Trying to determine if ITouch is misplaced or stolen

I am not sure if my ITouch was stolen or misplaced. If still shows as registered to me in my list of products, does that mean no one else is using it. Can Apple tell me if it is in use by someone else?

Apple will not help. I do not know the answer to your first question.

Similar Messages

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

I am trying to determine which generation of I pad I have. I no longer have the box.

I am trying to determine which generation of I pad I have. I no longer have the box.

- get the serial number - (settings / general / about), and put it in this web site - https://selfsolve.apple.com/agreementWarrantyDynamic.do. This will show the make and model of the device.

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I am trying to determine how I can take an email without an attachment and save it to a folder. I am not able to paste the message anywhere. I can copy but to no avail. I want to set up folders in email to move and save emails. How can this be done?

I am trying to determine how I can save emails into folders in my email account. No ability to create a folder to move an email over into. How can I do this?

If you are using iPad Mail app, in the left hand column tap the arrow in the top left corner until you return to where your main email address appears. This is the main account screen.
Then tap the email address/account once.
In the left column in the upper right, tap the Edit button.
At the bottom of the left column/panel there is a New Mailbox button.
Tap the button. At the top of the left column, a keyboard entry field appears.
Thiis is where you tap and enter the name of your new Mailbox folder.
Once done naming, click the done button at the top right of the left column and you are done.
This is how you add additonal mailbox folders to your email account.
Once the mailbox folders you need are created, you can return to any email entry, Tap the Edit button in the upper right of the left column, again. A button appears next to all the emails in the left column.
Tap the buttons for the ones you wish to move to a particular mailbox folder, at the bottom of the left column, choose the Move button, then pick the mailbox folder to move the emails to and they will automatically move to that mailbox folder.

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

ITunes freezes when trying to determine gapless playback on Ipod.

Hi, I have quite a problem and I hope someone can help me out here.
Ever since updating to the latest iTunes, I've been experiencing problems with syncing it with my iPod. I manage my files manually. When copying files to my ipod, the files seem to transfer allright, but the whole system freezes up (iTunes not responding in task manager) when it tries to determine gapless playback.. I've tried giving it up to 3-4 hours for a single album, but nothing happens, and the files on the iPod wont play, because they are corrupt.
Is there anyway to disable this terrible gapless playback feature, it's driving me crazy.
Prior to asking this question I've tried the five r's. Same result..
Thanks in advance
4.Gen 20GB iPod Windows XP Pro

I too am having the exact same problem but I have my tracks in iTunes so I don't think this is the issue...
Did you find a fix for this? It is making it impossible for me to load any new music on my iPod

My daughter was trying to update her itouch and somehow lost everything on it. She had a different ipod before this one, and I think we never registered this one, so it seems the computer restored her itouch to what was on her previos ipod. Any ideas?

My daughter was trying to update her itouch and somehow lost everything on it, but itunes seems to have restored it back to what was on an older ipod she used to have. I don't think we ever registered her itouch, and I know she didn't back it up to the computer. Any chance of getting her stuff back? She lost hundreds of pictures.

- You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- On the computer go to iTunes>Preferences>Devices and see if there is a backup of her iPod.
Note that the backup does not included synced media like apps and music.
- Is she update the iPod via iTunes on other then the computer she syncs with the media on the iPod gets erased. Same for if on the syncing computer if the media was not in the iTunes library.

Trying to determine how upgrades will affect performance

I'm very unfamiliar with tech talk, so if someone can please help me out and do their best to explain this in lay terms that would be awesome.
I am currently on the A0 cloud service instance and would like to know whether moving to the A1 cloud service instance would improve the speed performance of our web portal? I assume it would, but are there any metrics to quantify this? i.e. how much faster
will the system be?
Will any other aspects of the website's performance be improved, and if so, what?
I'm trying to determine whether the upgrade would be worth the added subscription costs (price will go from $20 to $120 per month).
Thanks!

Hi,
Moving from A0 VM size instance to A1 VM size will surely improve the speed performance.
But the overall performance depends on many factors like network, website traffic , disk performance.
Along with increasing the size, buying more bandwidth could be a good move as well.
You May Refer to these links :
http://azure.microsoft.com/en-in/pricing/calculator/
https://msdn.microsoft.com/en-us/library/azure/dn197896.aspx.
Feel free to connect with me for any more queries.
Hope this helps.
Thanks.

Trying to determine costs per concurrent user

I have tried to investigate the services and theirs costs as well as I can and tried to get help. However I have very little experience with hosting and databases so after all this research I'm left with a bunch of questions.
Forgive me if this is too many for this kind of forum, if so, could you please refer me to where I can learn more?
We're developing a multiplayer browser game in Unity3D. The game will communicate with a SQL database. I'm trying to determine how much it will cost me per Monthly Active User (MAU) and per Concurrent User (CCU). To do so I need some things clarified. In order
to determine which feature will be the most limiting and therefore define which performance level I need.
They will on average communicate with the database app. two times a minute (defined as two queries per minute). Does this mean that I need a transaction rate of at least two per CCU?
How fast can you open and close a session? I'm trying to figure out whether I need to have one session open constantly per user connected to the game. If so, I suppose max sessions would be equal to CCU?
If I need more CCU than one database of a given performance level supports can I then just subscribe for more databases which will then automatically become copies of one another and you will divide users between the databases automatically?
As I understand your description of your database services through Basic, Standard and Premium, the database will be able to work independently of additional webhosting. However then I do not understand why there is no info in regards to bandwith limitations.
Do I need your webhosting services along with subscribing for the database? Then I suppose the bandwith limitations of the webhosting applies for the database as well?
In regards to the webhosting, besides for maybe handling the database, the website's by far most demanding service will be to allow users to download a game of max 30 MB. How can I estimate how many users will be able to download simoultaneously from a given
VM instance, e.g. basic 1?
If the database depends on this website for communication to the game, how can I then estimate how demanding that will be to the power of a given VM instance?
I realise that some of these questions may be difficult to give precise answers to but any help with getting closer to an answer is highly appreciated.

This is by no means accurate and complete, but will give you an idea about how to go about doing estimates:
First you need to know what database tier you need: basic, standard or premium.
The tier you need depends on the processing power you need, and directly relates to the number of concurrent users you have at any given time and the processing requirement of the database.
You can determine this only after you do some benchmarking of your app.
Supposed you have 100 users and you need basic tier S0, then cost per user will be (cost for S0)/100.
Then you need cost for your web service/site.
Again you need to know how powerful it needs to be.
You can determine this only after you do some benchmarking of your app.
Again supposed you need a A3 then cost per user will be (cost of A3)/100.
Then you need cost for data transfer from your web service to your user.
Supposed every data transfer is 10K, then you have 20K/min.
Supposed a user stays in your game for an hour, then you have 1.2M/user/session.
Supposed the user plays 10 times/month, then you have 12M/user per month. Then you can calculate the cost per user.
I suppose you can safely assume that bandwidth is not a limitation in Azure for your app for the moment.
Frank

HT6147 I tried to restore my Itouch 4th generation, and it took 7 hours!!! Then, nothing happened. It was not restored at the end of the 7 hours. Today, each time I try to restore, it tells me it will take 7 hours again!!! *** is this?? Why cant I fi

I have been trying to restore my Itouch because I am having many issues with its functioning! I have it all backed up and ready to restore and each time I attempt to restore, it goes through 7 hours of NOTHING!!! I wait and after the time has elapsed, nothing has changed. Am I doing something wrong? I have restored it before with no trouble. For some reason, it will NOT restore and it will NOT function properly. I need help understanding why it is taking 7 hours to do nothing - I am using my computer (o/s XP). HELP!! I am beyond frustrated!! Thanks!

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer

I have Itunes 10- i am usinf windows 7- i am trying to upgrade my itouch 64gb 4.2.1 to ios5 - but keep getting an error meassage at he end saying check network connection- timing out- yet network is on??? Help!

i have itouch 64gb, i have itunes 10 loaded -trying to upgrade to Ios5 - at the end of the long dowload is says- chack network connection-= network times out- yet network is on as is Ipod- whats up?

I'm not certain thats the problem. I stopped antivirus, I set screensaver to NOT trigger and yet it took me FOUR DAYS to completely sync my ipod touch. Stupid me decided to try it with the iPad and guess what...it's been three days and STILL timing out.
I don't think Steve Jobs died; I think they upgraded him to iOS5, he crashed and they could not restore him.
THIS UPGRADE *****. They rushed it out the door to get the fancy-dancy voice command thing on the iphones and yet that feature does not help ipod or ipad users.

Trying to determine the last occurence of a number within a word string.

Hi All,
I am trying to find the last occurence of a number within a string. I have had a quick look at the Java Tutorial and know about lastIndexOf and substring. The thing is I have to test for the existance of the numbers 0-9 within a product code that typically looks like this:
s1_14G12B
s1_17G1BA
s2_24GD
The only part of the above strings that I am interested in is the letter(s) that follow the very last number, so in the case of those codes presented above, I would like to extract the following:
B
BA
D
I have written some code that performs a similar operation:
public class FindPriceCode
private String priceCode;
private String[] numberValues = {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9"};
public FindPriceCode()
    priceCode = "s2_71G4BA";
    for(int i=0; i<numberValues.length; i++)
      int location = priceCode.lastIndexOf(numberValues);
System.out.println("Character " + numberValues[i] + " found at position: " + location);
public static void main(String[] args)
FindPriceCode myPriceCode = new FindPriceCode();
...finding the location of numberValues string within the given example code. I am now at a loss as to how I can determine the location of the last number occurence (moving right to left) and then build a substring from that number. Any help will be greatly appreicated.
Thanks
David

Hello,
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class CutNumberTest extends JFrame implements ActionListener {
     private JTextField input= new JTextField(10);
     private JTextArea result=new JTextArea(10,10);
     char[]numbers=new char[]{'0','1','2','3','4','5','6','7','8','9'};
     public CutNumberTest() {
          super("CutNumberTest");
          setDefaultCloseOperation(DISPOSE_ON_CLOSE);
          JButton cutButton = new JButton("cut number");
          cutButton.addActionListener(this);
          JPanel topPanel=new JPanel();
          JLabel label=new JLabel("Please enter price-code:");
          topPanel.add(label);
          topPanel.add(input);
          topPanel.add(cutButton);
          getContentPane().add(topPanel, BorderLayout.NORTH);
          getContentPane().add(new JScrollPane(result));
          pack();
          setLocationRelativeTo(null);
     public void actionPerformed(ActionEvent e) {
          char[] code=input.getText().toCharArray();
          int counter=code.length;
          boolean lastNumFound=false;
          while(!lastNumFound && --counter >= 0)
               lastNumFound=isNumber(code[counter]);
          result.append(lastNumFound ? "result: "+input.getText().substring(counter+1)+"\n" : "No number found!\n");
     private boolean isNumber(char chr){
          boolean isNumber=false;
          int counter=-1;
          while(++counter < numbers.length && !isNumber)
               isNumber=numbers[counter]==chr;
          return isNumber;
     public static void main(String[] args) {
          new CutNumberTest().setVisible(true);
}//copy/paste:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class CutNumberTest extends JFrame implements ActionListener {
     private JTextField input= new JTextField(10);
     private JTextArea result=new JTextArea(10,10);
     char[]numbers=new char[]{'0','1','2','3','4','5','6','7','8','9'};
     public CutNumberTest() {
          super("CutNumberTest");
          setDefaultCloseOperation(DISPOSE_ON_CLOSE);
          JButton cutButton = new JButton("cut number");
          cutButton.addActionListener(this);
          JPanel topPanel=new JPanel();
          JLabel label=new JLabel("Please enter price-code:");
          topPanel.add(label);
          topPanel.add(input);
          topPanel.add(cutButton);
          getContentPane().add(topPanel, BorderLayout.NORTH);
          getContentPane().add(new JScrollPane(result));
          pack();
          setLocationRelativeTo(null);
     public void actionPerformed(ActionEvent e) {
          char[] code=input.getText().toCharArray();
          int counter=code.length;
          boolean lastNumFound=false;
          while(!lastNumFound && --counter >= 0)
               lastNumFound=isNumber(code[counter]);
          result.append(lastNumFound ? "result: "+input.getText().substring(counter+1)+"\n" : "No number found!\n");
     private boolean isNumber(char chr){
          boolean isNumber=false;
          int counter=-1;
          while(++counter < numbers.length && !isNumber)
               isNumber=numbers[counter]==chr;
          return isNumber;
     public static void main(String[] args) {
          new CutNumberTest().setVisible(true);
Regards,
Tim

Trying to determine empty field using cfif

Greetings all!
I'm trying to get an app to determine which set of form
fields to write to based on the first empty set it finds.
i.e. <cfif> if set 1 is empty, write here
<cfelseif> set 2 is empty write here, etc.
using... <cfif QUERY.FORMFIELD IS ""> Thinking that
this will look to see if the field is NULL and decide to write here
or look to the next option.
Any thoughts?
Thanks!
David

It seems to look at the table and then write to field 1
anyway. I was hoping there was a better way to say "if something is
there goto the next field, etc. I'll attach the code from the part
I'm talking about. That might make more sense.

Trying to determine if ITouch is misplaced or stolen

Similar Messages

Maybe you are looking for