Trying to factory reset

i am trying to do a reset , sold the laptop and would like to wipe it clean , i followed the steps but i get partition file not found , 

Hello @zicarofam,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. 
I understand that your notebook is displaying an error message that the "partition file is not found", and I would be happy to assist you in this matter!
Since the error indicates that the RECOVERY Partition has either been removed or corrupted, I recommend acquiring new recovery media by following this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive. Once you have obtained the necessary recovery discs, you can use this resource on Performing an HP system recovery (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Black screen when trying to factory reset

    Hello guys,
    I'm giò from Italy and I have a problem trying to factory reset my HP Pavilion g6-2338sl with windows 8 preinstalled.
    When I try fatcory reset it I can see the "hp logo and please wait ..." for 5 seconds. Then the screen goes black and I can see the cursor (not flashing). I can move it but nothing else happens. This happens wheter I try to factory reset from windows (starting the hp recovery manager and rebooting the pc), or I press f11 as soon as I power on the pc.
    I dont know how to solve this situation. The pc is unusable and i need to factory reset it.
    May someone help me please?
    thank you

    Please Click here to find the steps involved in performing System Recovery
    If you live in the US, contact HP Here. and If you are in another part of the world, start Here. for phone support
    Hope this helps, for any further queries reply to the post and feel free to join us again
    "I work for Hewlett-Packard"
    * * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
    * * * * * Please mark Accept As Solution if it solves your problem * * * * *
    Regards,
    K N R K

  • I am trying to factory reset my iPhone4 and it says I cannot activate it because the activation server is temporarly unavailble. What does this mean?

    I am trying to factory reset my iPhone4 and it says I cannot activate it because the activation server is temporarly unavailble. What does this mean?

    Troubleshooting activation issues

  • Trying to factory reset iPad w/out password

    Trying to factory reset iPad 2, do not have password and update will not allow it thru iTunes, anyone know how to do this?

    Force iPad into Recovery Mode.
    http://support.apple.com/kb/HT1808

  • My Motorola droid razr M is stuck at the M logo and i tried the factory reset but it didn't work. What do i do?

    My Motorola droid razr M is stuck at the M logo and i tried the factory reset but it didn't work. What do i do?

        MrMJG,
    Let's get your phone back up and running. Have you been able to try to press and hold the volume down and the power button at the same time for approximately 10 seconds? The phone should reboot for you. Is there any kind of physical or liquid damage to the device? Please keep me posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • I am trying to factory reset my computer hp 255

    I am trying to factory reset my hp 255 g1 laptop. how can i do this?

    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
    HP 255 G1 Notebook PC Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Trouble trying to factory reset from recovery (D:) drive

    Hey,
    I'm in a bit of a predicament.  The Vista cd key on the bottom of the laptop has, of course, worn away and is mostly unreadable at this point and it was never written down.  Also, there were never any recovery DVDs burned and I am no longer able to boot into windows so burning them now is not an option.
    I've tried to use the recovery D: drive to do a factory reset/re-install of Vista.  It seems to work most of the way- it does the step where it is formatting the C: drive, and copying files.  It then reboots and it sort of looks like it is starting to re-install Vista but then at some point I get an error along the lines of "the NLS files are missing".  So it seems like the recovery drive isn't quite right.
    My first thought was to see if HP still provided recovery DVDs for a small fee, but of course they seem to be discontinued (laptop is a Pavilion dv4-1435dx with Vista premium home 64-bit).
    It seems like my 3 options going forward are:
    1) pay upwards of $100 for a new copy of Vista (really makes me angry that I would be buying something I already bought...)
    2) try to buy a recovery disk from a 3rd party retailer (I'm afraid to do this as some of them seem to suggest I would need my own cd key at some point, which again is not readable off the bottom of the laptop).
    3) pray that there is some way to get the recovery D: drive to work as it should.
    I'm hoping someone here can help me persue option 3).  I don't understand why the D: partition isn't working as it should- I mean, it's there to do exactly what I am trying to get it to do!  Is it common for the D: partition to just not work?  If so, it seems like that and the combination of easily worn cd keys on the bottom of laptops is a pretty shoddy product from HP...
    If 3) is a no go, does anyone have experience with 3rd party recovery discs?  Do they require a cd key to be input even if they are being used on a laptop that has one of these pre-installed licenses and are just doing a factory reset?
    Thanks for any and all help!

    I've just been assured by a rep at their website that this will work for me:
    http://www.computersurgeons.com/p-17082-recovery-kit-578918-001-for-hp-model-number-dv4-1435dx.aspx
    They claim that the cd key will be automatically read from the MOBO so I will not have to manually type it in during installation.
    I guess ~$30 is the price I will pay for not having recovery discs burnt when I still had access to windows.

  • Trying to factory reset my laptop

    Hello, I am trying to reset my laptop to factory settings, I watched a video by HP on how to do so, and I followed it, went to the HP recovery manager and went to click 'system recovery' and saw this "system recovery restore your computer to its original factory condition (disabled: recovery partition is removed)" I'm not sure why it wont let me, I am running Windows 7 64-bit on an HP-2000 laptop, any help would be appreciated, also yes, I have my personal files saved to a flashdrive, thank you

    Hi,
    It clearly says "(disabled: recovery partition is removed)" that means at one point you or someone else remove the Recovery partition. You have to contact HP to order a set of dics's.
      http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07143
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Trying to factory reset an Iphone 6..

    This phone was dropped in the water...and instead of waiting for it to "dry-out", I purchased another for my daughter. Well, now that it's working...I would like to use it for myself.  The problem: well, she forgot the e-mail associated with the I-tunes account for this phone and also the password.  Was told if I can't get into that account...the phone is useless! She has a new I-tunes account with her new phone...is there anyway to access, or find out any info through the new one?

    Need help.. wrote:
    Was told if I can't get into that account...the phone is useless!
    Basically, yes.
    Start here:
    https://iforgot.apple.com
    You may also have some luck if you have the original receipt. Apple may be willing to unlock it for you.

  • I'm trying to factory reset my ipod 5th gen on my mac

    I have already looked up the steps on youtube and what not but none really specify my situation.
    I have the ipod in DFU mode and when I click restore on itunes it opens up the files on my mac and I haven't backed up my ipod on my mac before what do I do or click on?

    Try:
    Restore ipod button in iTunes gives open file dialog - HELP!

  • E3200 quit working, I already tried factory reset, out of ideas...help please?

    I've had the E3200 for 3 weeks now and it has been running perfectly until last night. It's broadcasting its SSID and when I open network properties on my computer, it says I'm connected to the internet. However, when I troubleshoot with windows and cisco connect they both recognize that I'm not connected to the internet. Tried with 2 other laptops, an andriod phone, and an iphone with the same results. I live in an apartment building and the only thing we need to set up is a router for wifi (modem   connection is taken care of in the basement) so there's no issues with a modem because the other tenants have internet, and when I connected my laptop directly to the wall I had internet access so I'm pretty certain it's an issue with the router. I tried a factory reset and went through the installation again but had the same result as before. I called customer support but they had me on hold until I had to leave for class. HELP PLEASE!

    You may need to reconfigure the router. What is the IP address that your computer is getting if it’s directly connected to the wall? If using the setup cd to reconfigure the router didn’t work, try doing it manually. These links will guide you thru in doing the reconfiguration manually: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection.

  • Did a Windows 7 reinstall, now I can't factory reset to get drivers (p775)

    My satellite p775 bricked after randomly restarting it last week. I tried to factory reset it but it hung up several times during the reset. So I took somewhere to be assessed and it was determined that the problem was a software malfunction. I had a fresh Windows 7 reinstalled and now it works perfectly.
    However, I don't have any of my drivers. I figured I could factory reset it now without problem to install all those drivers again but when I go to do it, I don't have the option. I went on Toshiba's website to download the drivers manually but I don't know where to start. I'm not the most computer savy person. I wanted to factory reset it because it's easier and it installs all the drivers I was used to having before it bricked. Any advice?

    Hi! I know what you mean. I really like all the Toshiba features. I have used my recovery CD's (5 of them) to restore back to factory one time. It worked pretty much without a glitch. I think I had to eject and reinsert one of the CD's, but it went back to factory and everything restored back to factory settings. I sense then have created a flash drive with factory restore on it. Haven't had the need to use it, but makes me feel good knowing I have it in a drawer I guess if you want the Toshiba restore to factory, you will have to order it from Toshiba. I supplied the link in my first reply. We learn from our mistakes and some times we have to pay the price. I'm very happy with my Toshiba PC. I joined this forum to pass forward what I have learned about my Toshiba. Good luck. The CD's will cost you 30$ shipping
    Here's a nice Toshiba feature
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture49.JPG ‏199 KB

  • Help Factory Resetting!!

    Hello, Recently i have tried to factory reset my Compaq Pressario PC SR5710Y. Every time it gets to 48% a message appears saying "error 1005. If the error persist contact HP Support" and im wondering what can i do about this problem.

    Hello jack867!: since you can't get your machine's recovery past 48%
    hopefully you either have Master Recovery media ordered from HP
    2. Made Recovery Media from Recovery Manager included in the computer
    try again by detaching all your hardware that's attached except your rodent & keyboard & follow what you see on your screen
    because it's likely that the partition is damaged
    in c.40 minutes you should have a normal desktop
    immediately run scandisk  to see if there's no latent HD issues lurking
    3.  if you own a full fledged retail copy of Windows in addition to doing the aformentioned
    go to the Web page pertaining to the model model & download all the drivers that are part of your computer following what ever you see on the web bage
    good luck
    hope this helps
                                                                                                                          spacechild

  • Trying to factory restore my t420

    trying to factory reset my t420 with rnr but its not working i select full restore and it reboots in a windows 7 recovery mode after i get out of rnr and i cant seem to get it to format and launch install can anybody help me.

    If you are facing troubles with factory recovery using R&R prepare factory recovery media using Lenovo applet (bootable USB stick with data) and perform that recovery operatoion from external media.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • AEXPR N: no configure, no factory reset

    Hi all,
    This is a weird one. Today I bought my 6th AEX in succesion, my first N. I configured it to join my AEXTR N network and that worked ok, but now I'm not able to administer the AEXPR from the Airport-configuration utility. It shows up in the list and the light is green, but it just times out when I try to connect. I noticed it when I tried to update the firmware to 7.3.1.
    So I tried a factory reset: unplug, press reset button, plug in, while keeping the button pressed, wait for the green light to blink four times, release. But that also doesn't work as documented.
    When I plugin the AEXPR with the reset button pressed it starts with a second of green, then ± 4 seconds of amber and then it start flashing amber for a minute. After about a minute the light goes off, until you release the reset button. It start booting as normal, and shows up in the list of devices of the Airport-configuration utility. But still no way to connect...
    Should I return the thing as Doa, or does one of you have a magic trick to offer?
    Thanks!
    Jan David

    I'm getting the same light sequence with my Airport Express. Any thoughts out there? I can't get it to reset. 8-(

Maybe you are looking for

  • Macbook will not boot, stays on gray screen no apple logo

    I was in the middle of watching some streaming content in netflix when my macbook froze. I tried to force quit, but to no avail, so I forced shut down. When I press the power button to reboot, I hear a couple of clicking sounds like the fan is trying

  • PO Query report

    Hi Guys I wanted to created my own Purchase order report (EKPO, EKBE) with vendor, how do I link it to the vendor? Pls advise.

  • Error in JMS receiver channel - XI - Weblogic

    Hi Experts We are also having the situation that we are sending messages from XI to Weblogic server with the help of JMS Adapter. The Queue is available in Weblogic server. Our configuration of JMS receiver Adapter is JNDI Lookup Name of Queue Connec

  • Table authorisation not working in RSA3

    Hi All,    I come across a problem, I have linked a R/3 table to an authorization group so that its data will be viewable to only those who are authorized for that group. Its working fine when anyone tries to view the data from SE16. But in case i ha

  • Deactivate "Detailed Navigation" in an iView?

    Hi there, just a little question. I created a new URL iView and put it in to the toplevel Navigation. Thats works fine. But when i open the iview over my menu always the detailed navigation is displayed on the left side... where can i deactivate the