Trying to export/import 10g 10.2.0.3 data into an 8i (8.1.7.0) database

I am trying to create an full export of a 10g database 10.2.0.3 and then import into an Oracle 8.1.7.0 database. I was told to use the 8i version of both the exp and imp utilities. I keep getting nls_character set errors. The 10G database is AMERICAN-AMERICA.WE8MSWIN1252 where the 8i database is WE8ISO8859P1. I was told to set the registry entry for NLS_LANG to that of the setting in 8i but I am still getting errors when I run the 8i export logged into the 10g database. What initialization parameters on the 10g and/or 8i database and within the windows environment variables/registries need to be set in order to pull this off?
Can this be done? Can I use the 10g imp ultility and use the .dmp file that to imp into the 8.1.7.0 database? We are doing this in case management wants to revert back to 8i in there is a showstopper issue when we go production on 10g.

8.1.7.0 database. I was told to use the 8i version of
both the exp and imp utilities. I keep getting
nls_character set errors. ...and the errors are?
The 10G database is
AMERICAN-AMERICA.WE8MSWIN1252 where the 8i database
is WE8ISO8859P1. I was told to set the registry entrySo you are going to a superset, which is good, if your character data were stored properly in 8i.
You might want to run the db character set scanner against 8i to find possible conversion issues. Running csscan from 10g home against the 8i db should work.

Similar Messages

Error ORA-02375 while trying to export/import JTF.JTF_PF_REPOSITORY table

We have already created an SR, In the mean time, trying to see whether anyone else has come across this issue. Thanks.
On : 11.2.0.3 version, Data Pump Import
Error ORA-02375 while trying to import JTF.JTF_PF_REPOSITORY table
We are getting the below error while performing the full db
import.
ORA-02375: conversion error loading table
"JTF"."JTF_PF_REPOSITORY" partition "EBIZ"
ORA-22337: the type of accessed
object has been evolved
ORA-02372: data for row: SYS_NC00040$ :
0X'8801FE000004AD0313FFFF0009198401190A434F4E4E454354'
This issue is
stopping our upgrade of database from 10.2.0.4 to 11.2.0.3. This is very
critical for us to be resolved.

Hi,
seems this is Character set issue fo source and Target DB check this doc:Unable to Export Table WF_ITEM_ATTRIBUTE_VALUES due to errors ORA-02374, ORA-22337, and ORA-02372 (Doc ID 1522761.1)
HTH

Integration console is hung when trying to export/import from/to catalog

Hi,
When i try to export or import models from/to catalog the eis console is hung and not responding...i am not sure if it has to do something with java variable.. i would request you to share your thoughts in this regard.
Thanks,
Praveen

I am exporting the file from TxEIS (in the Firefox web browser) and it does not download properly. Acccording to Firefox documentation, it is supposed to automatically recognize the file extension. I have not experienced this on any other machine within our environment. Other users are performing this same process with no problems. The browers settings are exactly the same as the machines that are working right.

Trying to export / import a Servlet

Hi all
I created a servlet on Netbeans on one computer that I'm now trying to set up in netbeans on another computer. The simplest way might be just to copy to servlet source, but I was hoping maybe there was a way to deploy this all automatically?
I tried copying my ear file over, but I could not find a way to create a new project from it in Netbeans.
Can anyone advise on the best way to do this?
Thanks,
-Tom

tjacobs01 wrote:
Hi all
I created a servlet on Netbeans on one computer that I'm now trying to set up in netbeans on another computer. The simplest way might be just to copy to servlet source, but I was hoping maybe there was a way to deploy this all automatically?SVN, GIT, ...

PC suite export/import breaks SMS messages

Nokia PC suite 6.85.14.1
Windows XP SP2
Phone 6500 classic connected either by Bluetooth or USB
just updated 6500c to 4.84 firmware
an sms message is received and is viewable fine in Inbox
using the phone I move it to Archive, it is still OK
I then export it to PC (drag-n-drop to a folder)
I delete the message in the phone and import (drag-n-drop) back to Archive
The message is there but it does not show sender name (instead I see the date in the header)
When I open the message and click message details, I can see that
To: field contains the actual sender, while Sender: has (no address)
I tried various things including messing with vmg content (putting same TEL: field to both VCARD entries), but on the import to 6500c, it is the same story - as if the import swaps the sender with receiver and clears the sender field
Please also note that at all times, when I view the messages in PC Suite (phone browser) they show correct sender field, I just need to see the same on the actual phone
Is there something I am missing?
Generally I just need to copy old sms messages from 7260, but when importing them they break as described above. I then tried to export a "6500" message and import it back - with same result. So it appears to be a PC Suite issue rather than anything

al_lea, thanks, I already thought about that, but as I said to exlucde any incompatibility issues within vmg I tried a export/import of a "native" sms freshly received on the 6500, and it gives the same problem.
I also tried changing versions to 3.0 manually in the vmg with no luck.
I'm starting to think the message is actually ok, but it's probably the 6500c software that doesn't display them right. When I try to reply to "broken" message, it does go to sender, even though he is not displayed as one
it looks like PC suite export or import strips the empty to: VCARD from inside the vmg, which is fine by the standards but 6500c doesnt like

Problems in export / import repository

Hi there,
I'm trying to export/import a repository.
The first trouble is: I export the topology, but when I import it nothing is imported (no error messages).
I resorted to manually reconfiguring the topology
The second and worse trouble is: I exported the project and the models, then I imported the project (successfully)
but when I tried and import the models I got some error messages related to missing data (referential integrity)
Any help is warmly appreciated
Regards
Andrew Florit

I've got the same problem "I export the topology, but when I import it nothing is imported (no error messages)."
What could be the solution?
Thanx

Export/Import Data Pump

HI
AIX 5.3
Oracle 11.2.0.1
Oracle 10.2.0.3
I have done FULL export in 10g and Import 10g and also 11g using DATA PUMP. But I could not find any DBLINK in target database.
Does it create DBLINK while import?
Thanks,
Vishal

I have done FULL export in 10g and Import 10g and also 11g using DATA PUMP. But I could not find any DBLINK in target database.
Does it create DBLINK while import?It does. Depends on the option used while Datapump Import.
Full Database export exports DB_LINKS.
database_export_objects shows
SELECT named, object_path, comments FROM database_export_objects WHERE named='Y';
Y DB_LINK Private and public database linksHTH
-Anantha

Oracle export/import and indexing

Hello All,
I am a newbie in oracle filed and trying to understand export/import funtionality and indexing related to it. May be it's silly but I don't get any other way to understand it.
Below are the topics I tried to understand-
1) I export one Db and trying to import that in another database server. I used sysdba username to import. A new table space will get created or how the data will store in database what would be the effect in indexing with this export and import.
2) If i import one more db on the same database server using sysdba username then also how indexing will behave?
Please help me to understand
Thanks
Sayan
Edited by: Sayan_Roy on Sep 26, 2011 11:41 PM

Indexes are tied to tables. The default behaviour, in the absence of you specifying any directives, is that Oracle runs
CREATE TABLE
INSERT INTO table
CREATE INDEX
So, the Indexes are created after each of the corresponding tables.
Do NOT ever attempt to export/import objects owned by SYSDBA. You should be creating a separate schema to hold all your objects (Tables, Indexes, Views, Procedures, Functions etc). That separate schema can be exported and imported into another database. If you have multiple such schemas, a Full Export Import will copy all the schemas.
If a schema preexists in the target database, the import will error when attempting to CREATE TABLE --- unless you specify directives to handle this.
Please read the documentation on Export and Import for the version that you are testing.
Hemant K Chitale

Export/Import problem please help

Hi All,
I have a strange problem in Export/Import.. I don't know ,where to fix..
I'm trying to Export/Import dmp file in new Schema.
when i'm exporting the tables, it is writing with storage options(Which causing me the problem, I don't have a enough space in the tablespace and i can't increase any more)
I don't want the table data, i want only table structure without storage option.
So,i'm looking export syntax without storage options to the table(like inital extents,increment,max extents like that)
I'm writing like this
exp system/manager@connectstring file=exp.dmp log=exp.log owner=sys rows=N statistics=none indexes=n compress=N
Any idea ?
Thanks
James.

Why are you exporting at all? You say you want to place this info into another schema (on the same instance? or an instance on the same network?) Just run this script:
alter tablespace mytablespace
default storage (initial 256K next 256K);
set heading off pages 0 echo off termout off
spool a.sql
select 'create table newschema.'||table_name||' tablespace mytablespace as select * from '||table_name||' where 1=2;'
from all_tables
where owner='OLDSCHEMA';
spool off
@a.sql
If the new schema is on a different instance or server, you will have to create a db link first.

Page Export/Import problems

I have been trying to migrate my portal 3.0.7 development to another portal 3.0.8 development database and have been having problems with the page export and import routines. I have been following the Oracle Export / Import document and first come across the problem when importing the content area as it tries to import its content area page.
I have then tried to export / import pages separately and consistently get the following error.
pageimp.csh s portal30 p portal30 m reuse d pobpage.dmp c Kenny.ogg security
Start Portal Page Import
Please Wait...
declare
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWUTL_POB_TRANSPORT", line 1879
ORA-01403: no data found
ORA-06512: at line 6
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Import of Portal Page Complete
The Export command used was as follows:
pageexp.csh s portal30 p portal30 n PAGE0 d pobpage.dmp c tools.ogg security
As I am migrating from 3.0.7 to 3.0.8 I use the 3.0.7 export script and the 3.0.8 import script. For completeness I have also tried using the 3.0.7 and 3.0.8 import and export scripts, and get the same error.
The version of Portal I am using is the Solaris version.
When I look at the new site and click on the pages Tab no new pages are loaded as expected. Does anyone have a similar problem or am I overlooking something?
Any suggestions?
Thanks
Garry
null

Portal 3.0.8 is now available in both NT and UNIX. So you need to upgrade both your platforms and then use export/import between the same versions. That's easier said than done as I have yet to get the export/import scripts to correctly and fully work on exporting from NT to UNIX Tru64. Originally I ran the scripts on NT and connected to the UNIX DB; however, somewhere I saw that it is more relaible to run the scripts on UNIX. So I am trying that now.
Good luck!
(By the way I notice that Larry declared war on complexity. The laughable irony of this is revealed by a look at these discussion boards!)
null

Suggestions needed for Export/Import Business Area Problem

I'm trying to export/import a Business Area from one instance to another and I get the following error during import processes.
Database Error - ORA-00001: unique constraint (EUL4_US.EUL4_EXP_PK) violated
The Business Area I'm trying to import doesn't exists in new instance. During the import wizard I've checked refresh existing object and match by identifiers.
I think my target instance has objects with same identifiers, so I went ahead and changed the identifiers in my source, but still problem persists. How can I correct this error?
Thanks

Did you happen to copy the EUL from one database to another before you were importing/exporting the BA?
Discoverer recognizes EULs using unique reference numbers. However, if you use the database export and import utilities to copy an EUL, the new EUL (including its reference number) will be identical to the original EUL. When EULs have the same reference number, EUL consistency issues can arise if you do both of the following:
* If you modify objects in both the original EUL and in the new EUL
* Having modified objects in both EULs, if you then attempt to copy objects between the two EULs using the Discoverer Export Wizard and Import Wizard (or the Discoverer /export and /import commands)
To avoid potential EUL consistency issues, run the eul5_id.sql script as the owner of the new EUL. The eul5_id.sql script gives a new refererence number to the new EUL and thereby avoids any potential EUL consistency issues.
Reference
* How to import an EUL using the standard database import utility
http://download-west.oracle.com/docs/html/B13916_04/maintain_eul.htm#i1008632
For 4i, you will ned to run:
sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
sql> commit;
Some similar EUL inconsistencies are documented in:
Note.267476.1 Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
You might want to check that if the EUL version timestamps are the same.
~Steve.

Export/import oracle9

Hi,
since I do not have a good knowledge of oracle, hopefully somebody may help me to understand better how export/import work (oracle 9)
A colleague as run an export from a production server, now he needs to run the import on a test server but it fails.
Could someone be so kind to let me know what I have to take into consideration before running both commands ?
I explain better:
I have noticed that the DB_BLOCK_SIZE is indeed different on the two servers (production server has a DB_BLOCK_SIZE=4096)(test server has a DB_BLOCK_SIZE=8192)
so the first thing I have seen in the import log file is an error message saying that "tablespace block size 4096 does not match configured block sizes"
So my first question would be: is there any chance to run export/import on two servers with different DB_BLOCK_SIZE ?
Then (due to my ignorance of the subject):
- is there any problem is the SID is different on the two servers ? or it is not important ?
- is it important that the PATH of "*dbf" files is different on the two servers or this fact is not taken into consideration at all (since only 'logical' data are taken into consideration) ?
- do the tablespaces currently used on the production server have to exist in the test server in order to have a successful import ?
Hopefully somebody has few minutes to answer my question.
Thanks a lot in advance.

Hi,
Are you talking about FULL export/import method, right? Well, Oracle 9i supports multiple block sizes in the same database. So, it gives you an option of using multiple block sizes, which is especially useful when you are transporting tablespaces from another database with a different block size. In this case, will be necessary to set the initialization parameter called DB_nK_CACHE_SIZE in the initialization parameter file. For example, in your case, if your standard block size is 8KB, you will need to pre-create a tablespace with a block size, say 4KB that are currently using on your product server and then you will must set the DB_4K_CACHE_SIZE parameter in your test server. The DB_nK_CACHE_SIZE The parameter is dynamic so you can alter its value using the ALTER SYSTEM statement.
>>- is there any problem is the SID is different on the two servers ? or it is not important ?
No problem ...
>>- is it important that the PATH of "*dbf" files is different on the two servers or this fact is not taken into consideration at all (since only 'logical' data are taken into consideration) ?
In fact, It is important that the tablespace exists in the target database and doesn't matter where they datafiles are located. In this case, logical data are taken into consideration.
>>do the tablespaces currently used on the production server have to exist in the test server in order to have a successful import ?
Yes. For a full import method, this is very important. So, you will need to pre-create the tablespaces in your target tablespaces, but in this case they need to be created with 4k of block size, as I said before. Anyways, you will need to make some tests.
Otherwise, if you want to make a test, create a database on you test server using 8k default block size and use the export user method instead.
Eg.:
If you have the user A, B and C using the TBS_1 in your prod database, so, create the tablespace TBS1 using the default block size (8k) in your test database and make this test below:
PROD DATABASE
exp a/pass file=a grants=n
exp b/pass file=b grants=n
exp c/pass file=c grants=n
TEST DATABASE
create the users A,B and C and perform these tasks below:
imp a/pass file=a full=y
imp b/pass file=b full=y
imp c/pass file=c full=y
In addition, give a feedback ....
Cheers
Legatti

SYSTEM Copy with Data ( SAP Export/Import way)

Hello ,
There is requirement at my client site to build SAP system copy from Production System without copying Data but
should have Programs/ Structures / Repository/ Tables & views etc.
Though We have thought of building SAP system with Export/ Import way and then deleting the Client from copied system
after that running Remote client copy from Source to Target system with SAP_CUST profile
But I have heard with SAP Export/Import way , We can have SAP data copy skipped and only structure to copy. If there is any way
of such kind then Please help me in letting know the same
Thanks
Deepak Gosain

Hi Deepak
Kindly refer the SCN link difference between the Client copy Export / import & Remote copy method
Difference between remote client copy and client Import/Export- Remote client copy steps
BR
SS

How export a pie graph(displayed in jspx page) into a PPT file.

I am trying to export a pie graph(displayed in jspx page) into a PPT file using Apache POI. But I am facing a problem when I calling the below mentioned code from a button.
Code:
SlideShow slideShow = new SlideShow();
Slide slide = slideShow.createSlide();
FileOutputStream out = new FileOutputStream("slideshow.ppt");
slideShow.write(out);
out.close();
The above mention code is working and a blank ppt file is created when I am running the code from a standalone java class. But when it is called from button in an adf project code is not throwing any exception but the ppt file is not created.

Hi,
sorry but the code snippet alone doesn't help to solve the problem. Did you debug the code to see if it works? My assumption is that the file gets written, just not in the directory you are looking at
Frank

How to import MS Excel data into an exisiting SharePoint List?

Hi Guys,
Is it possible to import an excel list or excel data into a SharePoint List that has already been created? Not create a new list.
I know you can import a spreadsheet which will create a new list, but I don't want that because I have created columns already that do calculations and such and I don't want to recreate them....
It can be either an excel or access list, but I want to make sure the pre-existing columns in still my SharePoint list.

Sure,
Go to list datasheet view in IE
Open excel and copy the range
Paste in datasheet view
If column range match and validation overcome, data will start pasting as expected.
http://3sharp.com/blog/copy-and-paste-from-excel-to-a-sharepoint-list/
https://clintoncherry.wordpress.com/2008/02/27/bulk-copy-and-paste-into-a-sharepoint-list/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/3c60ee05-1408-4b73-bb2b-2d42bf913572/how-to-copy-excel-sheet-data-to-sharepoint-2010-list
Hope this will help
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Trying to export/import 10g 10.2.0.3 data into an 8i (8.1.7.0) database

Similar Messages

Maybe you are looking for