Trying to create

I have created a Menu with 5 buttons. The first button says PLAY ALL
which means all the chapters on this certain track will play. My client
also wanted to have each individual chapter as a button, so he could play
just a single chapter and have the DVD go back to the menu with that chapter
highlighted, after that chapter was finished playing. I created this in the connections tab under tracks.
For end jump of each chapter I put the menu button of that chapter.
Now when I play a certain chapter using the menu button it plays the selected chapter and then it goes back to the menu, which is what I want.
My problem is when I press PLAY ALL it won't play the whole track,
it stops after the first chapter and goes back to the menu.
By setting an end jump at the end of every chapter, did I override the PLAY ALL button from playing the whole track?
I tried creating another track with no chapters of the same media but this would make the DVD to large.
How can I do this with one track? Meaning I want one button to play the whole track, and the other buttons
just to play a certain chapter and then go back to the menu after it is finished playing the chapter.
Thanks
Patch
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM

Thanks both of you for your input, I tried your method Colin
by creating a story for each track and it works great.
You guys are lifesavers.
Patch
Dual 2 Ghz Power PC G5 Mac OS X (10.4.6) 4.5 GB DDR2 SDRAM

Similar Messages

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

My family uses a single lap-top as our main internet connection and when we synch our respective I-pods, our I-tunes account seems to wipe-out our playlists, even though we have tried to create separate I-tune accounts. Help!!

My family uses a single lap-top as our home computer and several of us have i-pods that we like to synch, using I-tunes. Although we've tried to create separate I-tune accounts, our i-tunes playlists are getting wiped out when one of us deletes songs on our I-pod and it seems as though I-tunes is not distinguishing our distinct accounts and all i-pods are being synched to reflect the latest i-pod anyone makes on their respective account. It appears as though our distinct I-tune accounts are not being loaded on our lap-top when we sign in and unfortunately, when we're in I-tunes, there is nothing to indicate what account is on the screen. For all the glowing appraisals apple-related products usually receive, we are finding i-tunes and its interface with our respective i-pods to be a very, very frustrating experience.
Can anyone shed some light on this for a family of non-techies? Thx
Pegger64

You need to create separate Windows user accounts if you want to seperate the behaviour of iTunes for each user. That also means separate iTunes libraries for each user.
Windows is a multi-user operating system but you are not using it properly. iTunes is not a multi-user application. No application is. You can't expect it to treat different users differently when they are all using the same computer user account.
Do you understand what I mean?

Trying to create a Mozilla Persona account, but I'm not receiving the confirm credentials e-mail after three tries. Help?

I'm trying to create a persona account for: (Email removed by mod) but when I try to sign up after I've entered my e-mail and new password, I do not receive my confirmation e-mail (after repeated attempts).

The original url you gave me was: http://www.mozilla.org/en-US/persona/ which is in the first screenshot I provided. If I am in the totally wrong place, it is because that is where I was recommended to go.
I cannot login with my email and password, for as I stated in the beginning, I'm not receiving the confirmation email message that validates my email address in order to create a Persona account.

Trying to create a shell script to cut/paste files in finder. Help needed.

I'm trying to create an automator shell script to cut/paste. It'll function exactly like copy/paste. i.e. I'll just copy file/files with command+c like always, but then I'll create an automator which uses the "mv" terminal app to move the files which works exactly like cut paste.
I need some help since I don't know the syntax for creating shell scripts.
What I did so far is to do it in automator with Apple Script which goes like the following:
on run {input, parameters}
tell application "Finder"
set theWindow to window 1
set thePath to quoted form of (POSIX path of (target of theWindow as string))
end tell
tell application "Terminal"
do script with command "mv \"" & input & "\"" & thePath in window 1
end tell
return input
end run
This gets the copied file path from clipboard before, as input, and then recognizes the active finder window as thePath so then executes the mv command for the input file to the thePath window.
It doesn't work as expected since it connects both file/window paths into a single path instead of leaving a space between them so the mv command can't recognize two separate paths.
What's the correct syntax for that line
do script with command "mv \"" & input & "\"" & thePath in window 1
to leave a space between input and thePath under the mv command?
Also this requires the terminal app to be open in the background.
After I get this to work I want to do the exact same thing using shell script within automator, so I won't need Terminal to be open all the time.
And the next step will be to cut/paste multiple files/folders but that should be easy to do once I get the hang of it.

Try using:
on run {input, parameters}
tell application "Finder"
set theWindow to window 1
set thePath to quoted form of (POSIX path of (target of theWindow as string))
end tell
do shell script "mv \"" & input & "\" " & thePath
return input
end run
(45977)

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Trying to create a brush to watermark my photos. HELP!!

So, Im trying to create a brush to watermark my photographs, but the 'define brush preset' isnt clickable, but it is clickable with any other photo i try it with. What am i doing wrong? can someone please help me? It's quite frustrating.

Haw large in Pixels is the image?
And quite frankly I would recommend creating a Path and using »Embed Path« instead of a Brush as Actions that include Paths can be more easily transferred without the risk of forgetting the Brushes.

Trying to create a simple example. Need Help!

I'm trying to create a very simlpe examlpe using Swing components to illustrate a MVC architecture.
I have a JFrame containing a JTree and a JButton.
What I'd like to happen is when I click the JButton the JTree model is changed in some fashion and the the view is refreshed due to the models change.
If anyone out there has a simple example of any MVC architecture involving Swing components I'd love to see it.
Thx

Sure, look at any of the Sun tutorials. For example, look in your API documentation for JTree; it has a link to a tutorial about how to use JTree.

Trying to create a simple database program.....help, please

I am trying to create a database and I am having trouble gettig my code correct..........I think I am on the right track but I haven't a clue from this point, can anyone point me in the right direction as far as getting my program to have a master file and a transaction file and be able to manipulate the data........records.
import java.awt.*;
import java.applet.*;
public class recordsApplet
// Declare variables
String lstName;
String frstName;
Int socSec;
String street;
String city;
String state;
Int zip;
float rate;
Int numofdep;
//The buttons =
Button Submit = new Button("Add");
Button Change = new Button("Change");
Button Delete = new Button("Delete");
submit.addActionListner(this);
Change.addActionListener(this);
Delete.addActionListener(this);
//get input from users
System.out.println("Last Name:")
lstName = dataIn.readline();
System.out.println("First Name:")
frstName = dataIn.readline();
System.out.println("Social Security #:")
socSec = dataIn.readline();
System.out.println("Last Name:")
street = dataIn.readline();
System.out.println("Last Name:")
city = dataIn.readline();
System.out.println("Last Name:")
state = dataIn.readline();
System.out.println("Last Name:")
zip = dataIn.readline();
System.out.println("Rate of Pay:")
rate = dataIn.readline();
System.out.println("Number of Dependants:")
numofdep = dataIn.readline();
public void main(String[] args)
//store the information in a text file
try
output = DataOutputStream(new FileOutputStream("mocdb.txt"));
catch(IOException er)
system.exit(0)
//Print fields to text file
String arg = e.getActionCommand();
String code;
if (arg == "Submit")
code = "A";
elseif
code = "C";
else
code = "D";
try
output.writeUTF(code);
output.writeUTF(lstName.getText());
output.writeUTF(frstName.getText());
output.writeUTF(socSec.getText());
output.writeUTF(street.getText());
output.writeUTF(city.getText());
output.writeUTF(state.getText());
output.writeUTF(zip.getText());
output.writeUTF(rate.getText());
output.writeUTF(numofdep.getText());
catch(IOException c)
System.exit(1);
//Retrieve record from file
System.out.println("Last Name:")
lstName = dataIn.readline();
System.out.println("First Name:")
frstName = dataIn.readline();
try
record = new DataInputStream(new FileInputStream("mocdb.txt");
catch(IOException c)
system.exit(2)
//Check first and last name and get file
//Change data in file
//Delete the data in file

Sorry, but your question has nothing to do with JavaHelp. Please use another forum.
/Mauritz

Need help trying to create a ActiveX registered event

I am trying to create a register event for an ActiveX component. The problem I am having is creating the callback vi. When I right click on the VI ref and create the callback vi it is created with the user parameter as a variant. I would like this to be a control refnum. If I open the callback vi and replace the user parameter variant with a control refnum the wire from the callback vi to the VI ref is broken. How do I change the user parameter?

Joe is correct on this one. The callback where designed to take variants as their inputs, so that they are more flexible. In addition Variants are used through out ActiveX programming.
If you have a control reference that you want to pass into the VI, all you need to use is the "To Variant" function in the main VI to turn the reference into a variant. You can then inside the Callback VI you can use the Variant to Data VI to change the variant back to a reference; you simply where a constant of the reference type to the "Type" terminal.
Evan
National Instruments

Help trying to create a button in safari please.

trying to create a button that runs an applescript. I have been discussing it in 101 but cross posting it here because it's not getting much interest over there.
Any help would be nice. I have read Become an xCoder and it doesn't seem to answer my questions.
http://discussions.apple.com/thread.jspa?threadID=1514799&tstart=0

Is there no way to create an appcontroller that works like an applescript? Or get an applescript to be recognized so a new NSButton added to the Bookmark bar be activated?
i.e.
*tell application "System Events"*
* tell application "Safari" to activate*
* keystroke "n" using {command down}*
* delay 0.1*
* keystroke "l" using {command down, shift down}*
*end tell*
Or,
_Something Like:_
/ AppController /
*#import <Cocoa/Cocoa.h>*
*@interface AppController : NSObject*
*IBOutlet id NSButton;*
*-(IBAction) autoFill:,delay 0.1,checkSpelling:(id)sender*
@end
I really don't know if that AppController looks anything like it should or if it's even close.

Trying to create a condition on a BW Universe

Hi experts,
I'm trying to create a condition on a BW-Query Universe just like below:
<EXPRESSION> IIF([0HALFYEAR1].[LEVEL01].[[20HALFYEAR1]].[Value] = 1 , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7] , [Measures].[DAAP8LRPLLYPPU417LVN5XS2Z]-[Measures].[DAAP8LRPLLXY17S9W2G13IDT7]) </EXPRESSION>
i've searched a lot till get this code, but it still giving me an error when I try to execute.
Does anyone can please help me?
Thanks,
Gui Boscolo from BRZ.

Hi David,
Thanks for your answer, I've made the ajustments you have mention, but I'm still getting erros when i'm running a report with an object that contain this 'code':
<EXPRESSION> IIF(@Select(SemestreL01 Semestre Chave) = "1" , @Select(Variáveis de CálculoMontante Projetado Sem1) - @Select(ÍndicesSaldo Aplicado) , @Select(Variáveis de CálculoMontante Projetado Sem2) - @Select(ÍndicesSaldo Aplicado)) </EXPRESSION>
As you notice, now I'm using the @select function, the quotes are in the value of HALFYEAR01 ((@Select(SemestreL01 Semestre Chave) = "1") and removing the IFF function, the expression works.
The problem, is We need to have this IFF function at BO, because we're trying to complement a expression on BW that cannot be changed!! That's my problem at all!
Thanks again!

Trying to create a flash gallery

trying to create a simple clickable slideshow.
my problem i think is in the math. but i clickable picture buttons on right and left. the center clickable too.
i wanna know how can i increment decrement a variable depending on direction.
currently it seems to go in one direction which is to the right.
also can i make an array of functions: ex- function animate[count](e:event):void
or do functions handle arrays differently.
sorry if i sound stupid but its been awhile doing flash.
heres little code:
var picture:Array = new Array();
picture[1] = new pic1();
addChild(picture[1]);
picture[1].x =50;
picture[1].y =384;
picture[2] = new pic2();
addChild(picture[2]);
picture[2].x =512;
picture[2].y =384;
picture[2].scaleX =10;
picture[2].scaleY =10;
picture[3] = new pic3();
addChild(picture[3]);
picture[3].x =974;
picture[3].y =384;
var counter = 1;
    picture[1].addEventListener(MouseEvent.CLICK, animate1)
    function animate1(e:MouseEvent):void
        trace(counter);
        picture[counter+1].x =50;
        picture[counter+1].y =384;
        picture[counter + 2].x =512;
        picture[counter + 2].y =384;
        picture[counter + 2].scaleX =10;
        picture[counter + 2].scaleY =10;
        picture[counter + 3].x =974;
        picture[counter + 3].y =384;
        counter++;
5 more similar eventlisteners and function

Sorry I think I misread your code before when I responded. Well I think I have a working version of what you are trying to do. You can view what I made at http://www.jeremyseverson.com/as3/flash_gallery/index.html . I created this all in straight AS3 but it should give you an idea of what I did and give you some direction to achieve what you want.
package
     import caurina.transitions.*;
     import flash.display.Bitmap;
     import flash.display.SimpleButton;
     import flash.display.Sprite;
     import flash.events.MouseEvent;
     [SWF(backgroundColor="#000000", frameRate="31", width="800", height="300")]
     public class Main2 extends Sprite
          // EMBED ASSETS
          [Embed(source='assets/rightArrow.png')]
          private var rightArrowClass:Class;
          [Embed(source='assets/leftArrow.png')]
          private var leftArrowClass:Class;
          [Embed(source='assets/IMG_0001.JPG')]
          private var img0001Class:Class;
          [Embed(source='assets/IMG_0002.JPG')]
          private var img0002Class:Class;
          [Embed(source='assets/IMG_0003.JPG')]
          private var img0003Class:Class;
          [Embed(source='assets/IMG_0004.JPG')]
          private var img0004Class:Class;
          [Embed(source='assets/IMG_0005.JPG')]
          private var img0005Class:Class;
          [Embed(source='assets/IMG_0006.JPG')]
          private var img0006Class:Class;
          [Embed(source='assets/IMG_0007.JPG')]
          private var img0007Class:Class;
          // PRIVATE VARIABLES
          // Layout Properties
          private var imgPad:Number = 5;
          private var imgScale:Number = 2.5;
          private var btnSize:Number = 25;
          private var imgCounter:Number = 0;
          private var middleImgX:Number = 400;
          private var leftImgX:Number = 100;
          private var rightImgX:Number = 700;
          private var leftImgTransX:Number = leftImgX - (middleImgX - leftImgX);
          private var rightImgTransX:Number = rightImgX + (rightImgX - middleImgX);
          private var imgY:Number = 150;
          private var imgLeft:Sprite;
          private var imgMid:Sprite;
          private var imgRight:Sprite;
          private var imgTransIn:Sprite;
          private var imgTransOut:Sprite;
          // Image Array
          private var classList:Array = new Array(img0001Class,img0002Class,img0003Class,img0004Class,img0005Class,img0006Class,img0007Class);
          private var spriteList:Array;
          private var currImages:Array;
          // CONSTRUCTOR
          public function Main2()
               init();
          // PRIVATE METHODS
          private function init():void
               initSpriteList();
               updateInterface(imgCounter);
           * Creating an array of sprites so that my registration point
           * will be in the center of the image instead of the upper left
          private function initSpriteList():void
               spriteList = new Array();
               var tSprite:Sprite;
               var tBmp:Bitmap;
               for (var i:uint=0; i<classList.length; i++)
                    tBmp = new classList[i] as Bitmap;
                    tSprite = new Sprite;
                    tSprite.addChild(tBmp);
                    tBmp.x = (-tBmp.width / 2);
                    tBmp.y = (-tBmp.height / 2);
                    spriteList.push(tSprite);
          private function updateInterface(newPos:Number,direction:String=null):void
               var maxPos:Number = spriteList.length - 1;
               var minPos:Number = 0;
               var midPos:Number;
               var leftPos:Number;
               var rightPos:Number;
               var transInSprite:Sprite;
               // Set center array position
               midPos = newPos;
               if (midPos > maxPos) midPos = minPos;
               if (midPos < minPos) midPos = maxPos;
               // Update Image Counter
               imgCounter = midPos;
               // Set left array position
               leftPos = midPos - 1;
               if (leftPos < minPos) leftPos = maxPos;
               // Set right array position
               rightPos = midPos + 1;
               if (rightPos > maxPos) rightPos = minPos;
               switch(direction)
                    case "L":
                         currImages[0].removeEventListener(MouseEvent.MOUSE_DOWN, moveRight);
                         currImages[2].removeEventListener(MouseEvent.MOUSE_DOWN, moveLeft);
                         // Add transition in img
                         transInSprite = spriteList[rightPos];
                         transInSprite.x = rightImgTransX;
                         transInSprite.y = imgY;
                         transInSprite.scaleX = transInSprite.scaleY = .05;
                         transInSprite.alpha = 0;
                         addChild(transInSprite);
                         Tweener.addTween(transInSprite, {x:rightImgX, alpha:1, scaleX:1, scaleY:1, time:0.5});
                         Tweener.addTween(currImages[0], {x:leftImgTransX, scaleX:.5, scaleY:.5, alpha:0, time:0.5, onComplete:removeImage, onCompleteParams:[currImages[0]]});
                         Tweener.addTween(currImages[1], {x:leftImgX, scaleX:1, scaleY:1, alpha:1, time:0.5});
                         Tweener.addTween(currImages[2], {x:middleImgX, scaleX:imgScale, scaleY:imgScale, alpha:1, time:0.5});
                         break;
                    case "R":
                         currImages[0].removeEventListener(MouseEvent.MOUSE_DOWN, moveRight);
                         currImages[2].removeEventListener(MouseEvent.MOUSE_DOWN, moveLeft);
                         // Add transition in img
                         transInSprite = spriteList[leftPos];
                         transInSprite.x = leftImgTransX;
                         transInSprite.y = imgY;
                         transInSprite.scaleX = transInSprite.scaleY = .05;
                         transInSprite.alpha = 0;
                         addChild(transInSprite);
                         Tweener.addTween(transInSprite, {x:leftImgX, alpha:1, scaleX:1, scaleY:1, time:0.5});
                         Tweener.addTween(currImages[2], {x:rightImgTransX, scaleX:.5, scaleY:.5, alpha:0, time:0.5, onComplete:removeImage, onCompleteParams:[currImages[2]]});
                         Tweener.addTween(currImages[1], {x:rightImgX, scaleX:1, scaleY:1, alpha:1, time:0.5});
                         Tweener.addTween(currImages[0], {x:middleImgX, scaleX:imgScale, scaleY:imgScale, alpha:1, time:0.5});
                         break;
                    default:
                         // Add left img
                         spriteList[leftPos].x = leftImgX;
                         spriteList[leftPos].y = imgY;
                         spriteList[leftPos].scaleX = spriteList[leftPos].scaleY = 1;
                         addChild(spriteList[leftPos]);
                         // Add middle img
                         imgMid = spriteList[midPos];
                         spriteList[midPos].x = middleImgX;
                         spriteList[midPos].y = imgY;
                         spriteList[midPos].scaleX = spriteList[midPos].scaleY = imgScale;
                         addChild(spriteList[midPos]);
                         // Add right img
                         spriteList[rightPos].x = rightImgX;
                         spriteList[rightPos].y = imgY;
                         spriteList[rightPos].scaleX = spriteList[rightPos].scaleY = 1;
                         addChild(spriteList[rightPos]);
               spriteList[leftPos].addEventListener(MouseEvent.MOUSE_DOWN, moveRight);
               spriteList[rightPos].addEventListener(MouseEvent.MOUSE_DOWN, moveLeft);
               currImages = [spriteList[leftPos], spriteList[midPos], spriteList[rightPos]];
          private function removeImage(spriteRef:Sprite):void
               removeChild(spriteRef);
          // EVENT HANDLERS
          private function moveRight(e:MouseEvent):void
               imgCounter--;
               updateInterface(imgCounter,"R");
          private function moveLeft(e:MouseEvent):void
               imgCounter++;
               updateInterface(imgCounter,"L");

Trying to create a password protected disk image in 10.8.4

Trying to create a password protected disk image in 10.8.4. I follow steps in Apple:Support but I get an error saying "Resource busy"?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Trying to create a text that is on fire or more like a hot branding iron

Trying to create a text that is on fire or more like a hot branding iron

Something like this?
That was from a project I did a few months ago. Sounds similar to what you want. I did that in After Effects.
Basically all I did was add a glow effect to the text and messed around with the glow parameters. The black smoke is animated and moves on the actual video and is basically some pre keyed smoke footage that I had. The smoke was originally gray but black looked cooler.
I'd say it's pretty close to your hot branding iron thing.

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "

Trying to create a Photomerge in Bridge, when the files open in Photoshop ( small jegs ) , I get a error message of " Unable to process latte files " / " null is not an object "
Please help

Wait a second, Photoshop can make lattes now? Personally I prefer my coffee black, but man have I been under-utilizing this program.

Trying to create

Similar Messages

Maybe you are looking for