Trying to create this effect...

Does anyone know if this effect could be created in Motion? Or a combination of Motion and something else perhaps?
http://www.youtube.com/watch?v=8ERe-alcoaM

Swift3D..... You will be amazed... Been using it for 4 years and is my little secret. I crank out logos like this in minutes with the help if Illustrator.
http://www.erain.com/
nava

Similar Messages

  • Cool effect..how can i create this effect on Motion 3?

    that's great.
    Someone please tell me how can i create this effect on motion 3?
    http://www.ayatoweb.com/aetips_e/ae17_mov05e.html
    thanks

    Use the bezier tool to create your shapes, give the shapes an Airbrush outline. Then apply a Write On behavior to each shape. Position the shapes in the timeline so they appear sequentially. To achieve the zooming out effect, you can either scale the whole group, or convert the group to 3D and use the camera to zoom out.

  • Can anyone explain how to create this effect in Deamweaver and Fireworks?

    This site was oriinally done in dreamweaver - but the shadow
    effect was done
    outside of Dreamweaver. When I save to html and load into
    Dreamweaver it
    makes no sense to me.
    Can anyone explain how to create this effect in Deamweaver
    and Fireworks?
    http://www.fundflowsystems.com/test.php
    Thanks in advance,
    Joe

    Thank you so much...
    You is da bomb!
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    > Yes - a blank (completely blank) page.
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    > ==================
    >
    >
    > "Ken Binney" <[email protected]>
    wrote in message
    > news:[email protected]...
    >> Murray, one more favor if you would be so kind...
    >> Do you recall how this page degraded in Safari?
    >>
    >>
    http://www.binney.us/table-allcode.htm
    >>
    >>
    >> "Murray *ACE*"
    <[email protected]> wrote in message
    >> news:[email protected]...
    >>> Nope. Sorry. You need a Mac.
    >>>
    >>> --
    >>> Murray --- ICQ 71997575
    >>> Adobe Community Expert
    >>> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >>> ==================
    >>>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >>> ==================
    >>>
    >>>
    >>> "Ken Binney"
    <[email protected]> wrote in message
    >>> news:[email protected]...
    >>>> Thanks Murray...
    >>>>
    >>>> Is there a way I can test for Safari on my
    PC XP ?
    >>>>
    >>>> "Murray *ACE*"
    <[email protected]> wrote in message
    >>>> news:[email protected]...
    >>>>> Fails in Safari, Ken.
    >>>>>
    >>>>> --
    >>>>> Murray --- ICQ 71997575
    >>>>> Adobe Community Expert
    >>>>> (If you *MUST* email me, don't LAUGH
    when you do so!)
    >>>>> ==================
    >>>>>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>>>>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>>>>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>>>>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >>>>> ==================
    >>>>>
    >>>>>
    >>>>> "Ken Binney"
    <[email protected]> wrote in message
    >>>>>
    news:[email protected]...
    >>>>>> Here is a solution requiring NO
    images.
    >>>>>> The CSS and the Javascript can
    easily made remote the page
    >>>>>>
    >>>>>> <!DOCTYPE HTML PUBLIC
    "-//W3C//DTD HTML 4.01 Transitional//EN"
    >>>>>> "
    http://www.w3.org/TR/html4/loose.dtd">
    >>>>>> <html>
    >>>>>> <head>
    >>>>>> <title>Shadow</title>
    >>>>>> <meta http-equiv="Content-Type"
    content="text/html;
    >>>>>> charset=iso-8859-1">
    >>>>>> <script
    type="text/javascript">
    >>>>>> var depth = 6 // in pixels
    >>>>>>
    >>>>>> // addLoadEvent t
    >>>>>> function addLoadEvent(func) {
    >>>>>> var oldonload = window.onload;
    >>>>>> if (typeof window.onload !=
    'function') {
    >>>>>> window.onload = func;
    >>>>>> } else {
    >>>>>> window.onload = function() {
    >>>>>> if (oldonload) {
    >>>>>> oldonload();
    >>>>>> }
    >>>>>> func();
    >>>>>> }
    >>>>>> }
    >>>>>> }
    >>>>>>
    >>>>>> addLoadEvent(function() {
    >>>>>>
    >>>>>> var a = document.all ? document.all
    >>>>>> document.getElementsByTagName('*');
    >>>>>> for (var i = 0;i < a.length;i++)
    >>>>>> if (a
    .className == "shadow") {
    >>>>>> for (x = 0;x < depth;x++) {
    >>>>>> var newSd =
    document.createElement("DIV")
    >>>>>> newSd.className = "shadow2"
    >>>>>> newSd.style.background = a.id
    >>>>>> newSd.style.width = a
    .offsetWidth + "px"
    >>>>>> newSd.style.height =
    a.offsetHeight + "px"
    >>>>>> newSd.style.left = a
    .offsetLeft + x + "px"
    >>>>>> newSd.style.top = a.offsetTop +
    x + "px"
    >>>>>> document.body.appendChild(newSd)
    >>>>>> }
    >>>>>> }
    >>>>>> }
    >>>>>> }
    >>>>>> );
    >>>>>>
    >>>>>> </script>
    >>>>>> <style>
    >>>>>> .shadow {
    >>>>>> border: 1px solid silver;
    >>>>>> padding: 2px;
    >>>>>> font: 10pt arial;
    >>>>>> position: relative;
    >>>>>> display: inline;
    >>>>>> background: white;
    >>>>>> z-index: 100
    >>>>>> }
    >>>>>> .shadow2 {
    >>>>>> overflow: hidden;
    >>>>>> position: absolute;
    >>>>>> filter: alpha(Opacity=15); /* modify
    to change the shade
    >>>>>> solidity/opacity, same as below */
    >>>>>> opacity: 0.1; /* firefox 1.5 opacity
    >>>>>> -moz-opacity: 0.2; /* mozilla
    opacity */
    >>>>>> -khtml-opacity: 0.1; /* opacity */
    >>>>>> z-index: 10
    >>>>>> }
    >>>>>> </style>
    >>>>>>
    >>>>>> </head>
    >>>>>>
    >>>>>> <body>
    >>>>>> <table width="800" border="0"
    align="center" cellpadding="0"
    >>>>>> cellspacing="0" class="shadow"
    id="#000000">
    >>>>>> <tr>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> </tr>
    >>>>>> <tr>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> </tr>
    >>>>>> <tr>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> </tr>
    >>>>>> <tr>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> </tr>
    >>>>>> <tr>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> <td> </td>
    >>>>>> </tr>
    >>>>>> </table>
    >>>>>> </body>
    >>>>>> </html>
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>> "Joe"
    <[email protected]> wrote in message
    >>>>>>
    news:[email protected]...
    >>>>>>>
    >>>>>>> This site was oriinally done in
    dreamweaver - but the shadow effect
    >>>>>>> was done outside of Dreamweaver.
    When I save to html and load into
    >>>>>>> Dreamweaver it makes no sense to
    me.
    >>>>>>>
    >>>>>>> Can anyone explain how to create
    this effect in Deamweaver and
    >>>>>>> Fireworks?
    >>>>>>>
    >>>>>>>
    http://www.fundflowsystems.com/test.php
    >>>>>>>
    >>>>>>> Thanks in advance,
    >>>>>>>
    >>>>>>> Joe
    >>>>>>>
    >>>>>>
    >>>>>>
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>
    >>>
    >>
    >>
    >
    >

  • Im trying to create this program but I'm a little stuck

    Hey guys I'm trying to create this program but I'm a little bit stuck. Thanks for the help. Im trying to create a program that prompts the user for a string, then it takes the string adds 2 to the unicode value, and returns that as the output so for example:
    hello there
    turns into
    jgnnq vjgtg
    Thanks for your help

    Hey guys I'm trying to create this program but I'm a
    little bit stuck. Thanks for the help. Im trying to
    create a program that prompts the user for a string,
    then it takes the string adds 2 to the unicode value,
    and returns that as the output so for example:
    hello there
    turns into
    jgnnq vjgtg
    Thanks for your helpYou didn't add 2 to the space character, so is that to be treated special?
    Anyway, you have a String. That String has a length() to tell you how long of a loop you have to do. That String also has a charAt(index) method to give you a character while you're looping thru it. And I assume you know how to add 2 to a character value, and append that character to a new String or StringBuilder or StringBuffer until you're done with the loop.

  • Trying to duplicate this effect

    Of course the guy that did it won't share his way of doing it, says there is a plug-in but it's $250. I'm wondering if anyone here knows how this effect can be made or knowing of the plug-in (Exposure 2) can be gotten for free. Here's the image that I'm trying to get, it's the effect on the player.
    [IMG]http://i573.photobucket.com/albums/ss173/djcarsey83/34g4rjn.jpg[/IMG]

    You can try contrast masking and high pass sharpening to create something like this effect. You might try smoothing the image using smart or surface blur after applying some of the contrast masking.
    http://www.graphics.com/modules.php?name=Sections&op=viewarticle&artid=733
    http://www.luminous-landscape.com/tutorials/contrast_masking.shtml

  • How would you create this effect?

    I am curious if there is a fairly straight-foward away of creating the effect seen in this image. I am talking about the pixelated effect made up of many little red boxes of various hues at the top part of the image.
    I was thinking of zooming in real close to an image in photoshop and doing a screen capture, but I'd rather have a vector image that can be easily scaled in size and easy to change the hue to different colors.
    Something like this able to be done in illustrator without building it a box at a time?
    Regards,

    Well I'd say that PDF is a vector.
    The PDF contains nothing other than a raster image. It contains no vector paths.
    (By the way: "A vector" is a single expression of a direction. Calling a vector-based illustration "a vector" is like calling a raster-based image "a pixel.")
    I zoomed in as close as I could and didn't see any pixels.
    All you could see is pixels. That's all that's there.
    If it's raster I'd be interested in knowing what resolution...
    Its resolution is 1. It's a single-pixel raster image (as given away in its title).
    I've never experienced a raster image that didn't get more pixelated the larger you scaled it up.
    Yes, you have. That's exactly what I demonstrated in post 5 and in the PDF.
    The operative word in your comment is more pixelated. That misconception is the point of the demonstration. Your image is already pixelated, and that's exactly what you want. It won't be "more" pixelated whatsoever, no matter how large you scale it.
    At the heart of the [quite common] misconception is this: What you are calling "resolution" is not. True resolution is the measure of the amount of information contained. A raster image contains only a fixed amount of information. PPI is merely a scale factor. It's merely an expression of information density, not quantity. As you can see, that PDF is every bit as "resolution independent" (i.e.; scaleable) as a vector square.
    The same priciple applies to your raster image. Your whole intent in your posted example is to display pixelation. So if the very thing you're trying to depict is the pixelation of, say, a 10 pixel x 20 pixel raster image, then all you need in order to depict that at any scale is a 10 pixel by 20 pixel raster image. At a scale of 10 PPI, you've got a perfect depiction of 10 square Pixels Per Inch. At a scale of 200%, you've got a perfect depiction of 5 square Pixels Per Inch (i.e.; 10 Pixels Per 2 Inches). You can scale it to the size of the moon and you'll have a perfect depiction of 10 Pixels Per Moon. It's just as scaleable as a 10 x 20 array of vector squares.
    In other words: All the actual resolution of your raster image (all its information—all its pixels, in all their squareness) is already visible. Reducing its information density (by scaling it larger) will not reveal more of its actual information (the square shape of its pixels—the information that one usually wants to conceal or disguize about raster images, but not in this case).
    The whole purpose of making sure your raster images have "sufficient resolution" in desktop publishing is to disguise the squareness of their pixels (what is commonly called "pixelation"). But that is exactly what you are intending to depict in this case. And you want to be able to depict that with equal clarity at any scale. There's no need to re-draw it as vector paths in order to do that. In this situation, you are not trying to avoid "pixelation," you are trying to show it, which is exactly what a raster image does by its nature.
    Think of it this way: If all you are trying to draw is 200 squares, it can easily be argued that a raster image is more "data efficient" than a file containing 200 square vector paths. For each vector path, you have to include four coordinate pairs (800 anchor points). For a raster image, all you need is 200 color values.
    This is not just a symantic or academic or pompous know-it-all point of argument. It's a point widely applicable to many common situations, and something every graphics professional should understand. For example, consider the software instructions author who pointlessly frets over the misunderstood "requirement" for pixel density when his illustrations necessarily consist of screenshots that are, after all, supposed to accurately and clearly depict what the user sees on his screen. Or the fact that you see single-pixel raster images scaled to the full width of the page, or dimensions of a table cell or large section of a whole background on web pages everyday. Or the widespread misconception that intentionally fuzzy raster effects like soft drop shapows "require" 300 PPI.
    JET

  • How do I create this effect?

    Hi, I have been searching on tutorials to produce the attached effect, but the problem is, I don't know how to describe it and have very little experience printing on fabric. I'll be submitting a vector image to a production company for printing on silk, and would like to create an effect similar to the soft-edged coloration in the ice tea and umbrellas. I tried feathering but there dosen't seem to be an option to feather one side of things. Any advice would be greatly appreciated.  Thanks in advance - Julia
    Bonus question:  Does the linetype look basic, with the fabric altering the edges or does it look like a custom line type?

    What you show looks like a simple pattern of 3 pictures.
    I’m pretty sure that the fuzzines is either due to poor printing or poor photography or both.

  • HOW CAN I CREATE THIS EFFECT????

    Does anyone know how create this awesome effect??
    http://www.redpearlkitchen.com/losangeles/index.html
    email me please
    [email protected]

    you can just have everything in an entire H box or V box with
    a "move left" and "move right" function, that moves the X
    coordinates once the button is clicked.. should be as easy as that.
    to make it smooth like that you'd need a few extra components but
    shouldn't be that hard.

  • How create this effect...please help newbie

    I saw this effect on the website template at templatemonster
    and was wondering if someone knows how to create this or has a
    tutorial how to do it
    you go here to preview
    templatemonster.com/website-templates/10795.html
    I like the way the blocks transition from one pic to another
    any help would be greatly appreciated
    thanks

    Wolf van Ween wrote:
    > You have two pictures on top of each other, then you
    mask off the top one with quadratic blocks, making that area of the
    underlying picture visible.
    Just as Wold says...
    You would be surprised how primitive are the methods behind
    some really spectacular effects.
    Just a bit of imagination and patiences, such masking
    consists of lots of layers and tweens,
    for many simply discouraging... tho once you do few, it
    become quite easy.
    Based on Wolf's explanation, made quick mock up of the
    masking for you:
    http://flashfugitive.com/stuff/slide_05a.swf
    d/l
    http://flashfugitive.com/stuff/slide_05a.zip
    Regards
    Urami
    Happy New Year guys - all the best there is in the 2006 :)
    <urami>
    http://www.Flashfugitive.com
    </urami>
    <web junk free>
    http://www.firefox.com
    </web junk free>

  • I need to create this effect in PS CS3

    It is not a drop shadow as I tried that . All I know is how to use the rectangular marquee to get the rounded corners. What is the correct term for this effect.
    effect around ring is here
    http://dagwaremedia.com/pshopeffect.jpg

    It's most definitely a drop shadow and stroke. Play with the blending mode settings, angle of light, offset, etc.
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1V0jRoSFzj5Ij642vB7E8RBR1Jw11a" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1V0jRoSFzj5Ij642vB7E8RBR1Jw11a_thumb.gif" border="0" />

  • Trying to create this Text Transition...

    Hi guys, can anyone help, I'm trying to create a text transition like the one below in FCP...
    http://www.alex.mastersofcreation.com/alexw/spacetesttransition/spacetesttransit ion.html
    Just something similar, does anyone know of any useful plugins or tips?
    Thanks

    Create your text layer with the title and blow it up to be the size of the screen and keyframe it so it moves right>left. Place the second layer of video (the one you're transitioning into) below the text layer, and set the text layer's composite "Travel Matte".
    Nest (or export with an alpha channel and bring back in) this sequence above your first layer of video.

  • Need Suggestions to Create this Effect

    Using Premiere Elements 12 on Mac, I want to create the effect of a wallpaper showing ballet dancer images, then having them appear to "dance" where they first appear. I have not been able to figure out how to insert active gifs to do this. Would welcome suggestions. Thanks!

    SpockNard
    This is the short version for now.
    Have you given any thought to capturing freeze frames from your video and going from still to video when you want the dancers to animate?
    Not sure if this is the type of thing that you are after but please check out my PE: Perspective Effects blog post
    http://www.atr935.blogspot.com/2013/08/pe-perspective-effects_4.html
    especially the second example demo'ing Bird Flying Out In Picture Frame.
    More later.
    ATR

  • HT1578 My Macbook Pro has been trying to create this for 4 hours now, and is only 25% done.. ideas?

    I'm trying to create a small password-protected image, and followed the instructions in this article; however, it has been stuck at "creating image" for about 4 hours now and is only 25% done. Ideas?

    Hi, tough to tell, but...
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • How did they create this effect?

    Hi everyone!
    I'm trying to duplicate the effect on layer 2 so I can apply it to different text layers. (please see attached file below) Instead of "You", I want to write "Get". When I change the text to "Get" I want to make sure layer 2 changes to "Get" as well. I'm lost because I don't know how to do it.
    Thanks very much for your time and any ideas and suggestions.
    -TD

    When one wants two layers to show the same content Smart Objects are the tool of choice.
    In attached file I created a SO of the text-layer, duplicated it and applied a different Layerstyle to that.
    To change the text one can open the SO (by double-clicking its symbol in the Layers Panel), make the changes and save it.

  • Where can I find information to create this effect in AE and Ps

    http://www.worshiphousekids.com/countdowns/13013/Kids-Ocean-Countdown
    I want to build videos using this technique of paper cut-outs held by string and moving on a stage.  Will you please point me to information or tutorial for this please.  Thank you.  Mark

    You can create this style by simply creating a layered photoshop file with each element on a separate layer. The photoshop file should be slightly larger than your composition to allow movement of the layers without scaling.
    The flapping wings on the birds are easily accomplished by creating plan view's of the wings then moving the anchor point to the root or body end of the wings, making all of the bird parts 3D layers, then positioning and animating the rotation of the wings to make them flap. I'd do this in a pre-comp, then animate the position of the pre-comp.
    There are some basics in the help files. Search for animating position and animating rotation. There are also a bunch of AE tutorials here. Check out the video tutorials / getting started section. There's a great one on Adobe TV on animation basics.
    There aren't any advanced techniques that you'll need to use to duplicate this effect.

Maybe you are looking for