Trying to extend my airport extreme network with an airport express

I´m trying to extent my network with an airport express 802.11g.
I´ve been fallowing the guide:
http://support.apple.com/kb/HT4259
however, when I´m trying to configure the extended wifi base station ( point 8.)  it won´t let me choose "extend a wireless network".
The only options I have is "create network", "join network" and "participate in a wds network".
I´ve been trying to find a solution all day.
Is there anyone out there who has hade the same problem or knows what it could be?
I´ve made sure that my base station connected to the internet through ethernet has checked the "allow this network to be extended"

however, when I´m trying to configure the extended wifi base station ( point 8.)  it won´t let me choose "extend a wireless network"
Unfortunately, the older AirPort Express 802.11"g" model does not have a setting to "extend a wireless network", so it cannot be used the way that you want.
The article that you reference should be clear about this:
This article explains how to set up an 802.11"n" extended wireless network.
You need to use one of the newer AirPort Express 802.11"n" models to gain the ability to "extend a wireless network".

Similar Messages

  • Can't join the airport extreme network with my iphone~~please help

    Can't join the airport extreme network with my iphone

    What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

  • Extending Airport Extreme network with Airport Express using WDS

    I have been having some trouble using WDS between an Airport Extreme and Express, with the Extreme acting as the internet router in the network.
    Both devices have been updated with the lastest firmware.
    I am using Airport Utility 5.5.1
    *Airport Extreme Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Allow Network to be extended: Checked
    Radio Mode: Auto
    Security: WPA/WPA2 Personal
    Channel Selection: Manual (Same as my Express)
    *WDS Tab*
    WDS Mode: WDS Main
    Allow Wireless Clients: Checked
    WDS Remotes: (MAC of my Airport Express)
    *Airport Express Configuration*
    *Wireless Tab*
    Wireless Mode: Participate in a WDS network
    Channel: (Same as my Extreme)
    Network Name: (my network name)
    Wireless Security: WPA/WPA2 Personal
    Allow this network to be extended: unchecked
    Radio Mode: 802.11n (802.11 b/g compatible)
    *WDS Tab*
    WDS Mode: WDS Remote
    Allow Wireless Clients: checked
    WDS Main: MAC of my Airport Extreme
    I think that covers the pertinent stuff. If there's anything else that might be useful, please just say so.
    So, the Extreme is green-lit, working fine. Wireless clients can connect to it just fine. On the Wireless Clients page the MAC of my Express is showing up, with a type of WDS listed. It does not, however, show up under the DHCP clients section.
    The Express is yellow-lit. Sometimes after a setting change it goes green for a minute or so, then back to yellow, reporting a WDS Error ("the AirPort Wireless device is set up as part of a WDS network, but no other AirPort wireless devices were found").
    The Airport Express is ending up with an ip address of 169.254.49.198 (an automatic private). It seems it's not getting an ip from the Extreme's DHCP.
    Do I have some sort of authentication issue here? Honestly I'm totally baffled.
    Any help with this would be greatly appreciated.
    Would the routers' logs be of any help?
    Thanks
    Message was edited by: Xaniel

    Wait, just did a bit more reading. Am I correct in assuming now that the "Extend a network" option will function as a wireless repeater, with no ethernet connection to the main router required
    Yes. This will provide much better wireless performance...and...its much easier to configure.
    On your AirPort Extreme, open AirPort Utility - click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode = Create a wireless network
    Make sure there is a check mark next to "Allow this network to be extended"
    Update to save settings
    On the AirPort Express, open AirPort Utility - click Manual Setup
    Click the Wireless tab
    Wireless Mode = Extend a wireless network (hold down the option key when you click on the selection box if you do not see this setting)
    Wireless Network Name = Click on the selection box and name of your AirPort Extreme network should appear
    Check mark next to Allow wireless clients
    Wireless Security = Exact same setting as the AirPort Extreme network
    Wireless Password = Same password as the AirPort Extreme network
    Confirm Password
    Update to save changes
    A good starting location for the Express is a point that is about 1/2 to 2/3 the distance from your AirPort Extreme to the area that needs more coverage.
    The ethernet port on the Express is also enabled, so you can connect an ethernet device if needed. Post back to let us know how things are working.

  • Is it possible to extend an Airport Extreme Network with a normal router ?

    Hi everyone !
    I know this question as been asked a lot before, but not in this way, I always saw : How to connect an Airport Extreme/Express to a Normal (D-Link, Linksys, Ect.) Router. What I wan't to do is connect a normal router to my existing Airport Extreme to extend the range of it. I know you can extend the network with an Airport Express, the thing is, i wan't to try with the router I replaced by the Airport Extreme. It's an D-Link DIR-615. If someone know how to do this it will be very nice and helpfull for me! I know on Apple website it says that it's not possible but some people seems to get it to work!
    Thanks a lot !
    (Sorry for my bad english i'm french Canadien)

    You can extend the wireless range of the AirPort with a D-Link or the other way around ... BUT only if the connection between them is wired. This would be the basis of a roaming network. If you must have them interconnected by wireless, then it will NOT work.

  • Will Airport Extreme Network with Panasonic Viera TC-P50ST30

    Will Airport Extreme Network work properly with Panasonic Viera TC-P50ST30 HDTV?

    I don't have this particular model, but I do have a Panasonic TC-P42GT25 plasma which has no difficulties accessing the Internet through my 4th Gen AirPort Extreme Base Station or 4th Gen Time Capsule.

  • Trying to extend my Airport Extreme network using two Airport Express

    Ok, so just an hour ago I had a network working fine that was set up like this:
    Modem => Airport Extreme => Airport Express 1 / Airport Express 2
    Stupidly I decided to rename one of them, to their specific room location, using Airport Utility 6.3.2, after it came back online it was listed on the utility bliinking yellow, when I hover over it with the mouse I can see the YELLOW DOT next to STATUS: Extend network, if i click on that it gives me the option to A) IGNORE B) EDIT and futher it goes on to say that it CAN NOT EXTEND THE NETWORK, asking me to check if the device is configure correctly/password is correct/or within range.
    I have tried everything, reset, factory reset, setting it up again, and it just comes back blinking yellow.
    Stupid again: I decided to unplug the other Airport Express, to see if that would help bringing the first one online again, now I have TWO yellow - non-able-to-extend-range Airport express units in the house.
    Naturally I am quite frustrated, so any good advice will be very much appreciated, thanks!
    The Airport Extreme is version 7.6.4 and serial number 6F8070MYYEW (If that helps anyone), both Airport Express is the latest version.

    Hi Bob thanks!l
    After about two hours of trying everything, I finally did something that fixed the issue, and since I have been around the block so many times I am actually not sure what it was; but it was a change in the setting on my Airport Extreme, and I think maybe I canged the router mode from DHCP (Is that default) to DHCP/NAT - and after that I was able to bring my Airport Express stations online again.... Weird, and far from the tunrkey solutions I have come to expect from Apple regarding internet connections.
    Thanks for helping Bob, althogh I came up with a solution on my own, people trying to help is always very very much appreciated!!
    Best
    Eirik

  • Adding a non-wireless PC to an Airport Extreme network with WDS, or extend

    I have an Airport Extreme base station (802.11n), a Time Capsule, and a cable modem. Currently the Time Capsule is wired by WAN to my cable modem. It is broadcasing a wireless network to my iMac Intel Core2Duo running 10.5.2 and my AppleTV, and my MacBook Pro running 10.4.11. I'd just acquired a Windows XP PC with no WiFi card but a built-in NIC card. I'm having difficulty adding the Airport Extreme base station to the network of the Time Capsule, so the non-wireless PC can use the LAN port of the Airport Extreme and pickup an internet connection. I don't want anything connected to the WAN port of the Airport Extreme. The PC can't be moved to the room with the cable modem. Should I:
    1. Set it up from the Airport Utility of my iMac or MacBook Pro?
    2. Switch the placement of the Airport Extreme and Time Capsule?
    3. What steps should I take from Airport Utility, to add a reset Airport Extreme or Time Capsule to the network already tied to my Cable modem?

    Since both of your base stations are 802.11n, I suggest that you use the "extend a network" feature available to these, instead of creating a WDS.
    1. Set it up from the Airport Utility of my iMac or MacBook Pro?
    Your choice, you could use the AirPort Utility from either of these Macs to configure the base stations.
    2. Switch the placement of the Airport Extreme and Time Capsule?
    I'd suggest leaving the Time Capsule connected to the modem and use the AEBSn to extend its wireless network.
    3. What steps should I take from Airport Utility, to add a reset Airport Extreme or Time Capsule to the network already tied to my Cable modem?
    Here are the basic steps to configure the extended network:
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations. You may also want to temporarily connect the AEBSn directly to one of the TC's LAN ports during setup.
    o Open AirPort Utility and select the TC.
    o Choose Manual Setup from the Base Station menu.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the AEBSn, and again choose Manual Setup from the Base Station menu.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the TC's wireless network from the Network Name pop-up menu.
    o Click Update to update the base station with new network settings.
    o Upon completion of the setup, you can now relocate the AEBSn to its desired location.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

  • Extend AirPort Extreme Network with AirPort Express- Setup assistance

    I have an AirPort Extreme working nicely and connected directly to my Comcast cable modem.  I would like to extend my network for greater coverage upstairs and to run an upstairs printer on the network.  I cannot get the Express connected as an extension to my existing wireless network.  What am I doing wrong? 

    Hi Bob. Do you mind if I listen in on this thread? I am trying to extend a network the same way JVT1057 is, yet my Mac mini in the Airport application cannot find the Express device. The Extreme device is up and working well, and is "seen" by the mini in the utility, but not the Express device. I need a stronger signal in a home office upstairs and would like to connect a networked printer here in the office via the Express.
    What am I doing wrong? I, too, have specifiied on the Extreme menus that I want the network to be extended.
    Thanks in advance for any help you can provide.

  • Extending and airport extreme network with wired connection to a express

    I am getting fed up of deadspots in my house that now seem to have become much worse recently. After giving up on configuring my extreme router to avoid issues I now want to extend the network.
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    I know express routers have an option of extending the network is this for wired or wireless or both and if I do this will it show up as one wireless network with no interference issues?. At the moment I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up should this work okay?
    Many thanks
    Andy

    Welcome to the discussions, Andy!
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    Yes, post back if you need more details about this.
    and if I do this will it show up as one wireless network with no interference issues?
    There will be no interference issues between the AirPort Extreme and AirPort Express. However, if you live in an area with a number of other wireless networks around you, or you have cordless phones, there may well be some interference issues to tackle.
    I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up
    That should work assuming that both ethernet powerline adapters will be on the same master electrical circuit. I would suggest that you get a clear understanding of the store's return policy though...just in case.
    Message was edited by: Bob Timmons

  • Extending Time Capsule wireless network with an Airport Extreme

    Hello - can anyone please advise about extending a wireless Time Capsule network by adding an Airport Extreme?
    I've looked at the Apple support advice - http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US -
    Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) -
    but I couldn't seem to make it work. I don't know if it is different as I'm using Mountain Lion, but I cannot seem to locate a '

    Temporarily, move the AirPort Extreme to the same room or general area of the Time Capsule, power it up, and wait a full minute.
    Then, hold in the reset button on the back of the AirPort Extreme for 9-10 seconds, then release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking amber light.
    Close AirPort Utility if it is open.
    Click the fan shaped AirPort icon at the top of your Mac's screen. Wait a few seconds for the listing of New AirPort Base Station to appear.
    Click on AirPort Extreme just below that and AirPort Utility will open automatically open and analyze your network settings. In the example above, this is shown as an AirPort Express. In another minute, you will see that it will configure the AirPort Extreme to "Extend" the network.
    Enter a device name that you want to use and click Next
    Wait another minute for AirPort Utility to configure the AirPort Extreme. When you see the message of Setup Complete, click Done.
    Move the AirPort Extreme to a location that is approximtely half the distance from the Time Capsule to the area that needs more wireless coverage and power it up.
    You are all set.

  • Having trouble with extending an Apple wireless network with a AirPort Express

    Trying to extend the range of my AirExtreme with a AirExpress:
    I get stuck when the AirPort Utility ask is I'm sure I want to switch networks. if I select switch I loose the AirExtreme. If I select don't switch it take me back to the beginning. Any help will be appreciated.

    You have to "switch" networks to be able to pick up the signal from the Express and configure it with new settings.
    Once the Express is configured it will become part your existing network when you see a green light.
    Then, switch back to your regular wireless network on your Mac and everything will be on the same network

  • How do I maintain my Airport Extreme network with my new Comcast wireless gateway?

    Hi all,
    I've just signed up Internet access through Xfinity. Today, they sent me a new wireless gateway, which I am willing to use. But I would also like to maintain the network I've currently been using, which is an Airport Extreme hooked up to our DSL modem. Currently, I have a Brother wireless printer, our TiVo, and a Roku streaming stick on this network, as well as all of our Macs and mobile devices. I have been reading about "bridge mode," and selecting this mode once my AE is hooked up through the Ethernet cable to our new wireless gateway seems like the way to go if I'd like to keep the AE network I have now. Then, I can select either the new Xfinity network or the AE network, depending on my need. Is that correct? Will I have to reassign all of these peripherals to the AE network once it's been placed in bridge mode, or will they all be able to find that network automatically once the AE is plugged into the new modem/router? Also, is there a way to connect the AE to the new Xfinity equipment wirelessly, or is it best to connect through Ethernet? I have probably betrayed my ignorance more than a few times in this post, so please be kind and explain it to me like I'm a seven-year-old. Thanks in advance for any and all help!
    -B

    Call Comcast and ask them for instructions to configure their "wireless gateway" as a simple modem. Sometimes the terminology they use is "transparent bridging". Have them walk you through it, since all such devices are configured differently. It is usually through a web page but you will need a password to change its settings. You ought to turn off its wireless network also, so ask about that too.
    Then, you will have essentially what you have been accustomed to using: an Extreme connected to a box with an Ethernet cable, doing everything it used to do when you had DSL. Your AirPort Extreme is almost certainly a better router than whatever junk Comcast supplies, and to reconfigure it as a bridge would remove all the features that make it so.
    You probably won't need to change a thing on your Extreme, other than to unplug it and plug it in again after reconfiguring the "wireless gateway".

  • Extending an existing wireless network with an airport express

    My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
    Thanks in advance!

    Welcome to the discussion area, Aaron!
    If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
    The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

  • Airport Extreme network with Ubuntu Linux (7.10), Windows (XP) and MacBook

    Hi all.
    My problem is that I cannot get Ubuntu to connect to Airport Extreme, see the hard disk(s) connected on it and print through it.
    Airport extreme is connected to my adsl modem and I have an Ubuntu PC, Windows PC and a MacBook connected to airport extreme. Windows PC and MacBook work as expected. From the Ubuntu machine I can only connect to the Internet but I can't see the hard disks and printers. I think this is because I provided the modem's IP address to connect to (I chose Static IP in Network Settings and provided the modem's IP as a gateway). When I provide airport extreme's IP address as a gateway I am disconnected from the Internet.
    To use airport extreme on Windows and macbook I used the installation CD, but it will not work on ubuntu. I installed airport-utils but it won't help, perhaps I am doing something wrong.
    Any suggestions?

    I suspect you have already found this out so this reply may simply be for my own memory recall in the future when I have forgotten it.
    To connect to the network drives you need to open the file browser. Then from the Go menu select Network. You will likely see the AirPort Extreme Base Station show up as a cryptic name. Double click on it and you should see the shares.
    For the printer I can't help as of yet since I haven't tried it yet.

  • How do I extend a netgear wireless network with an Airport Express?

    I can get the Airport Express to join the network, but not extend it.  I am trying to extend my network to improve the signal to my Apple TV.  I have read in some places that his can't happen.  I have a Mac as my computer.

    Any idea how to merge the Netgear extender to the primary Netgear network?
    You have a question for Netgear Support here since your question involves two Netgear products.
    This link would be a logical place to start:
    Contact Support - Netgear
    While it is possible that someone on an Apple forum might know how to do this....it is also unlikely that they will see this post and respond. You can certainly wait to see if someone responds here if you wish.....but if it were me, I would contact Netgear about a Netgear question.

Maybe you are looking for