Trying to duplicate Construction/Architect Specifications

Pages '09 doesn't open this format correctly so I don't know if it is possible to recreate. There is a mix of Tiered and numbered formats in the list style. Hopefully what I type below will show the approximate layout. If I need to email it to someone to look at I would be glad to do it.
PART 1 - GENERAL
1.1 INFORMATION PROVIDED FROM THE OWNER (Not indented level 1 tiered number)
A. The owner and/or its (Indented A indented level 2 numbers)
1. Geotechnical Engineering Reports (Indented level 3
a. Mass Excavation (Indented level 4)
1) (Indented level 5
PART 2 - PRODUCTS
2.1 EARTHWORK MATERIALS
A. ksdkkdkdkd
1. dfjfdjfdfjlfjdsljds
a.
PART 3 - EXECUTION
3.1 EXAMINATiON AND PROTECTION
A.
Message was edited by: darrenv

Maybe I didn't state this all correctly. It is a word document. Pages opens it fine. It has trouble correctly reproducing the styles and formatting in the document.
As you say, you did not state the scenario.
Even if we assume that Apple Pages is able to input the character information and the formatting instructions from Microsoft Word for Macintosh, then the appearance may not be possible to reproduce unless and until both applications have access to the selfsame TrueType/OpenType font files. Microsoft Word for Macintosh has its own internal font database, and that font database is not necessarily seen by the system level service that watches font databases. The same situation arises with Adobe InDesign that can work with fonts in its own internal font database inside the Adobe InDesign folder, unaccessible to Adobe Illustrator and Adobe Photoshop.
/hh

Similar Messages

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.

I am trying to duplicate a form and its not working.

I am trying to duplicate a form on my iPad using Adobe Reader. When I click on the copy/move icon the only option I get is move. I noted in the help there should be a "duplicate" option. I am using IOS 7 with the free version of the app. Should I be able to duplicate, and if so how do I get this option to show up?

I can copy to move it, but I need a new duplicate copy to fill out the form for new sites as I change location.

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

Error Oracle Mobile ORA-30023 Duplicate undo tablespace specification

Hi,
I have the following mobile application (Oracle Mobile 10g R3):
- Win32 (Forms 6i) App.
- snapshots (12 updateable, 36 read-only)
I have a successfully compilation of my form connected to the mobile database. However when I put a value over a textitem, my WHEN-VALIDATE-ITEM trigger send me an error:
ORA-30023 Duplicate undo tablespace specification
How can I solve this???, It seems like there is a parameter that I have to change.
The WHEN-VALIDATE-ITEM trigger only has a basic select over a "readonly" table.
Please help.
Regards,
Santiago

I think the problem is the following,
I need to convert a date to julian format, example:
to_char(sysdate,'j')
The problem is that it seems like Oracle Mobile connot support this kind format convertion.
So, How can I get the number of days between 01-jan-4712 BC and other date????
I found this function TO_DATE('-4712-01-01', 'SYYYY-MM-DD'), but it doesn´t works on Oracle Mobile.
If someone have any idea about how can I get the number of days between 01-jan-4712 BC and other day without using the format 'SYYYY'......please help

Frequent access privileges error when trying to duplicate an alias file

I am trying to create a set of applescripts to manage a symbolic link that points to an application's database folder. (aside: The application is not bright enough to let us select one of several databases, but a symbolic link named what the application is expecting works just fine - and was the solution suggested by the apps author.)
So I need to have a symbolic link named "app DB" in my Application Support folder. I have two symbolic links that point to the two database folders I use - one link named "app DB CD" and the other "app DB DVD" but their names don't matter. To switch which database I use with the application, I quit it, discard the "app DB" symbolic link, copy one of the other symbolic links into Application Support, change its name to "app DB" and fire up the application again. Works just fine, but I'd like to make all that an AppleScript, or at least two AppleScripts - one to swap in each database I use.
I tried to have ScriptEditor record my actions in the Finder but it did not record any of what I did except the renaming of the file. Unix's capability to copy a file and rename it at the same time would be perfect here but I don't have the Unix chops to try it yet.
I assembled a simple pair of AppleScripts that worked perfectly about a half dozen times. I was so delighted that I had gotten it to work that I just kept switching the symbolic link back & forth and launching the application for several minutes.
Sadly, like a kid playing with a toy too much it then just stopped working.
Now most of the time (but not all of the time) when the AppleScript tries to duplicate one of the symbolic links I get the following error:
"AppleScript Error
Finder got an error: The operation could not be completed because you do not have enough access privileges."
The first time I got this I checked the privileges for the files and folders. I had "read and write" for every one. On a lark I made the Group that bore my name "read and write" instead of just "read only". The AppleScript worked again - once. Then I got the same error over and over again. I went back and added "read and write" for Others (I know - not a good thing to do) and it worked again - once.
In the past day, the AppleScripts have again worked a couple of times along with 20 or 30 failures. I have not been changing the AppleScripts or the symbolic link files during this time. Through testing, it appears to throw this error at the command "duplicate" or "move":
duplicate alias file "Application Support:DB bits:app db CD"
I have found that if I try to use as a troubleshooting tool the AppleScript:
set foobar to (choose file)
and try to select the symbolic link file, it is not selectable - it is greyed out in the file list.
If I try:
set foobar to (choose folder)
I can choose the symbolic link file, but if I try to do anything with it like duplicate it, it duplicates the folder not the symbolic link file - as expected if I had thought about it.
Can anyone suggest how to reliably duplicate an alias/symbolic link file in MacOS 10.3.9? Should I instead be trying to write a Unix script and call it from AppleScript?
This is the first time in over five years that I have tried to use AppleScript, so please keep any explanations at a neophyte level. grn
G5 2x2 Mac OS X (10.3.9)

It's difficult to pinpoint your issue without actually seeing the code you've put together. Instead I wrote a script that sets up a situation roughly similar to yours, and then debugged that. What I found is that there are a lot of ways to do this wrong, and only one way to do it right. I could get shell scripts to work half the time, but then they stopped working altogether and I couldn't figure out why. So finally I thought it'd be best to delete the alias and tell Finder to make a fresh alias in its place as necessary.
The following demo script will work as-is with no configuration or set up. I'm hoping that you can read through the code, figure out how it works, then apply the knowledge to your script. If you need help, feel free to post your code for suggestions.
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">set test_A to "Folder A"
set test_B to "Folder B"
set the_alias to "The Alias"
set test_folder to "Alias Test Folder"
set my_desk to path to desktop folder as alias
tell application "Finder"
-- part 1: set up the test folder on the desktop
if folder test_folder of my_desk exists then
set test_folder to folder test_folder of my_desk
else -- create the folder
set test_folder to make new folder at my_desk with properties {name:test_folder}
end if
-- part 2: set up the test folders inside the test folder
if folder test_A of test_folder exists then
set folder_A to folder test_A of test_folder
set folder_B to folder test_B of test_folder
else -- create the folders
set folder_A to make new folder at test_folder with properties {name:test_A}
set folder_B to make new folder at test_folder with properties {name:test_B}
end if
-- part 3: set up the alias inside the test folder
if alias file the_alias of test_folder exists then
set the_alias to alias file the_alias of test_folder
else -- create the alias
set the_alias to make new alias file at test_folder to folder_A with properties {name:"The Alias"}
end if
-- part 4: choose where to link The Alias
set linked to ""
repeat
set msg to "Select a new destination for The Alias:"
if linked is not "" then set msg to "The Alias now links to " & linked & return & return & msg
tell me to set toggle to button returned of (display dialog msg buttons {"Quit", "Folder A", "Folder B"})
if toggle is "Folder A" then
set linked to test_A
delete the_alias
set the_alias to make new alias file at test_folder to folder_A with properties {name:"The Alias"}
else if toggle is "Folder B" then
set linked to test_B
delete the_alias
set the_alias to make new alias file at test_folder to folder_B with properties {name:"The Alias"}
else if toggle is "Quit" then
exit repeat
end if
end repeat
end tell
</pre>

Crash!? Edge crashed when trying to duplicate, copy objects

This is a recurring problem, that affects my projects and very disturbing..
when trying to duplicate, copy, sometimes even change position of an object in an already created project, the program crashes.... over and over again.
why??!!!
Elijahu

This is a project that breaks:
http://www.elijahu.net/download/madaf_x.zip

SQL MERGE trying to duplicate update/insert. The insert/update is not ideal, but the sql merge hangs.

I am trying to duplicate this update/insert with a sql merge:
-UPDATE [etag].Energy_Processed
SET Start_Datetime = estg.Start_Datetime,
--End_Datetime = estg.End_Datetime,
--Schedule_MW = estg.Schedule_MW,
--Active_MW = estg.Active_MW,
Load_Dt = GETUTCDATE()
FROM [etag].Energy_Stg estg, [etag].[Energy_Processed] ep
WHERE estg.Tag_Name IN
SELECT DISTINCT(tproc.Tag_Name) from [etag].[Energy_Processed] eproc
INNER JOIN [etag].[Tag_Processed] tproc ON tproc.Id = eproc.Tag_Id
INNER JOIN [etag].[Energy_Stg] estg1 ON estg1.Tag_Name = tproc.Tag_Name
AND ep.Active_MW = estg.Active_MW
AND ep.End_Datetime = estg.End_Datetime
AND ep.Schedule_MW = estg.Schedule_MW
INSERT into [etag].[Energy_Processed] (Tag_Id, Start_Datetime, End_Datetime, Schedule_MW, Active_MW, Load_Dt)
SELECT tproc.Id, estg.Start_Datetime, estg.End_Datetime, Schedule_MW, Active_MW, GETUTCDATE() FROM [etag].[Energy_Stg] estg
INNER JOIN [etag].[Tag_Processed] tproc ON tproc.Tag_Name = estg.Tag_Name
WHERE estg.Id BETWEEN @minEId AND @maxEId AND
estg.Tag_Name NOT IN (
SELECT DISTINCT (tproc.Tag_Name) from [etag].[Energy_Processed] eproc
INNER JOIN [etag].[Tag_Processed] tproc ON tproc.Id = eproc.Tag_Id
INNER JOIN [etag].[Energy_Stg] estg1 ON estg1.Tag_Name = tproc.Tag_Name
SQL MERGE:
MERGE [Forecast_Data_Repository].[etag].[Energy_Archive] enArch
USING
(SELECT ep.Tag_Id, ep.Start_Datetime, ep.End_Datetime, ep.Schedule_MW, ep.Active_MW, ep.Load_Dt
FROM [etag].[Energy_Stg] estg, [etag].[Energy_Processed] ep
WHERE estg.Tag_Name IN
SELECT DISTINCT(tproc.Tag_Name) from [etag].[Energy_Processed] eproc
INNER JOIN [etag].[Tag_Processed] tproc ON tproc.Id = eproc.Tag_Id
INNER JOIN [etag].[Energy_Stg] estg1 ON estg1.Tag_Name = tproc.Tag_Name
) AS sourceEP
ON EXISTS(SELECT sourceEP.Tag_Id)
WHEN MATCHED THEN
UPDATE
SET Tag_Id = sourceEP.Tag_Id,
Start_DateTime = sourceEP.Start_Datetime,
End_Datetime = sourceEP.End_Datetime,
Schedule_MW = sourceEP.Schedule_MW,
Load_dt = GETUTCDATE()
WHEN NOT MATCHED BY TARGET THEN
INSERT (Tag_Id, Start_Datetime, End_Datetime, Schedule_MW, Active_MW, Load_dt)
VALUES (sourceEP.Tag_Id, sourceEP.Start_Datetime, sourceEP.End_Datetime, sourceEP.Schedule_MW,
sourceEP.Active_MW, GETUTCDATE())
OUTPUT
$action,
INSERTED.Tag_Id
--UPDATED.Tag_Name
INTO @MergeOutput;
Greg Hanson

This bit
ON EXISTS(SELECT sourceEP.Tag_Id)
Looks wrong. Sould be something like:
ON sourceEP.Tag_Id = enArch.Tag_Id
And don't update the matching columns in the UPDATE part, as they already match.
David
David http://blogs.msdn.com/b/dbrowne/

Trying to duplicate this "Energy Flow" effect (originally created in AE)

Following the tutorial from videocopilot on "soul removal"...
http://www.videocopilot.net/tutorials/soul_removal/
I created a couple variations on an energy glow effect in AE, here:
http://www.youtube.com/watch?v=HzdwK2LoQbE
http://www.youtube.com/watch?v=KWYrfsSMZ0k
I think this should be easy to duplicate in Motion, but I'm going slightly nuts trying to figure it out. The effect is created by having some simple white circle particles with AE's Fast Blur and CC Vector Blur added. I know how to do something similar to Fast Blur in Motion, but I can't figure out how to achieve something equivalent to CC Vector Blur. There must be some way of creating something similar, though. Any Motion gurus out there care to help me save my sanity?
(I know there are somethings that AE can do, that Motion can't, but I don't think this is one. I would hope that Motion is able to do this)

First of all, thanks for intriguing me enough that I decided to waste my morning figuring this out.
Anyway, I watched the tutorial, and the conclusion I came to is that to attempt to duplicate the tutorial step by step is to undermine motion's capabilities.
Now, I will preface this by saying that my "energy flow" is not identical. But I think it looks really good. Also, I didn't work to modify it all that much, so I'm convinced that with a little tweaking, it'll look even better than the AE version.
Ok. When watching the AE tutorial, Andrew Kramer uses the CC Vector blur to turn circle particles into more of a smoky, curvy line. When looking at the way vector blur affected the particles, it reminded me of the caustics generator in Motion. So here's what I did.
First, I borrowed a pre-existing particle emitter that already looks like energy. You can find it in the library under the abstract folder in Particles. It's called Flow 01 interestingly enough. Then I adjusted the emission angle to 90 and the range to a small number like 7 or so. This gets the particles (which BTW are curved lines, not circles) moving to the right like the tutorial.
Then I increased the speed quite a bit, and the birth rate a little, and introduced some speed randomness. Again, you can tweak these to give this the look you want. Once I got the flow moving, I had to set up the distortion.
I created a new group and placed the caustics generator in there. I tweaked the generator so that the water-like ripples were small, bright, and had a high level of refraction. Then I applied a gaussian blur to the generator to soften the edges quite a bit.
Going back to my particle group, I added the Refraction filter from the Distortion folder. But (and this is important), I added it to the GROUP, not to the emitter. The reason has to do with a step below. I used the caustics generator as the source for the refraction (and turned off the caustics group as well) and made sure I had high levels of refraction and softness.
This more or less made my emitter look like a reflection in water, until I fixed the resolution for the group. Then I got the look I was going for.
And that is all there is to it. You'll still have to do the rest like duplicate the emitter, add an emitter that does the little flying particles, but the energy stream looks good to me.
I'm including a link to my project so you can take it apart. I hope this helps.
[Energy Flow|http://www.timesavertutorials.com/fileshare/energy.zip]
Andy

I'm on a label sheet of ten labels, trying to duplicate the ingredients on one label to all the other nine. How do I do this.

I'm using a MACO ml-1000 label sheet for ingredients of my beef jerky. It has 10 labels/sheet. I've typed in the ingredients on one label. How do I duplicate that one label over to the other nine labels?

Hi makaainana,
I tried to paste the label off the desktop to the label in TextEdit,
What is the file type of the label on your desktop? How did you create it? How did you copy it?
This may work. In TextEdit, make the document Rich Text.
I copied a screen shot from my desktop and that pasted into TextEdit. I don't know what else will paste.
Regards,
Ian.

ORA-12528: TNS listener BLOCKED - trying to duplicate database

Hello,
I would like to test the RMAN duplicate from active database in version 11.2.0.1.
The name of the duplicate (auxiliary) database should be "clonedb". I created a password file, spfile and added the clonedb database to tnsnames.ora. The clonedb instance is in nomount state. Tnsping clonedb is also working.
When I try to make a connection:
sqlplus 'sys/mypassword@clonedb as sysdba'
ORA-12528, Blocked, all appropriate instances are blocking new connections.
So I wonder if this could be due to the nomount state of the instance and dynamic listener configuration. Correct?
I made an entry in the listener.ora file, and it's showing "clonedb" status UKNOWN now, but I still cannot make a sqlnet connection since the dynamic listener apparently takes precedence. Can I turn off the dynamic listener configuration, but then I will loose the connection to the other databases. Do I need to make manual entries in listener.ora for all databases in order to perform RMAN duplicate?
I also tried to connect to the auxiliary clonedb instance as local target with OS authentication, but the ORA-12528 error persists. Sqlplus / as sysdba works though. Below some more info. Any ideas how to resolve the issue.
Thanks!
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 19-DEC-2010 01:05:40
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                19-DEC-2010 00:39:22
Uptime                    0 days 0 hr. 26 min. 18 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/ol55/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ol55.example.com)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM", status READY, has 1 handler(s) for this service...
Service "clonedb" has 1 instance(s).
Instance "clonedb", status UNKNOWN, has 1 handler(s) for this service...
Service "clonedb.example.com" has 1 instance(s).
Instance "clonedb", status BLOCKED, has 1 handler(s) for this service...
Service "orcl.example.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.example.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "rcat.example.com" has 1 instance(s).
Instance "rcat", status READY, has 1 handler(s) for this service...
Service "rcatXDB.example.com" has 1 instance(s).
Instance "rcat", status READY, has 1 handler(s) for this service...
The command completed successfully
$ tnsping clonedb
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 19-DEC-2010 01:06:18
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = clonedb.example.com)))
OK (10 msec)
$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
RCAT =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rcat.example.com)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.example.com)
CLONEDB =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = clonedb.example.com)
$ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ol55.example.com)(PORT = 1521))
SID_LIST_LISTENER =
   (SID_LIST =
       (SID_DESC =
           (ORACLE_HOME= /u01/app/oracle/product/11.2.0/db)
           (SID_NAME = clonedb)
ADR_BASE_LISTENER = /u01/app/oracle
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
$ cat initclonedb.ora
clonedb.__db_cache_size=192937984
clonedb.__java_pool_size=4194304
clonedb.__large_pool_size=4194304
clonedb.__oracle_base='/u01/app/oracle'
clonedb.__pga_aggregate_target=339738624
clonedb.__sga_target=503316480
clonedb.__shared_io_pool_size=0
clonedb.__shared_pool_size=293601280
clonedb.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/clonedb/adump'
*.audit_trail='db'
*.backup_tape_io_slaves=TRUE
*.compatible='11.2.0.0.0'
*.control_files='/scratch/oradata/clonedb/controlfile/control01.ctl','/scratch/oradata/clonedb/controlfile/control02.ctl'
*.db_block_checking='full'
*.db_block_checksum='full'
*.db_block_size=8192
*.db_create_file_dest='/scratch/oradata/clonedb'
*.db_domain='example.com'
*.db_name='clonedb'
*.db_recovery_file_dest='+FRA'
*.db_recovery_file_dest_size=12884901888
*.log_archive_dest='/scratch/oradata/clonedb/archivelog'
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=clonedbXDB)'
*.memory_target=843055104
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
*.db_file_name_convert=('+DATA','/scratch/oradata/clonedb/datafile')
*.log_file_name_convert=('+DATA','/scratch/oradata/clonedb/logifle')

Thanks for responding. Here is the log from the last connection attempt - I removed some xml codings:
time='2010-12-19T01:23:23.007+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ol55.example.com'
host_addr='127.0.0.1'>
WARNING: Subscription for node down event still pending
time='2010-12-19T01:23:23.008+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ol55.example.com'
host_addr='127.0.0.1'>
19-DEC-2010 01:23:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=ol55.example.com)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186646784)) * status * 0
time='2010-12-19T01:23:33.575+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ol55.example.com'
host_addr='127.0.0.1'>
19-DEC-2010 01:23:33 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=clonedb.example.com)(CID=(PROGRAM=sqlplus)(HOST=ol55.example.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=56278)) * establish * clonedb.example.com * 12528
time='2010-12-19T01:23:33.575+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='ol55.example.com'
host_addr='127.0.0.1'>
TNS-12528: TNS:listener: all appropriate instances are blocking new connections

How to delete duplicates of some specific fields in internal table

i am having internal table of it_ekko.
in that i am having some data of PO no, Line Item,IR value and IR qty......
i am having data like below.
PO                        Line Item   IR Value    IR QTY
200310051          0010         1500           4500
200310051          0010        1500           4500
200310052         0010           0                   0
200310052          0010       0               0
now where ever IR value and IR qty is present i wanted that to display only once against that PO and line item
i wanted like below
PO                        Line Item   IR Value    IR QTY
200310051          0010         1500           4500
200310051          0010            0              0
200310052         0010             0                0
200310052          0010            0               0
Field names for IR value and IR Qty are Menge2 and dmbtr2.
How to do that.........
I cant use
Delete adjacent duplicates of it_ekko by ebeln = wa_ekko-ebeln and
                                                                      ebelp = wa_ekko-ebelp.
because i wanted that po and same line items , how many times it is like that only.....
in it_ekko table i only wanted to delete duplicates of menge2 and dmbtr2.
Pls suggest the code

sort itab by po item ascending.
loop at itab into wa.
at new wa-item.
if wa-qty1 ne 0 and wa-qty2 ne 0.
move wa to wa_final.
append wa_final to i_final.
endat.
endloop.
or
loop at itab into wa.
at new wa-item.
if wa-qty1 ne 0 and wa-qty2 ne 0.
write wa.
endat.
endloop.
make sure that the qty1 and qty2 is not character type , then in control statement it will replaced by *.

Trying to duplicate a form in a PDF

I have multiple PDF files that I have merged together and use as a sales tool. I would like to create a form to put in the top corner of the page where I can fill in the pertinent data. I can obviously do this for one page, but is there some way to make the form show up on all the subsequent pages as well without copying and pasting multiple times? Thanks!

Select the form fields and execute the menu Forms > Edit Fields > Duplicate...

Error while trying to duplicate a database

I've got the following problem with rman-duplicate (oracle 10gR2) (see also: [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=4446855#4446855])
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/22/2010 10:49:05
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
- followed by the list of all datafiles
I've made a full backup of the target database right before the duplicate. Rman reports (list backup; crosscheck backup) the availability of all database backups with all its datafiles.
Unfortunately in my case the reported very strange "shutdown abort"-"startup" - workaround doesn't work.
Has anyone any other hints - or is it just a serious bug (which would prevent me from further time-wasting trials ...).
friedhelm

Hashmi wrote:
Post your duplicate database command with error.Here is teh whole procedure (script):
RUN
SET until time "to_date('22/07/2010 10:10:00','DD/MM/YYYY HH24:MI:SS')";
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
SET NEWNAME FOR DATAFILE 1 TO '/oracle/oradata/VG41VWT/system01.dbf';
SET NEWNAME FOR DATAFILE 34 TO '/oracle/oradata/VG41VWT/domea_ftr_imt_10.dbf';
SET NEWNAME FOR TEMPFILE 1 TO '/oracle/oradata/VG41VWT/temp01.dbf';
DUPLICATE TARGET DATABASE TO VG41VWT
LOGFILE
GROUP 1
'/oralogs/redolog/VG41VWT/logVG41VWT1.log',
'/oralogs/redolog/VG41VWT/logVG41VWT2.log',
'/oralogs/redolog/VG41VWT/logVG41VWT3.log'
) SIZE 10000K,
GROUP 2
'/oramirr/redolog/VG41VWT/logVG41VWT1.log',
'/oramirr/redolog/VG41VWT/logVG41VWT2.log',
'/oramirr/redolog/VG41VWT/logVG41VWT3.log'
) SIZE 10000K;
exit
The Error-Message is:
executing command: SET NEWNAME
Starting restore at 22-jul-10 14:24
released channel: aux1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/22/2010 14:24:04
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 34 found to restore
etc.
EDIT:
Now I realize that there is a "released channel" - message just before the Error message. But I don't think this is the reason for the trouble, but part of the ERROR-treatment.
Thanks
f.
Edited by: user8964905 on 22.07.2010 05:55
Edited by: user8964905 on 23.07.2010 01:43

Trying to duplicate Construction/Architect Specifications

Similar Messages

Maybe you are looking for