Trying to dowload older product. need help!

I have CS2 and LR3 and trying to download them to my new iMac (that does not have a cd reader included) how am I supposed to get them onto my computer? when I enter the serial numbers its says they are not valid. can I contact adobe directly? thank you!

http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4927&fileID=4588
You can download from here.

Similar Messages

  • I'm trying to install elements 12 need help?

    I'm trying to install elements 12 need help?

    What problem are you encountering in trying to install Elements 12?

  • Trying to activate cs6 and need help please

    i just spent an hour with this dude in india trying to activate cs6 production premium academic
    i am trying to 'offline' activate my editing rig because it's too heavy to move to internet
    also i installed the trial version of cs6 production premium
    and tried to activate that with the academic serial numbers (because it installed correctly and the updates, too)
    i got the REQUEST code:  when you type it into the activation page do you use the spacebar between each set of 4 characters?
                                              are the 0's upper case letter o's or are they zeros?
    we tried all sorts of combinations and nothing works so i'm supposed to wait 4-5 hours  until licensing/activation people get into the office...
    does anyone have any help or advice on this please?
    thanks again,
    j

    >editing rig because it's too heavy to move to internet
    Since there have been bug fix updates, you will need to get the update files to your computer
    Either by using a different computer and a USB flash drive, or by buying a LONG network cable
    All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

  • Older product needs to be replaced with new product?

    Hi all,
    I have a requirement
    older product code(material/sku)     new material /sku
    abc                                                     xyz
    10                                                        20                                      sales qty
    product code                        qty (before )                      qty (after)
    def                                       20                                        30
    required changes
    1. if older product is abc then it should be taken as xyz
    2. if older product is abc then it should be moved to def product code too.
    How can it be done ?
    Thanks

    thanks

  • Trying to delete "submit" button. Tried unsucessfully 5 times. Need help and want to start over.

    I created a pdf that I just wanted people to be able to fill in, download, print out and then mail to me.  I followed the instructions from a previous acrobat expert who replied to me yesterday and that did not work.  Now, I've tried this 5 times and the system has blocked me out unless I pay for your advanced system which is $143.  Please help
    Re: Want to delete the "submit" link on a pdf
    created by Lucia Lao in FormsCentral - View the full discussion
    Hi,
    I believe this is a form that you created with FormsCentral and then you downloaded/saved as PDF via the "Save Submission-Enabled PDF" button via the Distribute Tab.
    Please select via FormsCentral app main menu:
    - File -> Save As PDF Form... and then
    - when you get the dialog "Would you like your PDF form to collect responses online in the "View Responses" tab?" select "Don't Collect Responses" button.
    This will save the PDF form without the Submit button/link.
    Thanks,
    Lucia
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5218029#5218029
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [http://forums.adobe.com/message/5218029#5218029]
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/5218029#5218029]. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in FormsCentral by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

    The instructions Lucia gave you were correct. It seems you have a Basic trial account (5 forms). You can just delete the forms you are not using so you can create more. Can you explain in more detail how those instructions above didn't work? I think there is some confusion so any details you can provide will help clear it up.
    Randy

  • Trying to form complex query - need help

    I have a fairly complex query that I need to join the results of to show actual and goal by day. The actuals are an aggregation of records that get put in every day, while the targets are a single entry in range format indicating an active range for which the target applies. I'm working on a query that will put things together by month and I'm running into a snag. Can someone please point out where appropriate naming needs to go to get this to come together?
    This one works:
    (select DATE_INDEX, SUM(LDS) as TTLLDS, SUM(TONS) as TTLTONS from
        (select DATE_INDEX, VEH_LOC, SUM(LDS) as LDS, SUM(WT) as TONS from
           (select c.DATE_INDEX, c.VEH_LOC, COUNT(j.LOAD_JOB_ID) as LDS,
                 CASE WHEN SUM(w.SPOT_WEIGHT) = 0 THEN SUM(j.MAN_SPOT_WT)
                      ELSE SUM(w.SPOT_WEIGHT)
                  END as WT
              from TC c, TC_LOAD_JOBS j, LOAD_RATES r, SPOT_WEIGHTS w
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX = w.DATE_INDEX and j.LOAD_RATE_ID = w.LOAD_RATE_ID
               and c.VEH_LOC in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
             group by c.DATE_INDEX, c.VEH_LOC
            union
            select c.DATE_INDEX, c.VEH_LOC, COUNT(j.JOB_ID) as LDS,
                 DECODE(SUM(j.AVG_SPOT_WEIGHT),0,SUM(r.BID_TONS),SUM(j.AVG_SPOT_WEIGHT)) as WT
              from TC_3RDPARTY c, TC_3RDPARTY_JOBS j, LOAD_RATES r
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
               and j.FACTORY_ID in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
             group by c.DATE_INDEX, c.VEH_LOC)
          group by DATE_INDEX, VEH_LOC)
      group by DATE_INDEX)Now I need to add in the following query:
    select (u.MACH_TPH_D+u.MACH_TPH_N)/2 as MTPH_TGT, (u.LABOR_TPH_D+u.LABOR_TPH_N)/2 as LTPH_TGT
         from UTIL_TARGET_LOADERS u
        where u.ORG_ID in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)The join needs to be based on VEH_LOC and DAY in the form:
       ... WHERE u.ORG_ID = x.VEH_LOC
              AND x.DATE_INDEX between u.START_DATE and NVL(u.END_DATE,sysdate)I had one that worked just fine when only one entity was involved; the complication arises in that this is a division-level report so I have to individually resolve the subordinates and their goals before I can aggregate. This is one of two queries I need to tie together using a WITH clause so I can pivot the whole thing and present it in month-by-month fashion. When I try to tie it together like the query below, I get: invalid relational operator.
    select ttls.DATE_INDEX, SUM(ttls.LDS) as TTLLDS, SUM(ttls.TONS) as TTLTONS, u.TARGET_LTPH, u.TARGET_MTPH
      from UTIL_TARGET_LOADERS u,
        (select DATE_INDEX, VEH_LOC, SUM(LDS) as LDS, SUM(WT) as TONS from
           (select c.DATE_INDEX, c.VEH_LOC, COUNT(j.LOAD_JOB_ID) as LDS,
                 CASE WHEN SUM(w.SPOT_WEIGHT) = 0 THEN SUM(j.MAN_SPOT_WT)
                      ELSE SUM(w.SPOT_WEIGHT)
                  END as WT
              from TC c, TC_LOAD_JOBS j, LOAD_RATES r, SPOT_WEIGHTS w
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX = w.DATE_INDEX and j.LOAD_RATE_ID = w.LOAD_RATE_ID
               and c.VEH_LOC in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
             group by c.DATE_INDEX, c.VEH_LOC
            union
            select c.DATE_INDEX, c.VEH_LOC, COUNT(j.JOB_ID) as LDS,
                 DECODE(SUM(j.AVG_SPOT_WEIGHT),0,SUM(r.BID_TONS),SUM(j.AVG_SPOT_WEIGHT)) as WT
              from TC_3RDPARTY c, TC_3RDPARTY_JOBS j, LOAD_RATES r
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
               and j.FACTORY_ID in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
             group by c.DATE_INDEX, c.VEH_LOC)
          group by DATE_INDEX, VEH_LOC) ttls
        where ttls.DATE_INDEX beween u.START_DATE and NVL(u.END_DATE,sysdate)
          and ttls.VEH_LOC = u.ORG_ID
      group by ttls.DATE_INDEXI know this is a nested mess, as it has to grab the production from two tables for a range of VEH_LOC values and sum and aggregate by day and VEH_LOC, then I have to try and match that to the targets based on VEH_LOC and day. My final query is to aggregate the whole mess of sums and averages by month.
    I'd appreciate it if someone can point me in the right direction.

    Figured it out.
    select ttl.DATE_INDEX, SUM(ttl.LDS) as TTLLDS, SUM(ttl.TONS) as TTLTONS,
         AVG((u.MACH_TPH_D+u.MACH_TPH_N)/2) as MTPH_TGT,
         AVG((u.LABOR_TPH_D+u.LABOR_TPH_N)/2) as LTPH_TGT
      from
        (select DATE_INDEX, VEH_LOC, SUM(LDS) as LDS, SUM(WT) as TONS from
           (select c.DATE_INDEX, c.VEH_LOC, COUNT(j.LOAD_JOB_ID) as LDS,
                 CASE WHEN SUM(w.SPOT_WEIGHT) = 0 THEN SUM(j.MAN_SPOT_WT)
                      ELSE SUM(w.SPOT_WEIGHT)
                  END as WT
              from TC c, TC_LOAD_JOBS j, LOAD_RATES r, SPOT_WEIGHTS w
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX = w.DATE_INDEX and j.LOAD_RATE_ID = w.LOAD_RATE_ID
               and c.VEH_LOC in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
             group by c.DATE_INDEX, c.VEH_LOC
            union
            select c.DATE_INDEX, c.VEH_LOC, COUNT(j.JOB_ID) as LDS,
                 DECODE(SUM(j.AVG_SPOT_WEIGHT),0,SUM(r.BID_TONS),SUM(j.AVG_SPOT_WEIGHT)) as WT
              from TC_3RDPARTY c, TC_3RDPARTY_JOBS j, LOAD_RATES r
             where c.TC_ID = j.TC_ID and j.LOAD_RATE_ID = r.LOAD_RATE_ID
               and c.DATE_INDEX between to_date('08/01/2010','MM/DD/YYYY') and to_date('07/31/2011','MM/DD/YYYY')
               and j.FACTORY_ID in (select ORG_ID from ORG_ENTITIES where MNG_ORG_ID = 200)
             group by c.DATE_INDEX, c.VEH_LOC)
          group by DATE_INDEX, VEH_LOC) ttl, UTIL_TARGET_LOADERS u
      where u.ORG_ID = ttl.VEH_LOC
        and ttl.DATE_INDEX between u.START_DATE and NVL(U.END_DATE,sysdate)
      group by ttl.DATE_INDEX, (u.LABOR_TPH_D+u.LABOR_TPH_N)/2

  • Trying to boot from usb need help ASAP

    Hi everyone i have a compaq presario CQ 40-330 TU laptop. Its dvd drive has failed few month ago and as i did not use dvd drive much so i did not replaced it instead i made a bootable windows 7 repair usb with this following procedure http://www.intowindows.com/how-to-repair-windows-7​-from-usb-flash-drive-repair-without-installation-​... Today i need to boot my pc using the usb drive but to my surpise it failed to boot. So i need your help ASAP because my laptop is now unbootable and i need it fixed quick. What should i do?? When i entered the bios i found out this information Boot option CD- ROM boot < disabled > Floppy Boot < Enabled > Internal Network Adapter Boot < Disabled > Boot order USB floppy ! Internal CD/DVD ROM drive. Notebook Hard drive ! USB CD/DVD ROM drive USB Diskette on key / USB Hard drive ! Network adapter. Please help.....

    Hi. I think I have pretty similar problem on notebook HP Compaq NX6110  with crashed CD-ROM.
    I've prepared the bootable USB drive using this procedure (with a small modification because I want to intall Windows XP):
    http://bizsupport1.austin.hp.com/bizsupport/TechSu​pport/... 
    Anyway, in bios setup I change the boot device options so that the "USB hard drive" is set as "the first" and USB Superdrive (slt) is set to the second... I save the settings etc. I restart the computer and in the blue boot menu that appears I can only choose Notebook harddrive and Optical drive (no USB).
    Any ideas? Is it possible that this notebook does not support USB booting thought there is an option is BIOS?

  • Trying to fix an error - need help

    Hello everyone
    I'm having a problem while I try to activate the app
    when I try a error shows me on the screen saying "The applecation was unable to start correctly (0xc0150004). Click OK to close the application"
    The download was fine and succesful.
    can you please help me fix this error?
    thank you.

    The system requirements for AE CC 2014 specifically state that it needs Service Pack 1 if it is to run on Windows 7.
    You will need to get that sorted out before you will be able to run After Effects. Looks like something is wrong with your Windows OS.

  • HT1491 OLDER USER NEEDS HELP

    My IPOD Touch 4 is 2009 and software is up-to-date.  I purchased IBIRDS Canada but it won't download.  ERROR - need newer software version.  I checked before purchasing and it said OK for IPOD touch 4.  Can anyone help with this?

    If you purchased your iPod touch in 2009, you do not have a fourth-generation iPod touch. Those were released in September of 2010. You can determine the model of iPod you do have here:
    http://support.apple.com/kb/HT1353
    If you actually have a second-generation iPod touch, the last version of iOS it can run is iOS 4.2.1. iBirds Canada requires iOS 4.3 or later and will therefore not run on a 2nd-generation iPod touch.
    Regards.

  • Leopard Wireless Dropouts - Tried all reccomended forum fixes - need help

    I need to add my name to the list of people who are having genuine problems with the wireless networking in leopard. I am the primary systems admin for a school, and responsible for maintaining an install base of over 250 intel macbooks. Since upgrading to leopard we have had many many wireless issues.
    We have 3com wx1200 wireless controllers running numerous 3com 3750 and 2750 access points. The security is WPA2 with PSK authentication (though I can shut the security right off without any improvements in reliability). Macbooks will consistantly drop the connection to the wireless requiring a "turn airport off" and "turn airport on" to re-establish the connection, which works about half of the time.... Many times the machines need to be rebooted. It seems as though our original core duo macbooks are the most affected, though the problem exists on all our macbooks running leopard. (currently 10.5.5) *Rebuilding any of the affected laptops with tiger instantly clears up any problems*. No tiger machines, and no windows machines have any issues with the connection drops. I've tried every documented suggested fix on the numerous other threads here where people are having this exact same issue. I've eliminated all the variables and my problem seems to be leopard alone, or perhaps leopard in conjuction with this particular wireless infrastructure. Regardless, it's time that this problem is officially acknowledged and that some strides are made to remedy it. I'd be very happy and available to work with apple engineers on this problem. I can provide whatever logs or dumps you need.
    This is one of two unacknowledged widespread issues that is shooting us in the foot. We are also plagued by the problem where faulty parental controls partially restrict access to secure sites (in our case google docs). This bug is also all over the forums and goes unresolved.
    Any ideas or suggestions (other than permissions repairs, keychain repairs, and upgrading router firmware - it's all been done!) would be most appreciated!
    Cheers,
    Neil

    These are actually user to user forums - a place for fellow Mac users to get together and swap troubleshooting ideas.
    However Apple Engineering does not read these boards on an official basis, so we can complain about something all day but until it makes its way through AppleCare to engineering it won't get on the engineers' work queues.
    The other way to file a bug is to register for a free Apple Developer Connection Online account, which will then allow you to file bugs via the Apple Bug Reporter.

  • Older lady needs help with Mac

    Some how I have messed up the size of everything on my screen I is way to large how do I get it make it normal size
    Every thing is streched out.

    Hi,
    I think the prblem is in the display resolution
    Please try this http://support.apple.com/kb/HT3142
    I hope this helps
    Cheers

  • Getting error msg when trying to run 'weblogic.DDConverter', need help

    I'm getting the following error when I try to run the 'weblogic.DDConverter' program to convert a deployment descriptor for an EAR file currently running under WLS 8.1 (that needs to be migrated to WLS 9.2):
    [DDConverter] START Converting EAR CDMS.ear
    Exception in thread "main" javax.xml.stream.FactoryConfigurationError: Provider
    javax.xml.stream.XMLInputFactory could not be instantiated: java.lang.Instantiat
    ionException
    at javax.xml.stream.XMLInputFactory.newInstance(Unknown Source)
    at weblogic.application.descriptor.BasicMunger2.<clinit>(BasicMunger2.ja
    va:76)
    at weblogic.application.ApplicationDescriptor$MyApplicationDescriptor.cr
    eateXMLStreamReader(ApplicationDescriptor.java:433)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescr
    iptorBean(AbstractDescriptorLoader2.java:369)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
    torBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
    torBean(AbstractDescriptorLoader2.java:729)
    at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(A
    pplicationDescriptor.java:277)
    at weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.j
    ava:66)
    at weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:1
    57)
    at weblogic.utils.compiler.Tool.run(Tool.java:158)
    at weblogic.utils.compiler.Tool.run(Tool.java:115)
    at weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177)
    at weblogic.DDConverter.main(DDConverter.java:10)
    Any ideas as to how to resolve this?
    Edited by aroc725 at 09/25/2007 1:19 PM

    Those slashes in the first line of the error message suggest to me that maybe you referred to a class incorrectly in your source code.

  • HT201363 Hi, im am traing to get my questions reset because i forgot them but i lock my ID so I email to reset but the emails dosent come or sent i have been trying since yesterday please i need help so i can use my appstore card

    Hello?

    Reset Security Questions
    http://support.apple.com/kb/HT5312
    If you can't solve problem, call Apple to help reset your Security Question.
    http://support.apple.com/kb/HT5699

  • IPhone locked itself. Deleted all my data. Trying to reload iCloud. Need help

    Lent my friend my phone Saturday night. He entered in my passcode too may times incorrect. The iPhone deleted all of my informaiton. When I tried to load my iCloud now nothing is working for me.
    I enter in my icloud email and password and it is not bringing back all my defaults.

    tonefox wrote:
    I would suggest a serious discussion with your son.
    that is great advice.

  • HT1338 I have a Power Mac G5 running 10.4 and am trying to upgrade OS.  Need Help.

    I have a Power Mac G5 with an OS 10.4; what upgraces are available?

    Leopard 10.5.8 is the last operating system a PowerPC Mac can be upgraded to.
    Everything else newer requires Intel.
    The DVD for Leopard are getting expensive since Aple has stopped producing them.
    Allan

Maybe you are looking for