Trying to download itunes update and getting an error for 10.3.1

Open iTunes and they said there was an update.  10.3.1  I tried to download it, but once it starts installing, I get an error message stating "errors occured while installing the updates.  if the problem persistes, go to tools and download manually."  So I did that, so it tries to install and now i'm getting that an error has occured with quicktime and iTunes needs quicktime.  I have quicktime on my computer already, should I reinstall it?  I don't know how to fix this.....

replying to hajar
I have a similar problem. the error number is 2330.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

  • Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services

    Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Repeated failures trying to download iTunes update 10.5.1.42 for WinXP

    I have failed 4-times trying to download iTunes update 10.5.1.42 for WinXp. What is causing the installer failure? I have maintained the Windows XP system files and Windows Installer, along with iTunes versions until now.  The install process message says "THERE IS A PROBLEM WITH THE Windows Installer Package. A PROGRAM RUN AS PART OF THE SETUP DID NOT FINISH AS EXPECTED. CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."
    This is the first time I have had a problem updating iTunes on my XP desktop. 

    After reviewing other Download related problems, one reply suggested using the REPAIR feature from Window Control Panel, list of Software Installed.  I repaired 3 Apple software files and iTunes main file. Took about 10-12 minutes. Then reran "Check for updates" from iTunes/Help menu. Surprised to find 1 program listed that didn't popup "before" I repaired the Apple files.  New version of APPLE SOFTWARE UPDATE 2.1.3.127.  Tryed to install but it hung up/stalled. Then tried again only used the DOWNLOAD option instead of install option. Then Manually "Ran" that file from my Apple/Apple Software Update folder.  filenamed "APPLESOFTWAREUPDATE, type "Windows Installer Package" from Apple. It worked!! 
    Then Checked for updates from iTunes/Help, surprised to see (4) new files available. Safari 5.1.1; Mobile Control Panel 1.6.7; iTunes 10.5.1.42; and Quicktime 7.7.1. Installed all 4 and now iTunes 10.5+ runs great and my iCloud works, letting me catch up Downloads from the Apple/iTunes servers.
    What a pain in the @$#!!!! and it only took 2.5 hours to get it all figured out with 6 total attempts to update to iTunes 10.5.1.42. 
    Ready for double Scotch rocks.....

  • I'm trying to download an eBook and getting E_IO_Write error.  Can anyone help?

    I'm trying to download an eBook and getting E_IO_WRITE error.  Does anyone know how to solve this problem?

    I am getting the same error with the Bourne extras

  • Trying to download InDesign CC and getting an error message-

    Trying to download InDesign CC and getting an error message… "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign". All other apps that I've downloaded are working properly, but InDesign won't open.
    Here's the screen shot of the error box...

    Hi McMilla,
    as per the screen shot it looks like we dont have enough permissions on your Preference folder . I would suggest the following steps and let us know if these worked or not for you  .
    Go to //Library/Preferences/
            ~/library/Preferences
             /library/application support/Adobe
            ~/Library/application support/Adobe
    and give full permissions to Preferences folder and the Adobe folder.
    Cheers,
    Kartikay Sharma

  • Trying to download Photoshop Update -  Constantly get Failed error (49)

    I keep getting this error (49) when trying to download the latest update to Photoshop CC.  It states to contact Customer Service - which I did an they were useless.  Can anyone explain what is happening here - looks like I am not alone, and tell us how to fix it please.  Thanks.

    Without proper system info and other details like what Internet connection nobody can say much.
    Mylenium

  • When downloading itunes updates, i get an error that reads file folder for itunes media has an invalid character

    The error message read "file folder iTunes media has invalid character".

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I am trying to download a movie and get the message: "An unknown error occured (5002).  There was an error in the iTunes Store.  Please try again later."  Waited a day and still get the message.  Have downloaded movies before.

    I am trying to download a movie and get the message: "An unknown error occured (5002).  There was an error in the iTunes Store.  Please try again later."  Waited a day and still get the message.  Have downloaded movies before.

    Did you ever get an answer?

  • I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

  • HT1926 Tried to download itunes update 11.1.4. At 99% IE said, "This program contained a virus and was deleted."  Anyone else with this problem?  What do I do?

    Tried to download itunes update 11.1.4. At 99% IE said, "This program contained a virus and was deleted."  Anyone else with this problem?  What do I do?

    Hi JEOQ,
    Thanks for visiting Apple Support Communities.
    You may find the information and steps in this article helpful with downloading iTunes:
    iTunes: Downloading iTunes for Windows using Internet Explorer
    http://support.apple.com/kb/ts3212
    Best Regards,
    Jeremy

  • Trying to download itunes 10 and it gets to 99% and then just stops??

    i have been trying to download  itunes 10 and it keeps getting to 99% and then just stops with about 8 seconds left and does nothing?

    i have tried everything, disabled firewalls and anti virus, deleted temp files, got so fed up with trying thought it was my laptop which was currently a windows vista so have bought a new laptop but still unable to download itunes , when downloading have tried selecting both run and save but both start to download then stop before it completes with no warning or reason for failing,

  • HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Hi,
    I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Click here and follow the instructions.
    (99025)

  • Trying to download iphone update and my network connection timed out.  how can i correct this

    trying to download iphone update and my network connection timed out.  how can i correct this?

    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with adminis

    I previously downloaded the AI 30 day trial but was able to use it before the trial ran out I've since deleted it from my laptop (Windows 7 64 bit OS) How do I get it back? Trying to download AI again and getting error code 3 some thing to do with administration permissions?

    If your intention is to use the trial again it will not reset if you reinstall.  It will remain in its ran out state.

Maybe you are looking for

  • Problem with Socket and dynamic IP

    The problem I have is the following: My domain has a dynamic IP, so after the IP changes the s.accept() does not work any more! try // Point 1 *) ServerSocket s = new ServerSocket(portNumber); for(;;) Socket incoming = s.accept(); // does not work af

  • InDesign CS6 can't read EPS files from earlier version of InDesign

    I have a series of six violin method books (Kaleidoscopes for Violin) that I created in InDesign CS2.  Having now upgraded to InDesign CS6, all of the EPS files used in these books -- hundreds and hundreds of files -- are unreadable by the program. 

  • Equivalent for TOP 1 of SQL Server used in subqueries

    Hi all, I am trying to migrate a sql query from SQL Server to Oracle 9i, which uses the SQL Server TOP keyword in correlated subqueries. How should I write it in Oracle? The query is more complicated, but in principle looks like: SELECT TAB1.t1_id, T

  • New Rows in WAD with Free text characteristic

    I have created an input ready query and one of the characteristic (based on InfoObject 0POSTXT) created is to enter a free text for the given row.  In row selection there are also few more characteristics with master data already created. If I use BE

  • Time loop and events (again)

    Good morning, I still have problems with time loops and events. I have an event structure based on run time menu (two buttons: start stop). When I push start, an automatic sequence is started made of a state machine (so a while loop). I want to stop