Trying to create this Text Transition...

Hi guys, can anyone help, I'm trying to create a text transition like the one below in FCP...
http://www.alex.mastersofcreation.com/alexw/spacetesttransition/spacetesttransit ion.html
Just something similar, does anyone know of any useful plugins or tips?
Thanks

Create your text layer with the title and blow it up to be the size of the screen and keyframe it so it moves right>left. Place the second layer of video (the one you're transitioning into) below the text layer, and set the text layer's composite "Travel Matte".
Nest (or export with an alpha channel and bring back in) this sequence above your first layer of video.

Similar Messages

Trying to create a text that is on fire or more like a hot branding iron

Trying to create a text that is on fire or more like a hot branding iron

Something like this?
That was from a project I did a few months ago. Sounds similar to what you want. I did that in After Effects.
Basically all I did was add a glow effect to the text and messed around with the glow parameters. The black smoke is animated and moves on the actual video and is basically some pre keyed smoke footage that I had. The smoke was originally gray but black looked cooler.
I'd say it's pretty close to your hot branding iron thing.

Trying to create a text item with a scroll bar in Indesign 5.5

Is there a simple way to create a scrollable text article in Indesign 5.5? It will later be exported to a SWF as a mini-flash web portfolio.
I would appreciate any help.
I'm new to Indesign.

quote:
Originally posted by:
wildfire121
Can someone please help. I am trying to create a text box
with a working scroll bar that will scroll the text in the text
box. Can someone please help me with this?
Do you mean a text box people can type in (for a Web form
entry) or one for displaying your content?
If the first, then you use the textarea tag and scrollbars
appear when the user types more lines that you specify. See the
textarea
description at W3Schools.
If the second, then that's usually done in Flash, but can be
done with CSS. See these two pages:
Dynamic
text with scrollbar (Flash)
Textbox
with scrollbar (CSS)

Whfree can i find my channels in elements 11..i am trying to create a text effect

I am trying to create a text effect that requires me to make all channel active. Normally in photoshop i can find the tab near my layers but they are not there.

There is no channels palette in Elements.
You can select channels in the levels command. There is generally a way to do what you want in Elements; can you give more details about what you want to achieve?

Im trying to create this program but I'm a little stuck

Hey guys I'm trying to create this program but I'm a little bit stuck. Thanks for the help. Im trying to create a program that prompts the user for a string, then it takes the string adds 2 to the unicode value, and returns that as the output so for example:
hello there
turns into
jgnnq vjgtg
Thanks for your help

Hey guys I'm trying to create this program but I'm a
little bit stuck. Thanks for the help. Im trying to
create a program that prompts the user for a string,
then it takes the string adds 2 to the unicode value,
and returns that as the output so for example:
hello there
turns into
jgnnq vjgtg
Thanks for your helpYou didn't add 2 to the space character, so is that to be treated special?
Anyway, you have a String. That String has a length() to tell you how long of a loop you have to do. That String also has a charAt(index) method to give you a character while you're looping thru it. And I assume you know how to add 2 to a character value, and append that character to a new String or StringBuilder or StringBuffer until you're done with the loop.

Problems trying to create scrollable text in InDesign CC

I'm making an interactive presentation in InDesign. Im trying to create some scrollable text. i didn't know how to do that in CC, so I looked up some videos over the web and learned I needed to use the "Folio Builder" or the "Overlay panel". i never was able to find the latter and the Folio Builder gives me this message: "A software update is required to use Digital Publishing Suite. Please go to the Help menu and select Updates to get the required software." My software is already up-to-date (at least that's what the Adobe Application Manager tells me). Is this happening because I'm using a trial version? I'm planning to buy the Creative Cloud package but first I need to know it's worthy. Thanks for your help!

You are most likely looking at some very old videos. As it happens my DPS
course was just released on lynda.com:
http://boblevine.us/my-first-lynda-com-title-adobe-digital-publishing-suite-
essential-training-is-live/
There's a link to a one week trial there if you don't have a subscription.

Pan & Zoom option in Overlay Creator disabled/grayed out when trying to create scrolling text

Hi all,
I'm trying to create a scrolling text frame using the Paste Into method. I've created a long text frame, cut it, pasted into another frame. When I go to the Overlay Creator and click Pan & Zoom, it tells me to select a cropped image. I've tried an identical work flow on another computer and it works fine - the pan only radio button is available.
I've reinstalled the CS5 extensions, restarted my Mac and I can't resolve the issue. I only downloaded the extension tools last week, so I'd hope they aren't too out of date now. The About screen tells me I'm on 11.4.2.20111116_m_671500 7.0.3.13
Any help appreciated.
Adam

The best place to get the new builds is the DPS Dashboard (https://digitalpublishing.acrobat.com). You can also view the detailed help topic about installing:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html
If you install the Folio Producer tools and then the Folio Builder panel, you should be able to sign in just fine. Let us know if you still get the error.

HT1578 My Macbook Pro has been trying to create this for 4 hours now, and is only 25% done.. ideas?

I'm trying to create a small password-protected image, and followed the instructions in this article; however, it has been stuck at "creating image" for about 4 hours now and is only 25% done. Ideas?

Hi, tough to tell, but...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

How do I create this text effect in motion?

Hi,
I am a bit of a motion newbie - and am stuck as to how to replicate this sratchy/jumpy/glow text effect found in the video preview here . . . .
http://www.worshiphousemedia.com/index.cfm?hndl=details&tab=MM&id=4609
(click the video in top left)
If anyone can offer some help it would be greatly appreciated.
Warmest Regards,
Adam

mark, patrick, pierre and Longstrider - thankyou - sucess!
Longstrider- special thanks for your fab run through I knew it couldn't be too tricky... hehe - it really isnt!
I have got it shaking and mimicked exactly as in the sample vid clip - now i just have to add the randomisation on opacity, and perhaps some graininess to the text (text edging&fill is a bit sharp and clean).
Once again - thankyou so much!
Warmest Regards,
Adam

The title I'm trying to create using text tool is cutting off right side

I've looked at all the settings and can find no reason for this.
While I'm still a bit of a novice, I have done titles before and never had this problem.
An additional green box shows up in my canvas, showing me exactly where this it cutting off. I don't know what this is. Is there a way to readjust this?
Under the Motion tab in my Viewer, the Center is set to -55 and -100, because this is where I want the text positioned. It is also aligned left under the Control tab. I can see where, if I were to align center, it would all fit, but then the text isn't appearing where I want it to.
Can anyone help?
Thanks a lot.
J.

Well, now I'm feeling even more stupid.
I cannot find the generator button you describe, even after consulting the help manual.
I THINK I know which one it is - the button in the lower right corner of the viewer - the same one that has Text, Crawl, etc....?
But it's not there.
I'm using FCP HD. is that the problem?
Also, Boris is familiar to me - I think I've used it or seen it in the past - but I can't find it. I'm wondering if I'd seen it previously while using Final Cut Express, but somehow, since upgrading to Pro, I don't see it any more.
If you can clarify any of this, i would be vrey grateful.

Been trying to create this..........

Hi again,
Also been trying to recreate something similar to the image below but frustratingly can't seem to get the angle or make it look anything half decent.
Really like the angle and transparency and while I can get half way there, still can't make it look half decent.
Any thoughts? P

Hi, tough to tell, but...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Trying to create this effect...

Does anyone know if this effect could be created in Motion? Or a combination of Motion and something else perhaps?
http://www.youtube.com/watch?v=8ERe-alcoaM

Swift3D..... You will be amazed... Been using it for 4 years and is my little secret. I crank out logos like this in minutes with the help if Illustrator.
http://www.erain.com/
nava

Trying to create this particle

Over at videocopilot.net there is a tutorial for "soul removal"
http://www.videocopilot.net/tutorial/soul_removal/
that uses a few different filters on a particle to create a very organic-looking energy flow.
Does anyone know what particle and/or filters to use in Motion to create a similar effect?

I have looked over the tutorial again, and tried to do the equivalent of everything in Motion.
Specifically, the part I hit a wall on is one of the blurs. After Effects has something called "vector blur", but I can't find anything in Motion that provides a similar effect.
Does anyone have any advice?

I am trying to create a button in flash that will display 4 separate images at the same time when clicked. I can't get the images to stay on when I take the mouse of the button. I need the actions script code to make this happen.

I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time. I can get the images to appear when I click the button but they will not stay on the screen. I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code. It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
Thank you in advance
AP

It is not clear how you are trying to realize this from your description. If you are trying to create this within a button symbol it will not work. Explain your approach and if there is code involved, show what you have so far.

How to create a text tag that shows up in a file but not on the sceen.

I need some help, I'm a newbie with enough skill to be dangerous. If someone can point me in the right direction has to how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible
in a text editor but not the text file. That would be great. If you wish to show some code examples that's OK, but if not I can stumble through and learn while doing it from your directions on how to get it done.
I will start with an example of what I'm trying to do; using the old desktop pub program Ventura. They had (what I'm calling a tag) tags in from of ASCII text in a file to tell the program what it was and what to do with it, I. E.; "Title@this
is the title text" the next line could be "Body@this is body text". When loaded the "Title@" would not be there on the screen.
I'm trying to create some text that uses a similar concept but not for formatting of text like Ventura.
I want to be able to highlight some text in an editor and then have it place some sort of tag for the highlighted text so that I could use it to do something upon that text and only that text; in concept the text "Bob Brush was a painter." I would
highlight Bob Brush and somehow assign a tag that would be "name" and then highlight "painter" and be tagged with "job".
The text file would then have something in it to distinguish "Bob Brush" and "painter" as what each is name and job. (as a note I'm not trying to make a database or form just using this simplified concept to get my idea across
because I get to wordy).
Thanks in advance BK
blk

Hi bik,
>> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file.
It is unclear to me. Like you mentioned F keys, how does it work for? And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
In addition, I found a related thread
Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trying to create this Text Transition...

Similar Messages

Maybe you are looking for