Trying to download Archive Utility - or Unarchive utility
I'm in the apple store.
When I type in "Download Archive Utility" - Im taken directly to "Dashboard Widgets I-Phone News"
I am trying to understand how that makes sense. ?
Is the Archive utility being sent to my i-phone for some reason ?
Do it through iTunes on your computer. See 2nd section of: http://support.apple.com/kb/HT4623
Similar Messages
-
I have windows xp. I 'm trying to download the airPort utility. how can I do this? It is required for AirPort base station right?
Downloading the right file for XP? Check to make sure that you are running XP SP3.
AirPort Utility 5.5.3 for Windows
AirPort Utility is required if you need to set up or change the settings on an Apple AirPort router. It is not required if you are simply connecting to the wireless network from a PC. -
when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?
I assume you have tried everything here?
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
It doesn't mention 1442, but the same troubleshooting applies.
It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
Lastly, try restoring the iPod on another PC or Mac running iTunes.
If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
B-rock -
Archive and Install/Disc Utility issues -
I'm currently spending a summer abroad in South America, and have had issues with my Macbook Pro (early 2011 version) no longer starting up after some virus experiences last week. The computer hangs itself during loading on the white screen w/ grey apple and the spinning dial. In contacts with Apple Care as well as some Mac-saavy friends, the following situations have been tried:
Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself.
Opening in single user mode - I run the recommended sbin/fsck -fy command to clean up the hard drive. It comes back after having checked 6-7 parts, saying that the MacHD is in good shape, with a message following saying that something had been "modified" (forgive me for not remembering the correct verbage at present). I then run the same command again, resulting in a message that the HD is clean and without error. I then "reboot" and remain hung on the white screen w/ grey apple.
Opening in verbose mode - I reach the following lines of text, and then there is no further progress:
enable
IONetworkController::enable
createMediumTables
enable end
MacAuthEvent en0 Auth result for: 00:23:cd:1e:f2:c4 No Ack
same line as above saying "Auth timed out" at the end
Command+option+r+p - shock two or three times, (three startup chimes) and computer continues to hang itself in the normal spot.
- So, at this point I took the advice of Apple Care and a few other friends, and tracked down a "retail copy" of Mac OSX (10.6.3) in order to try to do an Archive and Install or any sort of Disc Utility via the startup disc.
Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen.
Holding "option" during the startup gives me the option of loading from the HD, or the disc. Selecting the disc proceeds to whirr the cd drive, take me to the white loading screen with the grey apple, and... you guessed it... leaves the CPU hung.
My question is then, is my Macbook Pro unable to read this disc and execute Archive and Install/Disc Utility for hardware reasons as per the virus attack, or is the disc not compatible with my version of OSX (which I have since confirmed through my wife to be 10.6.6)?
Different sources have told me different things. The local AASP in Uruguay sold me what they professed to be the "latest" version of OSX - the 10.6.3, what's more for $55 dollars instead of the lower cost as available in the states (between $15-$30), so I am reluctant to go back to them for advice when they seem more inclined to cash in on my inexperience (Mac owner of less than a month) than actually fixing my issue. Apple Care told me that a standard "retail disc" should work, but I am assuming now that they believe I can snag the same version as initially came with my Macbook Pro. Should I be looking to have my wife mail my original OSX install DVDs down here to resolve this problem? Should 10.6.3-retail be working and is not for reasons I haven't identified? I have since done some online research and found mentions that doing any sort of HD partitioning or OSX reinstalls can only be accomplished by utilizing a disc of an equal or more recent version of the OSX (examples that 10.4 can't work on a notebook preinstalled with 10.5, etc). Does this translate to 10.6.3 not being able to function for my 10.6.6 MBP?
Any insight or thoughts would be much appreciated, as essentially all of my schoolwork and assignments are now trapped on an inaccessible HD. Thank you for your time.
- JosephI tried adding in a bunch of information about what your troubleshooting steps meant, but the server went into maintenance while I did. So, here it is again:
"Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself."
This is FSCK running, and gives you an indication of it's progress.
"MacAuthEvent en0 Auth result for: 00:23:cd:1e:f2:c4 No Ack"
This is either a failed DHCP request or ARP request.
"Command+option+r+p"
Command+Option+P+R - Resets PRAM. That's why p+r.
"Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen."
This problem indicates that the disc is too old to boot your system. The reason for why this disc cannot boot is because it doesn't contain the necessary drivers for your model MacBook Pro. My mom and brother have similar models, and my brother had similar issues while in Japan. He went and got an install disc as well, which failed, I ended up stepping him through so that it would boot in Safe Mode, and then got it working in Normal Mode remotely.
FYI: Sophos has a free Mac Antivirus program, that is very processing friendly, and will scan in the background. You may wish to consider it as an alternative to Avast! if it continues giving you problems. Though I suspect it may be coincidence that your computer had problems shortly after Avast! cleaned up files. Let me know how it goes. You may wish to open up Disk Utility and check your S.M.A.R.T. Status. You want to make sure it says "Verified" If it doesn't say "Verified" then you have a problem.
-Phill -
Drives stopped mounting with FW800, but FW400 is OK. Worked OK before, but won't now. Tried new cables, zapping pram, Disk Repair Utility. Any suggestions? Thanks.
If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide. -
I am getting an error message when trying to download PS elem 9 replacement on the part 2 of 2 download. Says "archived portion of dl are missing (something to that effect). What do I do to resolve this?
Ok if you continue to face difficulties then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
I am trying to download Elements 12. I've downloaded the two parts on your web site but when I run the second part it comes up with a message saying 'The file archive part of Adobe Photoshp Elements 12 is missing...'. What should I do?
Hello
I’ve managed to get it to work now but not as straightforward as I’d have liked and difficult to find out how to get help.
Rory -
I have tried to download photoshop elements x 5 times and keep getting message "the file archive part of photoshop is missing...."
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 11: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l -
I downloaded a large .tar file (should be over 100 GB) and tried to unpack it with 7zip, but I got an error message saying "Can not open file 'X.tar' as archive." I am trying to download it again in case it was just a random corruption or something, but since I have a few hours to kill, I was wondering if the problem may be that there is a limit to the size of files the download manager will handle.
Hi Salmonarm, <br/>Sorry no one replied earlier, you have probably solved the problem yourself by now.
I am not aware of any Firefox limitations on download size.
Are there any systems available for checking for corruption. Often downloads have hash values that can be used to check.
Also do you know the compressed file size, does it appear to have downloaded fully.
Are you running into limitations due to available folder or file size on your drive or file system.
* see http://en.wikipedia.org/wiki/Comparison_of_file_systems#Limits -
Link to download current HFM copy app utility?
Anyone have the link to download the most recent copyapp utility from Oracle? Thanks!
actually no, that is not the newest one, please only download 11.1.1.3.28 Service Fix patch 9391735 for the latest copy application utility
(and try not to spread misleading information in the forums) -
I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?
iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.
iOS is only for mobile devices, so:
Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
For Mavericks users:
http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101 -
I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob
Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely -
Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 > " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
TFTP_MACADDR: The MAC address for this unit
FE_PORT: 0= (default), 1
FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
5=Auto (default)
TFTP_DESTINATION: The flash destination device for the file
flash:(default), usbflash0:, usbflash1:
Command line options:
-h: this help screen
-r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick -
I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Using Apple Digital AV Adapter and sound output for iPad 1
Hi all! I'm trying to hook up my iPad 1 and iPhone 4 to a projector through HDMI that has very weak speakers. My solution is to hook up the video through HDMI and use my headphone jack or use my device speakers for sound. At first I thought it'd be o
-
Error while displaying OBIEE maps in ADF
Hi, I have integrated OBIEE dashboard with ADF. The maps are not being displayed on the jspx page. The following display error shows up: View Display Error Malformed url '/Application/BIProxy?cid=OBI&RedirectURL=saw.dll%2f%2fmapviewer'.+ Error Detail
-
Application Server Platform Edition 8.1 2005Q2 fails to start - CLI156
I have installed and re-installed PE8.1 on my laptop many times (with security off). I followed Quickstart and after 60 seconds end up with CLI156. I have upgraded from XP Home Edition to XP Professional. I have been going round and round for the las
-
Hi abappers, I want know what difference is important in a comparation table that is used with the t-code se11 --> Utilities --> versions --> version management --> remote comparison. As important I want say the attributes that which caused the error
-
I have a Apple Xserve G5 with Mac OS X 10.3.9 and I want to install red5 on it to deploy my application. As mentioned on http://red5.electroteque.org/dev/doc/html/SystemRequirementsForRed5.html, I need to install Java JRE 1.5 or 1.6 instead 1.3. Anyo