Trying to delete a routing task list (N) and getting an error on CA98

Getting an error when trying to delete a task list routing without archiving using t-code CA98. 
Error:       "Task list 01184667 01 (type 01184667) is still used in inspection lots"
The inspection lot is for a production order. The routing I am trying to delete was used in that production order.
I found the inspection lot and there is a UD of accept on it but I cannot delete the task list routing.
If I archived the task list routing for the material and tried to delete the task list routing would I still get the same error as above?
Tom

You can use CA98 only for test data which you no longer intend to use or refer to. I don't think even CA99(with archiving) can help here. Please check the dependencies for deletion of routings: [http://help.sap.com/saphelp_47x200/helpdata/en/7e/d41b73455911d189400000e8323c4f/content.htm]
Thanks,
Anil

Similar Messages

  • Trying to install itunes on windows 7 pc and get an error message "service apple mobile device failed to start"

    trying to install itunes and getting this message
    "Service Apple Mobile device failed to start"

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I am trying to update Photoshop & Premier Elements 11 and get this Error Code: U43M1D207

    I am trying to update both Photoshop & Premier Elements 11 and get this Error Code: U43M1D207.
    Can anyone help ?

    Try downloading the updates manually from http://www.adobe.com/downloads/updates/
    Thanks
    Nikhil

  • Is there a was to do a mass delete on General Task List

    Hello,
    Is there a way to do a mass delete on General Task List?
    Thanks.

    hi
    Kindly check the T code IA25 ,just specify the key date as today and execute .
    regards
    thyagarajan

  • I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well.  All my songs are in the music folder but not in the itunes folder??  itunes did not prompt me to move file to trash nor is there an option??

    I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well.  All my songs are in the music folder but not in the itunes folder.  itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin.  How can i  delete songs from both the itunes and hard drive at the same time?

    aespinoza2210 wrote:
    could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
    A Espinoza,
    The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities.  So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
    However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11. 

  • TS1503 Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Hi there AnthPy,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    -Griff W. 

  • I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    I've can't open any applications on my Mac ! I tried to delete some files from safari (history) and then none of the apps including iphoto, safari, mail, facetime. I don't know how to fix it, help ? any idea ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iPod will not show up in the Itunes device list plus I get an error message

    Hello!
    My iPod will not show up in the Itunes device list plus I get an error message
    " One or more devices is getting too much power from the USB wire" or sumptin like that.
    I've tried this with two wires, so the problem is not there.
    I reseted the iPod to factory settings but it didn't help.
    Anyone??

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another USB port and computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • When i am trying to create BI Universe on InfoCube I am getting this Error

    Hi All,
    I am using BOE 3.1
    When i am trying to create BI Universe on InfoCube I am getting this Error
    DBD: A runtime exception has Occured. (Error Getting list of Cubes of catalog $INFOCUBE: Unknown error)
    Same  when i am connecting to BexQuery Im not getting any error i am able to create the OLAPUniverse on BI Query.
    My question is why i am getting this error when i click on the Infocube in the Designer. Did i am missing any thing in the Universe designer.
    Regards,
    Ravi

    HI,
    Please go through by below link.
    DBD: A runtime exception in Universe Designer
    Thanks,
    Amit

  • I tried to reinstall iCal from Disk and get an error

    I deleted info.plist from my iCal package. I had read somewhere that if I deleted that all old files in my iCal would be deleted. But instead what happened is I get an error when I try to start "2008-05-19 15:29:46.693 iCal[9051:10b] No Info.plist file in application bundle or no NSPrincipalClass in the Info.plist file, exiting logout" So then I tried to reinstall iCal from Disk and get the error "The Installer could not validate the contents of the 'iCal' package. Contact the software manufacturer for assistance"

    lizesc,
    Welcome back to Apple Discussions.
    I deleted info.plist from my iCal package.
    Just for the edification of other users, you should never alter any files inside of an application package.
    Drag your current copy of iCal to the trash, and then follow these steps to reinstall iCal:
    1. Insert your Leopard Installation disk into the computer.
    2. The disk will appear on your desktop.
    3. Double click on the "Optional Installs" folder.
    4. Double click on the "Optional Installs.mpkg."
    5. Click on (Continue) in Introduction.
    6. Click on (Continue) in Software License Agreement.
    7. Click on (Agree) to agree to the terms of the software license agreement.
    8. Click on the disclosure arrow ▶ next to Applications.
    9. Select (✓) iCal.
    10. Click (Continue).
    11. After iCal has been reinstalled, download and install the OS X 10.5.2 Combo Update.
    ;~)

  • I'm trying to upgrade to the latest iTunes, but keep getting an error message C:\config.msi\7db625.rbf

    Please help
    I'm trying to upgrade to the latest iTunes, but keep getting an error message C:\config.msi\7db625.rbf

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • When trying to sync my iPad to my computer, I get the error "the iPad is synced with another iTunes library.

    When trying to sync my iPad to my computer, I get the error "the iPad is synced with another iTunes library. An iPad can be synced with only one iTunes library at a time." I only have one iTunes account, so I am a little confused. If I select the option to "Transfer Purchases, I get an error message that says "Attempting to copy to the disk failed. You do not have enough access privileges for this operation."
    Any suggestions is appreciated.

    Have you synced to this computer before?

  • I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page

    i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer  but  i get a error stating server unavailable' .  please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

    Contact Apple support for warranty service.

  • I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this.

    I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!

    Repair your Apple software update.
    Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR

Maybe you are looking for

  • Idoc for Incoming Payment lot creation

    Hi Experts, Currently i am working on an inbound interface which  has the requirement of Incoming payment interface from a Payment Processing center  which processes payment (cheques, payment stubs for over the counter payments, etc) and sends daily

  • I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

    I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

  • Could not create WMI locator class (80040154) - Win7 x64 OSD

    Hello All, I'm attempting to deploy a Win7 x64 OS to a Dell Optiplex 3010 through SCCM 2012 via PXE, a process I've done many times in the last few months. All of a sudden, on this one machine, I can't get it to work. The first strange thing that hap

  • DTW: DocEntry/ DocNum/ LineNum

    Dear Experts Could you please guide me how to import many items in one document? When I imported 2 tables via DTW, I always do like this Header: DocEntry 1 2 3 Line: DocNum  LineNum ItemCode 1                      A 2                       B 3       

  • "Sales Basic Price" in vf02 (conditions tab)

    after running vf02 we enter billing document. we double click on item description we get many tabs. in that in 'condition' tab I want to fetch "Domestic list price"  and "Sales Basic Price". I got value of "Domestic list price" from komv table with K