Trying to do Disk Repair but get beeping.

I need to do a Disk Repair through the Disk Utility function off my Snow Leopard Installation disc. However, once my Macbook Pro restarts, it won't take me to the OSX installation window. Instead, I remain stuck at the startup grey Apple screen, and get 3 beeps repeatedly. These beeps have only happened when I try to open the Installation disc. It has never happened to me when I turn on my computer normally without the installation disc.
I've also noticed that my laptop will randomly freeze sometimes with a spinning cursor when I barely even have an internet window open, no other applications running. I don't know if this problem is related to the issue above.
This is a 2011 model. Don't know if these specs will help at all (total tech newb here).
Processor: 2.2 GHz Intel Core i7
Memory: 4GB 1333 MHz DDR3
Any suggestions are greatly appreciated!

1) 3 long tones, 3 short tones, 3 long tones = Firmware restoration from CD in process.
2) 3 successive tones, a 5-second pause, 3 successive tones = RAM does not pass data integrity check
Which one?

Similar Messages

I just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver.

Trying to access disk repair but.....

While trying to figure out a way to fix iTunes problems and slooooow USB download problems, I ran Disk Utility and found that there is a problem on the hard drive of my MacPro-10.4.11. It said to insert the OSX CD and reboot by holding the "C" key until the apple logo appeared then choose Disk Utility. I did that but I don't get a screen to let me choose that option. What I do get is a screen to choose my language. If I choose and go on, I get options to reinstall the OS which I don't want to do until I see if the disk can be repaired. I must be doing something wrong....or the USB ports won't work so the keyboard doesn't work when I hold the C key down. And I can't exit the setup disk or get the CD out of the drawer because the eject key on the keyboard doesn't eject it. Is there a way to open the CD/DVD drawer manually? Is my only option to reinstall the OS anyway? I did back up all my data a few days ago knowing that this issue was coming up but I still don't want to go thru all that reinstall stuff if the disk is bad.
Thanks for any suggestions you can give me.
Paula

You're welcome!
"Now to figure out why iTunes won't save the library files"
Try posting over in the iTunes for Mac Forums instead of their Windows forum.
"why the USB ports download files like molasses!"
Suggest you post over in one of the Mac Pro Forums where the Mac Pro users hang out. Sorry, I've never heard of USB downloading.

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)?

My time machine 3 TB HD was encryption enabled and it took forever. I tried reformattiing, it is online, but, get this Partition map repair failed while adjusting structures to fit current whole disk size. Any comments appreciated.

My time machine 3 TB HD was encryption enabled and it took forever. I tried reformattiing, it is online, but, get this Partition map repair failed while adjusting structures to fit current whole disk size. Any comments appreciated.

This issue has been in discussion (actively) since last August here:
https://discussions.apple.com/thread/4218970?start=0&tstart=0
After months and months of new reports, it's pretty clear that this is an Apple Mountain Lion problem and one that Apple needs to address. As one frsutrated user noted :
>>There is no consistent solution for a user. Apple has to supply it. All you can do is submit a bug report to
>> http://www.apple.com/feedback
Please, if you are encountering this problem you will save yourself a lot of wasted time and energey simple by joining me and others in asking Apple to fix this problem: Make a bug report.
Thanks!

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

I am trying to sync my 160gb, but get an error message "the ipod cannot be synced. a duplicate file name was specified. it only syncs a small % of music. any clues?

i am trying to sync my 160gb, but get an error message "the ipod cannot be synced. a duplicate file name was specified. it only syncs a small % of music. any clues?

Hmm. It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resultings numbers and we can verify what the next steps to take.
B-rock

I am trying to burn an iDVD but get message menu contains no buttons. How do I fix this issue?

I am trying to burn an iDVD, but get message menu contains no buttons. How do I fix this issue?

That essentially means that there's been no videos or slideshows added to the project as each of those items will create a button to play. What have you added to the project?
OT

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

Hello Fercho1998,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device connectivity issues:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I have Pages '08 3.0.3. Am trying to Download an Upgrade but get a mesdage saying "an eligible Keynote app was not found in the location/Applications/iWork '09. What to do?

I have successfully imported a Pages document from my (new) iPad but it will not open because it tells me that "You need a newer version of Pages to open this document".
I have Pages '08 3.0.3. Am trying to Download an Upgrade but get a message saying "an eligible Keynote application was not found in the location/Applications/iWork '09".
What to do?

Go to the App Store in your Applications folder, not in a browser, and search for 'Pages':
Click on the price to buy immediately (there is no 'basket') - the credit card you have registered with iTunes will be charged. Or click on the icon for an information page:
Again, click on the price to buy immediately - note that you get no 'are you sure', the purchase is immediate and not cancellable.

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. What do I do now?

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?

I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is.

HT201210 I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found. How can I resolve this?

I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found. How can I resolve this?

iOS: Unable to update or restore

I have tried to implement jasper report but getting exceptions at run time

I have tried to implement jasper report but getting exceptions at run time and I couldn't get the reason of these exceptions. please give me idea to solve this problem.
I am using following jar files for this :
commons-beanutils-1.6.1.jar
commons-digester-1.7.jar
commons-logging.jar
jasperreports-1.2.0.jar
code is as follows:-
(1) xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE jasperReport
PUBLIC "-//JasperReports//DTD Report Design//EN"
"http://jasperreports.sourceforge.net/dtds/jasperreport.dtd">
<jasperReport name="Simple_Report">
<detail>
<band height="20">
<staticText>
<reportElement x="180" y="0" width="200" height="20"/>
<text><![CDATA[Hello World!]]></text>
</staticText>
</band>
</detail>
</jasperReport>
(2.) java file
import net.sf.jasperreports.engine.*;
import net.sf.jasperreports.engine.xml.*;
import org.xml.sax.*;
import org.apache.commons.digester.Digester;
import org.apache.commons.digester.RuleSetBase;
import java.util.*;
public class JasperReportsIntro
public static void main(String[] args)
JasperReport jasperReport;
JasperPrint jasperPrint;
try
jasperReport = JasperCompileManager.compileReport(
"jasperreports_demo.jrxml");
jasperPrint = JasperFillManager.fillReport(
jasperReport, new HashMap(), new JREmptyDataSource());
// JasperExportManager.exportReportToPdfFile(
// jasperPrint, "jasperReports/simple_report.pdf");
catch (JRException e)
e.printStackTrace();
I am getting exceptions like:
net.sf.jasperreports.engine.JRException: Errors were encountered when compiling report expressions class file:
/home/navneet/Simple_Report_1143636234024_954843.java:4: package net.sf.jasperreports.engine does not exist
import net.sf.jasperreports.engine.*;
^
/home/navneet/Simple_Report_1143636234024_954843.java:5: package net.sf.jasperreports.engine.fill does not exist
import net.sf.jasperreports.engine.fill.*;
^
/home/navneet/Simple_Report_1143636234024_954843.java:18: cannot find symbol
symbol: class JREvaluator
public class Simple_Report_1143636234024_954843 extends JREvaluator
^
/home/navneet/Simple_Report_1143636234024_954843.java:25: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_RESOURCE_BUNDLE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:26: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_CONNECTION = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:27: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_PARAMETERS_MAP = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:28: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_IS_IGNORE_PAGINATION = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:29: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_CLASS_LOADER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:30: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_VIRTUALIZER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:31: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_LOCALE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:32: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_DATA_SOURCE = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:33: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_SCRIPTLET = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:34: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
private JRFillParameter parameter_REPORT_MAX_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:35: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_PAGE_NUMBER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:36: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_COLUMN_NUMBER = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:37: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_REPORT_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:38: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_PAGE_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:39: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
private JRFillVariable variable_COLUMN_COUNT = null;
^
/home/navneet/Simple_Report_1143636234024_954843.java:62: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_RESOURCE_BUNDLE = (JRFillParameter)pm.get("REPORT_RESOURCE_BUNDLE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:63: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_CONNECTION = (JRFillParameter)pm.get("REPORT_CONNECTION");
^
/home/navneet/Simple_Report_1143636234024_954843.java:64: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_PARAMETERS_MAP = (JRFillParameter)pm.get("REPORT_PARAMETERS_MAP");
^
/home/navneet/Simple_Report_1143636234024_954843.java:65: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_IS_IGNORE_PAGINATION = (JRFillParameter)pm.get("IS_IGNORE_PAGINATION");
^
/home/navneet/Simple_Report_1143636234024_954843.java:66: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_CLASS_LOADER = (JRFillParameter)pm.get("REPORT_CLASS_LOADER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:67: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_VIRTUALIZER = (JRFillParameter)pm.get("REPORT_VIRTUALIZER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:68: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_LOCALE = (JRFillParameter)pm.get("REPORT_LOCALE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:69: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_DATA_SOURCE = (JRFillParameter)pm.get("REPORT_DATA_SOURCE");
^
/home/navneet/Simple_Report_1143636234024_954843.java:70: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_SCRIPTLET = (JRFillParameter)pm.get("REPORT_SCRIPTLET");
^
/home/navneet/Simple_Report_1143636234024_954843.java:71: cannot find symbol
symbol : class JRFillParameter
location: class Simple_Report_1143636234024_954843
parameter_REPORT_MAX_COUNT = (JRFillParameter)pm.get("REPORT_MAX_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:88: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_PAGE_NUMBER = (JRFillVariable)vm.get("PAGE_NUMBER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:89: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_COLUMN_NUMBER = (JRFillVariable)vm.get("COLUMN_NUMBER");
^
/home/navneet/Simple_Report_1143636234024_954843.java:90: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_REPORT_COUNT = (JRFillVariable)vm.get("REPORT_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:91: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_PAGE_COUNT = (JRFillVariable)vm.get("PAGE_COUNT");
^
/home/navneet/Simple_Report_1143636234024_954843.java:92: cannot find symbol
symbol : class JRFillVariable
location: class Simple_Report_1143636234024_954843
variable_COLUMN_COUNT = (JRFillVariable)vm.get("COLUMN_COUNT");
^
33 errors
at net.sf.jasperreports.engine.design.JRAbstractCompiler.compileReport(JRAbstractCompiler.java:193)
at net.sf.jasperreports.engine.design.JRDefaultCompiler.compileReport(JRDefaultCompiler.java:131)
at net.sf.jasperreports.engine.JasperCompileManager.compileReport(JasperCompileManager.java:211)
at net.sf.jasperreports.engine.JasperCompileManager.compileReport(JasperCompileManager.java:144)
at com.appnetix.app.portal.financials.reports.RoyaltyReportAction.execute(RoyaltyReportAction.java:68)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at com.appnetix.app.control.web.AppnetixRequestProcessor.process(AppnetixRequestProcessor.java:149)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at com.appnetix.app.control.web.AppnetixControllerServlet.doPost(AppnetixControllerServlet.java:262)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)

You have no permission to create a report. You have to create a permisson-entry into your server.policy. Then it would be work.

Trying to activtae Iphone 4 but getting a message saying that already activated

HI
I'm trying to activtae Iphone 4 but getting a message saying that already activated on October 4th, I received the phone on October 20th. Any idea wht can be the issue ?

Hello madvish,
Congratulations on your new iPhone! I recommend the following steps when encountering an activation error:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
You can find the full article here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Thank you for using Apple Support Communities.
Best,
Sheila M.

Trying to install Photoshop CC but get following message, download error. press retry to try again or contact customer support.(49)

Trying to install Photoshop CC but get following message, download error. press retry to try again or contact customer support.(49)

disable running antivirus/firewall programs.

Trying to do Disk Repair but get beeping.

Similar Messages

Maybe you are looking for