Trying to determine if we need the Java stack for ERP 6.0 upgrade

An issue we have regarding our research of a potential ERP upgrade to 6.0 has to do with the potential requirement to add the Java stack to the WAS engine that support our ERP. This appears significant due to the impact on infrastructure requirements and operational support. Based on the master guide for ERP 6.0, it appears that the following components would require the Java stack or usage type AS-Java:
- Biller Direct 6.0
- Learning Solution LSO (CP) 600
- ESS/MSS -- XSS 6.0
- Extended E-selling Components, XECO 5.0
- Enterprise Portal Content for Business Packages
- XI Content, Elster 2.0
Is this the complete list? Will other components of ERP or ehp's require the Java stack in the future? How likely is it that the Java stack will become a requirement for us to support ERP?
Thanks,
Thomas

Yes, this is correct if Java Stack is already install but I understand from the question that they do not have Java installed already so if they plan to go to ECC 6.0 ABAP Stack they won´t need to install Java stack before or after upgrade.
They only need to do it´s upgrade to Abap stack to ECC 6.0 and in fact if actual 4.7 is non unicode they won´t need to make it unicode before or after either, just when installing ECC 6.0 SR3 then Unicode is the only way to intall it.

Similar Messages

Do I need to have a JAVA Stack for normal ECC 6.0 ?

Hi together,
we want upgrade our R/3 4.7 to ECC 6.0.
Do I need JAVA deployment on my ERP system as part of the upgrade?
What funktions are in the JAVA Stack for ECC?
best regards,
Carsten Schulz

Just as advise:
I would highly avoid any dual stack installations nowadays. You can install the J2EE engine on the same host but use a different SID so you have two separate instances.
Markus

Do we require Java stack for ADS?

Hello Experts
i am planning to work on Adobe forms on ECC6. Since it is our ECC system we don't have ABAP stack to that.
i went through some ADS documentation which says to add java hostnames and port numbers to the ADS Comm channel. also it seems from the architecture that ADS runs into the java stack.
hence do we require java stack for running ADS or we can install a patch of the same.
Thanks in advance.
Regards
Rajeev

Hello,
the ADS is a JAVA Webservice >> You need the Java stack.
Please use the search function!
Best regards,
Dezso

Do I need the 'java-polling-amf in my services-config.xml if I'm using coldfusion

Do I need the 'java-polling-amf in my services-config.xml if I'm using coldfusion?
Im using IntelliJ IDEA with a flex project and for some reason its stopping comilation with this error:
[SUITE (Flex Application 1)] flex.messaging.config.ConfigurationException: The services configuration includes a channel-definition 'java-polling-amf' that has an endpoint with a context.root token but a context root has not been defined. Please specify a context-root compiler argument.
when I was using flex builder with CF builder I never needed to specify the context.root

I don't use IDEA, so I don't know what kind of configuration settings it has for Flex project development.
You don't need the java-polling-amf channel for CF development. By default, CF development uses CF-specific channels:
my-cfamf
cf-polling-amf
my-cfamf-secure
any custom channels you've created yourself for CF to use
That said, all the channels require a context root setting for your project to compile properly. If you still have Flash Builder handy, take a look at your compiler switches for a project there to see what you're missing in IDEA.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Need I the JAVA Addin for Web dynpro ABAP

Hello Experts,
have I to install the JAVA-Addin for using Web dynpro ABAP?
Best regards
Heike

No you don't, but when you want to use your application in Portal, you. Or if you want to use Adobe Interactive Forms, than too you need java.

HT4061 I have an Iphone 4, which I tried to download the new IOS 7 update on, but it says, on screen, connect to Itunes! I have tried but it says i need the original cd?? Help???

Hi can anyone help? I have an Iphone 4 which I tried to download ios7 to, but it says on screen, connect to itunes, which I have tried, but it says I need the original cd? I dont recall receiving one, so does this mean the phone has to be reset, if so how?
Thanks in advance, Tracy.

Do you have the latest version of iTunes installed on your computer as you will need it? It can be downloaded from the Apple site via the iTunes menu at the top of the screen.
It sounds like your phone is in Recovery Mode, more on this here: http://support.apple.com/kb/HT1808
Regards,
Steve

How do I install the java plugin for firefox 22 under windows XP when I have no internet connection (I have a local appache server)

I have jre 1.6 installed on the target machine.

Need the java executable offline, go to the link you indicated from another computer or from your phone and download the executable that gets "out of line". Then you load it into your computer and run it.
http://java.com/es/download/manual.jsp#win
Hope that helps.
A greeting!!

Couldnt upgrade the java stack after upgrading the abap to ehp1

Hi
I have upgarded the system to ehp1 but i couldnt continue to upgarde the java stack to 18th patch.The reason is it coudlnt find the file JSPM02P-2-20002796.SCA. I couldnt find this file . i couldnt find only this file JSPM02P_4-20002796.SCA . I tried to put this file in inbox and tried to run the jspm but it is not recognizing this as a valid file and its expecting JSPM02P-2-20002796.SCA. I couldnt find this file can anyone suggest me where i could find this file.
Thanks and Regards
MA.Sreenivasan

When you download the files, be sure to select "Save As File", which next to the "Add to Download Basket" button. Copy that SPStab.xml file to your EPS/in directory. Without that, it won't recognize the files even if they are there.

ADS in the Java stack of a Dialog instance on Windows + CI on iSeries

Hi,
I read the document "Using Adobe Document Services with SAP on IBM DB2 for i5/OS".
Summary of the document -
There are two possible technical scenarios:
1. ADS in the Java stack of a Dialog instance on Windows
1.1. ABAP+Java dialog instance on Windows
1.2. Java dialog instance on Windows
2. ADS in a SAP system on a supported platform
2.1. ABAP+Java central instance on Windows/Unix
2.2. Java central instance on Windows/Unix
The document recomammeds technical scenario 1, that is, install a Windows Dialog instance.
Choosing an ABAP+Java or Java system depends on the usage scenario for Interactive Forms:
- Interactive PDF use: Java mandatory, ABAP+Java possible
- Interactive use in SAP Maanger Self_Services/batching of forms:
ABAP+Java mandatory but Note 993612 describes the status for NW04s SP12 onwards.
End of summary -
Our prefered rechnical scenario is: "1.2. Java dialog instance on Windows" to minimice resources.
Our usage scenario for Interactive Forms includes "SAP Manager Self- Services".
Our interpretation of note 993612 is that we do not need double stack installation. Could you confirnm this ?.
If yes, we are going to install a Java Dialog instance on Windows connected to our Java Central instance on iSeries (our SAP Portal system) to use ADS.
Best regards.

Hello Torrell,
your statements sound reasonable, also including SAP Note 993612.
To decide, though, whether a single stack would be enough (especially based on the aforementioned note), you will need the advise of an ADS application expert (or someone else who has implemented your scenario, independent of the platform).
I thus assume that you will not get an answer in this forum. Your question is ADS application specific.
When you know for sure that a single stack will be enough, your approach to use a Windows dialog instance will be fine.
Best regards, Barbara

How to access the java stack table "xi_af_msg" from the ABAP engine.

Hello Guys,
How to access the java stack table "xi_af_msg" from the ABAP engine.
I need to access this table.

These 3 are the tables that are for XI Adapter in ABAP Stack.
SWFRXICNT
SWFRXIHDR
SWFRXIPRC
You can also try the following tables.
SXMSAEADPMOD                   XI: Adapter and Module Information
SXMSAEADPMODCHN                XI: Adapter Module Chains
SXMSAEAGG                      XI: Adapter Runtime Data (Aggregated)
SXMSAERAW                      XI: Adapter Runtime Data (Raw Data)
Cheers,
Sarath.
Award if helpful.

NW04 system copy : we only need the abap stack

Hello,
We have a BW 3.5 Production environnement :
Netweaver 04
Oracle 9.2
ABAP + JAVA stack have been initially installed on the same server but the java instance parameters have been since deactivated. The Java stack has never been used.
Now, we're planning to install the same BW 3.5 QAS environnement (only the abap stack), configure it, and afterwards perform a typical homogeneous system copy (backup/restore) from the production environnement.
Since we don't need at all the java part, do you think that could work ? Is there any risk of inconsistency ?
Or do we have to install double a stack QAS enviroonement and then perform the system copy based on sapinst
Thank you in advance for your help.
Regards.

You will have to perform following steps
1. Export the CI system on Source system
2. Clone the source Database to Target database. We have used IBM's Flash copy tool to accomplish that.
3. On target install SCS , restore the DB and then import CI.
We also have dual stack in ECC Production environment and we don't use JAVA as much.
If you have any more questions, please let me know.
Thanks
Sumit Mathur

I need the check list for SOLMAN implementation

Hi gurus ,
i need the check list for solution manager implementation and what are the things to be discuss with the client , i am new to SOLMAN, i have to do this by the evening , any one can help me out
Cheers
Gopal.rao

Hi Gopal,
I am not sure if this thread of yours is in continuation of the other thread you have started which has been replied by two other Forum members.
The checklist depends upon which Scenario(s) of SolMan you are trying to implement.
- Implementation/ Upgrade of ERP systems
- Service Desk
- Change Request Monitoring
- Diagnostics
- Solution Monitoring (includes BPM/ Interface monitoring)
- Delivery of SAP Services (EWA, .....)
Unless you specify the scenario you are seeking information on, it is difficult for anyone to pose a satisfactory reply.
Best regards,
Srini

Preventing the Java stack crashing due to memory issues

Hi all,
We have a SAP PI 7.0 installation and we have encountered issues with Java mappings utilizing all available memory on the Java stack and causing the server to slow and eventually crash. The original issue was caused by a poorly coded map, but as this is a large installation we want to protect ourselves against any other poor coding that may be on the system or introduced later.
Are there any configuration options within the WEB AS whereby we can either limit the amount of memory available to the execution of any one mapping, or that will enable the server to stop processing once a set limit is reached?
Any help will be much appreciated.
Many thanks
Ian

HI,
Pls find the below links about javastack
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
pls find the below links for java stack trouble shooting.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/(Kernel)OOM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/commonissues__vmsettings
Reward points if needful.
Thanks,
RamuV

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook

http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Trying to determine if we need the Java stack for ERP 6.0 upgrade

Similar Messages

Maybe you are looking for