Trying to determine which account can open my books.

I've been using DE with four Overdrive Libraries for a few months now and it's worked well. Some of these libraries also have 3m and Axis 360. At some point, I think I addiitionally authorized DE to use 3M. Last night I used a new vendor that required me to erase previous authroization of DE and re-authorize using their service in order to read one book. I read the book and then re-authorized with my Adobe ID. Now my issue is that none of the books that I have on loan from my libraries are available for me to read or return. I downloaded two new books from a library last night under the authorized Adobe ID and after erasing and reauthorizing DE with that Adobe ID, niether of those books can be opened, nor can any of the other, borrowed previous to authorization library books, be opened. Setting aside the issue of these two new books that can't be opened with the Adobe ID I knew they were borrowed/downloaded with, how can I determine the nature (Vendor and ID) of whatever my other current borrowed books are? And now that these two books aren't working under a known ID, how can I determine whether or not the same issue isn't affecting all of the other books I've borrowed from Overdrive that may have been borrowed under the same ID? SO basically, I'm asking for help determining which books were borrowed under which ID and once that's established, whether or not that is in fact the issue that's keeping them from being accessible.
Note: I do have a granular back up, and if there is a need to restore system or preference files to what they were yesterday, I'd just need to know what those files are in order to get back to a working DE library. I'm working with an iMac running Mavericks, DE 2.0.

Hello Shannon
it should be eth1 port.

Similar Messages

I am trying to determine how I can take an email without an attachment and save it to a folder. I am not able to paste the message anywhere. I can copy but to no avail. I want to set up folders in email to move and save emails. How can this be done?

I am trying to determine how I can save emails into folders in my email account. No ability to create a folder to move an email over into. How can I do this?

If you are using iPad Mail app, in the left hand column tap the arrow in the top left corner until you return to where your main email address appears. This is the main account screen.
Then tap the email address/account once.
In the left column in the upper right, tap the Edit button.
At the bottom of the left column/panel there is a New Mailbox button.
Tap the button. At the top of the left column, a keyboard entry field appears.
Thiis is where you tap and enter the name of your new Mailbox folder.
Once done naming, click the done button at the top right of the left column and you are done.
This is how you add additonal mailbox folders to your email account.
Once the mailbox folders you need are created, you can return to any email entry, Tap the Edit button in the upper right of the left column, again. A button appears next to all the emails in the left column.
Tap the buttons for the ones you wish to move to a particular mailbox folder, at the bottom of the left column, choose the Move button, then pick the mailbox folder to move the emails to and they will automatically move to that mailbox folder.

How to determine which file descriptor opened my driver?

Suppose a user process opens my driver twice. How does open() determine which file descriptor opened the device? In Linux, the kernel will pass a pointer to a structure which represents the open file descriptor. However, Solaris only passes the device number to open(), so I can only determine my device was opened, but not which file. I need this information because my driver needs to keep track of all file descriptors opened for the device.
Thanks!
-Darren

I'm still at a loss why you need to know the file descriptor value (unless the app is sufficiently spaghettied that it has to query the driver to figure out what it opened with what). It's like asking what filename was used to open the device (which you can't get either). Since Solaris is based on a Streams framework, it would be bad to have drivers to even think it has a direct mapping into user space. It would be the same in asking (using /bin/sh):
prog3 4>&1 3>&1 2>&1 | prog2 | prog1
and you want to know from prog1 what descriptor prog3 wrote to. I don't see how linux even does this properly, since any given file open can have multiple file descriptors (via dup).

I am trying to determine which generation of I pad I have. I no longer have the box.

I am trying to determine which generation of I pad I have. I no longer have the box.

- get the serial number - (settings / general / about), and put it in this web site - https://selfsolve.apple.com/agreementWarrantyDynamic.do. This will show the make and model of the device.

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Can anyone tell me which program can open ink file.

Can anyone tell me which program can open ink file.

Mimio is one possibility: http://www.mimio.com/

I can open a .book file but not a .fm file with FM 10.0.2

I can open FrameMaker 10 through the EXE.
I can open FrameMaker 10 through a .book file.
I can open a .book file from FrameMaker 10.
I cannot open FrameMaker 10 through a .fm file.
I cannot open a .fm file from Framemaker 10.
I've tried multiple .fm files, so this isn't isolated to s sngle corrupted file.
I was using FrameMaker 10 yesterday, but it doesn't work today.
I updated Flash this morning, but have not installed any other programs.

I'm not sure which actions resolved this issue:
I went to: C:\Documents and Settings\[username]\Application Data\Adobe\FrameMaker\10
I moved all files with today's date to another folder on my desktop.
I also contunued to \WorkSpaces\Structured and moved the Structured Authoring.cfws file.
The .fm file opened with no hitches.

How to Determine Which Workspaces Are Open

We are currently doing some Git automation in which all developer work folders will get updated automatically. However, the automation script should skip a developer folder if CVI is open from that folder. For example, assume there are three folders.
c:\dev1\myproj.prj
c:\dev2\myproj.prj
c:\dev3\myproj.prj
If dev2 has myproj.prj open, the script will skip that folder. The way we tried to determine if a particular project is open is as follows:
1. Determine if CVI process is running.
2. If yes, get CVI window title.
We wrote a Win32 C++ utility for this purpose. Since the title shows the full workspace path, this information was sufficient. But recently, we noticed that if the path is too long, CVI shortens it (eg: c:\..\folder\myproj.prj). At the same time, if I hover the mouse on the title bar area, CVI shows a tool tip with the full path.
So I was wondering if there is any way I can read the tool tip string? Suggestions on approaching this in some other way are also welcome.
Solved!
Go to Solution.

You could use ActiveX automation to connect to a running instance of CVI to find out what the current project is.
Once you determine that an instannce of CVI is running, you can then call CVI_ActiveApp to connect to it (look at samples\activex\cvi\build.prj if you're not familiar with ActiveX automattion). The one caveat is that it's hard to control which instance of CVI will be used by CVI_ActiveApp, in case more than one is running. But you can always also use the CVI_AppGetCVIProcessId function to confirm that you have the right one (whatever the "right one" means, in that case).
Once you have a connection, then you can use CVI_AppGetCurrentProject.
Luis

Multiple accounts in Contacts--how to determine which account is used?

My iPhone is linked to my Gmail account and to my work Outlook Exchange account.
How can I move contacts from one to the other, and, also, select which account I'm using when I create a new contact?

I will trust your judgment on not being able to move contacts to another group once they are created.
But how can I choose which account they belong to when creating a contact?
Example:
My sister-in-law sent a text message to my wife and I, and since I didn't recognize the number, but know it's her, I used the "Create as new contact" feature in the iPhone to add her to my contacts.
Today, I notice she is in my work contacts on the Exchange server. Not where she belongs, and if I ever change jobs, I don't want to lose her record, so I wanted to select "Gmail Contacts" for her when creating the new record, but I don't see how to do it.
Please let me know if it's there somewhere and I am missing it?

Firefox will not let me open one of my yahoo e-mail accounts. can open it on internet explorer. the account is linked with another e-mail account.

I can open the account, but can't select any items to open. problem first started Friday, when the e-mail account would not stay open. Now will stay open but will not open e-mails or allow selection of tabs. contacted yahoo but they said it was a firefox issue due to the fact I can open e-mails using internet explorer.
says Yahoo!Mail, null currently.

Thank you! I did all three of those things and it works now. I was using a bookmark for the att.net Mail page like you said. I think that's probably what the problem was. It used to work fine. Now I know.

MS Office 2013 cannot open on user account but admin account can open ms office 2013

Hello
Before I have to use office 2010 proplus it not have problem for open ms office on user account after i have to upgrad to ms office 2013 version(15.0.4551.1512) i got problem cannot open ms office 2013 on user account but can open ms office 2013 on admin
account. I try to grant user account permision full control on C:\Program Files\Microsoft Office 15 but not working. Micorsoft support pro plus has remote to my pc and told me to change registry by add permision full control user account on hkey_current-User\software
then restart but not work. I have to uninstall and reinstall MS Office 2013 or repair it not working to open user account. MS Support told me to try download Office 2013 trial version to install it working to open on user account but Trail version is
15.0.4420.1017 and try to open mail on outlook it slow reponse. now this case still cannot solve. I don't know who can fix this or not. Please advices Thank you.

Hello Tony
Thank you for your reply
I checked event log not have any error for this. I click word , excell and all ms office not have any pop. I have to add user account permission full control by list below . It not working.
- C:\Program Files\Microsoft Office
- C:\Program Files\Microsoft Office 15
I had to post this on Microsoft Community . After MS Support ask my pc join network or not i told my pc join network . He told me to post this forum.
I give you more information to try something.
I have to created new account for local computer and add new account to users group after that i try to log on local pc by use new account and try to open ms office excel , word etc.. It can open.
I have to log on to domain by account user on domain it cannot open MS office but i have to add this account user to administrators groups. It can open ms office. If i change that account to users group and try to open ms office . It cannot open and
not have pop up and error.
If you need more information please let me know. Thank you

How to keep firefox from constantly downloading mavericks,which it can'open?

I tried to update to mavericks,but am unable to open the files to install. From what I have read this is probably a good thing; however now firefox keeps on downloading the files and I can't seem to make it stop. Each time I open firefox the whole process starts again..

You should actually update to mavericks, it's a good solid update and plus, your version of Mac isn't getting security updates anymore, meaning it's vulnerable to attack (despite public opinion Mac isn't invulnerable).
This isn't really a Firefox question anyway..... You install Mavericks via the App store, not through Firefox. http://www.macworld.com/article/2056564/how-to-install-mavericks-over-leopard.html

Is it possible to determine which user has opened a PDF on a network?

Hi Everyone.
We frequently have a situation where users open PDFs saved on the network with Acrobat, and then leave them open.
Then if other users need to edit the same PDF, they have no way of knowing the PDF is locked until they try to save and get this error:
"...The file may be read-only or another user may have it open... "
In this situation it would be useful to be able to interrogate the locked PDF to see which user has locked it open, and maybe to even force close the open session.
Does anyone know if any of this is possible?
Many thanks in advance.
Cheers,
Andy

It's not something that Acrobat can show. File 'locks' in Acrobat are not controlled by the application as they are in programs such as Word or InDesign - which write a lockfile to the folder - instead we rely on the server OS to flag each file. Information on who is accessing a file on a network share is only available at operating system level via the machine which hosts the share (e.g. via a net session command).

I am unable to open documents ending with .doc (rather than docx, which I can open). The error message states "[name of document]" is being used by "another user." Do you want to make a copy? Help!!!

How can I open a Word document, when I receive this error message "[name of document]" is being used by "another user." Do you want to make a copy?
(This only occurs on the documents I have saved as .doc; the ones saved as "docx" open for me. Help!

Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

Determining Which Accounts are Authorized on a Mac

I have two old Macs which I am going to sell. I understand how to deauthorize them and have done so. Or so I think. The "fly in the ointment" is that in iTunes in the Store Menu, there is still an option to "Deauthorize This Computer" option after having, as I said, reauthorized the only known account ( I have owned the machines since new and have never had any other users).
So, does the option to "Deauthorize This Computer" remain because iTunes is aware of other accounts that might still be authorized, or am I overthinking it? A point in favor of my possibly overthinking it is that there is an option remaining to "Deauthorize Audible Account" in the Advanced menu, after having done so already with the only Audible account I know about.
Thanks for any bits o' wisdom and advice!
Gary

It's simply there because you may either de-authorized it or all computers from that computer. It is not an indication that the computer is not de-authorized if, in fact, you have de-authorized it.

Trying to determine which account can open my books.

Similar Messages

Maybe you are looking for