Trying to do initial setup but it is only speaking Chinese.

Can't get past the "slide to configure" step cuz I don't know what the buttons are saying.

I Have the exact same problem!!! Did u find out the cause? Please let me know!

Similar Messages

  • I am trying to download CreativeCloud Setup but am receiving Error code 213. How do I fix this so I can download Adobe Pro XI?

    I am trying to download CreativeCloud Setup but am receiving Error code 213. How do I fix this so I can download Adobe Pro XI?

    Hi Lynn,
    You I'd try running the download again with your anti-virus software disabled using a newly created admin account.
    - Dave

  • Have base station and added extender for downstairrs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. What's wrong? Thanks!!

    Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!

    Power off both the AirPort Extreme and AirPort Express
    Wait a minute
    Power up the AirPort Extreme and let it run for a few minutes
    Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
    The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate.

  • I recently tried to import 2 CDs but on one, only the first 4 songs imported and on the second, only the first 6 imported.  The CDs work fine in a CD player.  Any suggestions?

    I recently tried to import 2 CDs but on one, only the first 4 songs imported and on the other, only the first 6 songs imported.  The CDs work fine in a CD player.  Any suggestions?

    Rip the CDs with another program on your computer, and add the resulting MP3s to your iTunes library.  (If you use Windows Media Player for this purpose, make sure the Rip Setting is on MP3, or else it will default to a useless format known as WMA.)

  • Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

    I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...
    Also see your other post >  After updating iOS iPod is showing only iTunes log with USB Cable..

  • My new iPad2 synched OK on initial setup but I didn't really want all the photos in iPhoto transferred so on  later synch I tried limiting the sych to certain albums only to find that only a fraction of the albums now on the iPad. I tried synching again.

    My new iPad2 set up OK with all the photos in my iPhoto transferring . On a later synch I tried limiting the transfer to only certain albums. After that I find only a fraction of the desired albums transferred. I tried synching again without any restrictions but get the same limited number of photos and albums. I think I've seen the solution to this fault somewhere - something to do with deleting the iPhoto cache but can't find it.

    Update: I was unsuccessful on my attempt to delete the iPhoto Cache folder because I didn't follow the directions exactly. There seems to be more than one folder with an identical name. Finally succeeded in getting all my photos back on the iPad2.
    If one desires to change the selection of photos snc'd, however, it apears that you must change the selecion from the iTunes screen while the iPad is plugged in and the select "Apply". Unfortunate, the sync starts immediately when you plug the iPad in and it doesn't seem to smart to stop the sync. It appears you have to make a change in iTunes while syncing. Let it complete. Detach the iPad. Go back and delete the iPhoto cache ad directed. Then the next time you sync presumably the new sync restrictions will apply. I didn't want to risk stopping the sync that started automatically to change the sync options and then direct it to sync again but that might work. Too bad we don't have more control over the starting of syn when the iPad is attached. Maybe we actually do but I haven't noticed it.

  • HT201269 I'm already past the initial setup but...

    didn't have access to my iCloud password to reload my backup files from iCloud. How do I do it? The instructions here say "When prompted" restore from iCloud backup--but I don't know how to get to that screen again...
    Help! Need all my apps....contacts...etc...

    Go to Settings - Reset - Reset all content and data (second option)
    During configuration, you'll be asked to restore from an iCloud backup. this is the only way.
    Make sure this iPhone is also up-to-date, because if they old Phone was up-to-date and this one isn't, that might cause issues
    Good luck

  • I'm trying to play a movie but my iPad only plays for a few seconds at a time...how do I change this

    I'M trying to view a movie on my iPad but it wont play but a few seconds at a time
    How do I make it play the movie without stopping all the time

    Movie from where?
    Is it downloaded on the device or streaming over the Internet?

  • HT1926 Have new generation 6 nano.  Was able to install version 8 of itunes but error reads that this version with Vista needs newer version.  Have tried to install 10.1 but it installs only part way then installs itself part way through.  Help.

    Has anyone had problems downloading itunes 10.1 with the generation 6 nano?  I have
    Windows Vista on my computer.  Was able to install version 8.1 but nano needs newest version. Help anyone???

    The solution Lijoesat posted above worked for me!
    First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
    I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
    I tried to empty the trash bin after but many files was locked and Garageband would still not install.
    I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
    The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

  • I downloaded a song and i tried to listen to it but it will only play the first half of the song and then skip to the next song.

    I downloaded several songs successfully to my ipod nano (5) but this particular song when i tried to listen to it would play for the first half and then skip to the next song in the playlist like the ipod thought the song was over.

    Did you download from itunes? If not, some websites save the song too quickly or in a format that glitches.
    I've had this problem before with both itunes and non itunes purchases, try deleting it and re-downloading.

  • HT4623 upgraded my iphone 3GS to higher iOS but unfortunately my phone has reset factory setting and now i can't use it anymore... tried to connect to iTunes but it would only say: WE ARE SORRY, WE ARE NOT ABLE TO CONTINUE YOUR ACTIVATION THIS TIME...

    tried to upgrade my iPhone 3GS to a higher iOS but unfortunately it had reset factory setting... now i can't use my phone anymore... tried also to connect to iTunes as instructed but only appears: WE ARE SORRY, WE CANNOT CONTINUE YOUR ACTIVATION AT THIS TIME... WHAT SHOULD I DO? THANK YOU...

    No, you do not need to nor should you jailbreak your iPhone.
    If you jailbreak your iPhone, you void any remaining warranty and lose
    all support from Apple including this forum.
    4 possible causes to activation server unavailable message:
    1] activation server is actually unavailable. Happens very rarely and
    does not last long on those rare occasions. Solution is to try again.
    2] your firewall/internet security software/antivirus are preventing connection
    to the activation server. Solution is to temporarily turn off your firewall/internet
    security software/antivirun until you have activated your iPhone.
    3] your iPhone has been jailbroken or otherwise hacked/modified.
    4] the computer you are using to activate the iPhone has been used to
    jailbreak an iOS device.
    For causes 3] & 4] you are on your own as Terms of Use for this forum prohibit
    discussion of jailbroken/modified iOS devices. Google may provide some direction.
    Be advised that jailbreaking/hacking your iPhone may prevent the iPhone from
    being able to be activated.

  • Hp x64 printer initial setup

    Am trying to do initial SETUP phase of connecting a recently purchased HP Deskjet 2540 all-in-one-series printer. I have reached the stage , where, having loaded the paper, I am waiting for the automatic printout of the alignment page and nothing is happening! The power light is on; the wireless indicator is flashing; all other indicators are off! I heard the cartrigde carrier moving after closing the access panel. My PC indicates that my wireless connection is good, although I do not think this is relevant at this stage? No errors are showing; the wireless icon is showing but no signal strenght bars on the control panel display!  Any suggestions to fix it would be welcome. Donu. 

    Hi @DONU , Sunshyn here again.
    I see you are stuck waiting for the alignment process to complete. At this point, I suggest leaving the printer on and unplugging the power cable, this will reset the printer, it's called a Hard reset. After a minute, go ahead and plug it back in and see what happens.
    You should be able to go ahead and install the software, and you will be prompted to configure the printer during this process. After the software is installed and the printer is configured, try printing from the computer and let me know the outcome.
    Thanks, I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • During initial setup of mac pro, used pc to mac transfer, after transfer mac requires new password to enter account but will not accpt password

    During the initial setup of mac book pro, I did the pc to mac transfer. After transfer was complete, mac had two user accounts aspen pc machine? and dell. Upon trying to access either, the mac says I have to enter new password to enter. It will not accept new password. What do I do?

    Well....I bit the bullet and called Apple tech support this morning and agreed to pay my $49 for the tech support. I ended up talking to a Boot Camp specialist. In the end his position was that "they didn't support Windows" and my particular problem was a "Windows problem". I countered with the fact that they advertise that one of their selling points was that Windows could run on an Intel Mac and that I ought to at least be able to install Windows. They said that most people were able to install Windows with no problems. I agreed, but told them that, after searching the Internet, I had read numerous posts from folks that had the same problem and that Apple really should address it. They were very polite and even agreed not to charge me the $49, but their final position was that it was a "Windows problem."
    I guess that at this point I'll try to return the Windows disk to Amazon and see if they'll give me a replacement.

  • I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

    I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

    You need to set the option to create a mobile account using the Directory Utility app. 

  • I am trying to logon to icloud for the 1st time on my pc, everything is setup, but it comes up with 'you cant sign in because of server error'

    I am trying to logon to icloud for the 1st time on my pc, everything is setup, but it comes up with 'you cant sign in because of server error'

    Hi tracey,
    It sounds like you are having issues with connecting to the iCloud servers, a frustrating situation to be sure. I would suggest troubleshooting using the steps in this article -
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Thanks for using Apple Support Communities.
    Best,
    Brett L

Maybe you are looking for