additional problem, unfortunately...
    The client has OTHER footage that was already shot in NTSC that they need edited into the project. So I pretty much have to shoot in NTSC. However, there is the additional option of uploading the final clip to a server instead of burnind DVDs... any advice? Can I use MPEG Streamclip to create Pal files (let's say quality doesn't have to matter as much...)

  • How do I achieve a high quality PAL SD DVD from Final Cut Pro?

    From a PMW-EX1 camera file edited in Final Cut Pro I am unable to produce a high quality PAL SD DVD using compressor and DVD Studio Pro (tried multiple combinations).
    Using Final cut pro and Magic iDVD I can achieve a high quality SD DVD with no changes in export.But am limited to the iDVD restrictions.
    From discussions it appears using compressor and DVD Studio pro it is not achievable, it is very frustrating that the Apple product you have to buy is not as efficient as the free one?
    If not possible then how do I access the encoded file from IDVD?
    My Final cut pro sequence settings:
    General - Aspect ratio: HDTV 1080i (16:9) 1920x1080, square and upper(Odd)
    Quicktime video settings compressor: xdcam ex 1080i50 (35 mb/s vbr)
    I

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

  • NTSC & PAL Widescreen DVD from Flash Animation

    Hey Everyone. I have a question regarding a project I am finishing up. I created an animation in flash that is being exported to both NTSC Widescreen DVD and PAL Widescreen DVD.
    I started with 1024x576 in flash and created a sweet animation with audio. (Its a 1 min animation that will be looped for conventions etc)
    For NTSC
    From Flash I exported a 853x480 animation and imported it into FCP to add some fades to the beginning and end and make a few tweaks. I exported out another 853x480 video and imported it into DVDSP set to NTSC Widescreen. I burned the disc and everything looks great on my screen (letterbox on my crappy home tv)
    For my PAL version I followed a similar process.
    From Flash I exported a 1024x576 animation and imported it into FCP to add some fades to the beginning and end and make a few tweaks. I exported out another 1024x576 video and imported it into DVDSP set to PAL Widescreen.
    The thing I noticed is that the video in the viewer seems stretched where as the NTSC looked perfect.
    Am I missing something here? Where did I go wrong. Should i have set the video size smaller in FCP and outputted the proper video size (NTSC 720 x 480 and PAL 720 x 576) to bring into DVDSP? I don't know why one would look ok and the other would look stretched.
    Any help would be appreciated. Thanks
    Fish

    Fish:
    Try this in FCP:
    PAL VIDEO
    - Select Easy Setup DV PAL
    - Create a new sequence and open it
    - Go to menu Sequence > Settings...
    - Change Quicktime Video Settings Compressor from DV-PAL to uncompressed 8 bit
    - Check the anamorphic option
    - Import your movie and make it fit the canvas (check the Distort option in the Motion tab)
    - Do your edit
    - Export your timeline as Animation.
    Same for the NTSC but using DV NTSC Easy Setup and so . . .
    If I don't missed something your movies must be fine in DVDSP.
    Hope it helps!
      Alberto

  • Easy way to create a new dvd from an authored dvd so slideshow can be added

    Can a DVD be copied and an almost duplicate DVD be created from it with an iDVD slideshow added?
    I would like to know if I can make a composite DVD from my wedding video DVD and the wedding slideshow DVD I created with iDVD that keeps all their respective assets intact. Consequently, is it possible to copy both dvds and make a new dvd with just a higher level main menu added that allows you to view both dvds' contents just like the originals?
    Cheers.
    15" Powerbook   Mac OS X (10.3.9)   1.25GHz - 2GB

    Probably not, but try the iDVD discussion board.
    http://discussions.apple.com/category.jspa?categoryID=128

  • Burning PAL dvd from NTSC FCP 6 project?

    I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
    Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

    If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

  • Creating auto play DVD from Captivate output

    Hello: I have been asked to create a auto run DVD of a
    Captivate tutorial I created. Is it possible to create a DVD or
    only a CD? Any thoughts would be appreciated. New to the forum.
    :)

    Hi bmac99 and welcome to our community
    I think that in order to do this, you will need to first
    convert your Captivate content to a video format. (.WMV, .FOB, .MPG
    and others) You could do this by importing the Captivate project in
    Flash and creating the video output from there. Or you might use
    something like SoThink SWF to Video Converter
    Click
    here
    Hopefully this helps... Rick

Maybe you are looking for

  • How to convert/download videos embedded with cold fusion?

    Does anyone know of a free video conversion software that will convert and download online videos embedded with cold fusion ("cfmid=?") format/extension?  I tried a few online sites and they do not support that format yet.   Please help.  Thank you s

  • Staying Up-to-date

    Howdy! I have managed to get behind several versions of OCS and was wondering if there was somewhere on the Oracle web site where I could have them send me email alerts when a new product version or patch was released. I've looked through Metalink an

  • MBA not connecting to network drives after waking from sleep

    I have been having this problem over the past few days. When my lat 2010 MBA wakes from sleep it will not connect to my NAS. If I try to force it too connect finder will crash and I get the cannot find finder.app error -10801. The only way I have bee

  • Any BAPI for PAYR table updation

    Hi All, Is there any BAPI available for payment medium file table (PAYR) update? Thanks, Anil.

  • Created partition with bootcamp, Win 7 says cannot install on any partition

    It asks me to choose which partition to load windows on, but on each one, including bootcamp, it's says it cannot install on that partition.  Have deleted partition, started again only for the same thing to happen..........Help