Trying to figure out how to play music videos continuously

I am trying to figure out how to play the music videos in the videos app on an Ipad2

Continuously**

Similar Messages

  • Trying to figure out how to use a video's alpha channel to define its hitspace for a button

    Hello, I'm trying to figure out how to use a video's alpha channel to define its hitspace for a button. I would greatly appreciate anyone's help with this.

    Currently I'm doing an image sequence inside of a movie, and putting the movie in the button. I hope that's what you're asking. Not sure if I entirely understand your question. (Been a little while since I used the interactive side of Flash)
    Anyway if you have a specific process that you personally do that works I'd happily conform to your solution.

  • Trying to figure out how to put music below like a DJ

    I've been trying to figure this out but can't seem to find anything.
    Here's what I'm trying to do...
    I have a spoken voice track. Below that, I want to add a music track that follows at X decibels below the voice - but when the voice pauses the music automtically jumps up to fill the dead space.
    Is this possible to do/automate in Soundtrack Pro?
    Thanks.

    The process you're referring to is called "ducking." Interestingly enough, it is fairly easy to automate using an old analog compressor/limiter, but I have yet to see a software solution.
    I manually keyframe the Compressor/Limiter settings to duck the music track when needed.
    -DH

  • Im making a slide show on Aperature and Im trying to figure out how to add music to it.  Does anyone know how to do this?

    I need to add music to my slideshow on aperature, can anyone help me with this?
    Thanks.

    There are basically two methods to add music to a slideshow.
    The first method, that Frank Caggiano described, will let you set a background sound track, that will play during the whole show. You will see your background clip fill the filmstrip with a green shadow.
    A second method is, to drag short sound clips directly onto single slides - this will let you add special sound effects at certain moments and will result in secondary audio tracks, that you can adjust in length. These secondary tracks are displayed as thin bars below the slides. (a screenshot from the User manual)
    See this section in the user manual for more detail:
    Adding Music and Audio to Slideshows
    Regards
    Léonie

  • Hi - Re Keynote  I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc.  Is this possible with Keynote ?

    Hi - Re Keynote  I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.  
    Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
    Gav 88

    Hi there,
    Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
    http://forums.adobe.com/community/encore
    Sorry not to be of more specific help to you. Best of luck!
    Kind regards,
    Rebecca

  • Trying to figure out how to change the tuning of certain notes so I can play notes in between pitches for example the middle note between B

    Trying to figure out how to change the tuning of certain notes so I can play notes in between pitches for example the middle note between B & C or E & F. I can use different tracks if needed but I would prefer to know how to do it for individual notes as well. They have to be exactly in the middle so it's not out of tune.

    Danny,
    The theme to Doctor Who is in 12/8. In music theory, there's no such thing as a 12th note, the notation and nomenclature is all based on things being divisible by four. So for the diddly-dum feel to happen, you have to give the beat to a quarter note plus another eighth note -- we call it a dotted quarter note, and now you have three eighth notes per beat so you can go diddly. So, since you can't call the time signature 12/dotted quarter, you call it 12/8 and go faster. Make sense? Anyway, for GB's purposes, all you need to know is that you'll get that feel by choosing 12/8.

  • I'm trying to figure out how to add my music to my iTunes Library..?

    I have an iPod Classic, almost full of music... I'm trying to figure out how to add my music to my iTunes Library (so I can then sync with my iPhone). When I try to sync, it gives me an alert: Are you sure you want to sync? All existing content will be removed and replaced with songs from your iTunes Library. How can I add my songs? I don't mind backing my files up and restoring my iPod, but I can't even find how to do that. Please help?! Thanks.

    Are you using Mac or Windows?
    With Mac you can click file on the top left, on the dropdown box 'Add to Library...'
    With Windows you could have the folder with the music in open, and simply drag it into iTunes.
    Or simply stick the CD into the computer and let it do it's work
    If you want to backup, it should already do it for you, then once your iPod has been restored it lets you choose from the backups that iTunes has created. That's just me though it may not be the case for you.

  • I am trying to figure out how I can get my library transferred to the Honda Accord 16gb hard drive?  I have purchased music of off I tunes and do not have the physical CD.  Anybody with any suggestions on how this can be done?

    I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive.  The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes therefore not having the original CD.  Can someone help me with this as I dont want to load each CD into the player to record and have some albums that I purchased off of I tunes that I would like to be on the hard drive.
    Thanks Any Help is appreciated.

    If Honda says you need the original CDs, you need the original CDs.

  • I rented a movie and can't figure out how to play it

    I rented a movie and can't figure out how to play it. It does not appear in my movies and does not have a play button on the main movie screen.

    This should help.  Presumably you have not tried to move your movie to some other device as it can only be on one device at a time.  Also, presumably you allowed it to finish downloading.
    http://support.apple.com/kb/PH12136

  • How can you tell how much space is being used up by your iTunes...I am trying to figure out how much space I will need to transfer my iTunes library to an iPod and which iPod to select?

    How can you tell how much space is being used up by your iTunes...I am trying to figure out how much space I will need to transfer my iTunes library to an iPod and which iPod to select?

    Start up iTunes, and select Music, then click Songs.
    Down at the bottom of the iTunes window, it will tell you how much space your library occupies.

  • Hi, I have a Apple TV and we are trying to figure out how to transfer the iPad to our tv. Any ideas? Thanks

    Hi, I have a Apple TV and we are trying to figure out how to transfer the iPad to our tv. Any ideas? Thanks

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    Apple - AirPlay - Play content from iOS devices on Apple TV
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    iOS: About Apple Digital AV Adapters
    http://support.apple.com/kb/ht4108
    Look at the Apple TV manual
    http://support.apple.com/manuals/#appletv
     Cheers, Tom

  • I am trying to figure out how to merge my AD network account.

    I am trying to figure out how to merge my AD network account with my Mac account. The main reason for this is wanting to log into my admin account on the Mac, and have it also log into my network account so I do not have to log into differing accounts depending on wether I am on the network or not. And I am going to be running VMware fusion with windows on top, so having one account would be essential to this.
    Thanks.
    P.S. I am brand new to Apple, not by choice. ;-)

    Basically I want to link a network account to a local account, so that I always log into the same account, even if I do not have network access....

  • Can't figure out how to sync music to ipod touch

    Can't figure out how to sync music off my computer to ipod touch.

    Go to iTunes>Help>iTunes Help>Sync your iPod, iPhone, or iPad

  • I recently set up multiple accounts and when I was trying to figure out how to share files I messed up something in my documents. Everytime I open a doc from the ADMIN account, a box pops up that says "The file is not in the correct format" how to fix?

    I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?

    Without knowing what you did it is impossible to give advice on how to correct it.
    If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
    Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive.

  • I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

    I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

    Hi olivias,
    It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
    How to change the default application for a file type | Macworld
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Please let us know if you have additional questions.
    Best,
    Sara

Maybe you are looking for

  • Delete Intransit from APO which Loaded by PI from external interface

    Hi all, I am facinf a problem in deleting the Order created by External Interface. We are loading Inransit as PO Mamo (ATP Category AH). Now we need to delete all the Record with AH ATP categoy before we reload new intransit to APO. Problem is we are

  • Error while trying to access RSA1 in SAP NETWEAVER 2004 S

    HI friends,             i am working on SAP NETWEAVER  2004s  and have created a few open hub destinations in this and when i tried to delete a  few , system is showing an error " Destination Type is not Supported"  when ever i am trying to access RS

  • Another site using Apple s name,

    i was on my i pad when I received an e-mail telling me that I had won a new Galaxy tablet as I used an Apple product to sign into Facebook frequentl,it told me to pay £1 towards the postage and that would be sent out to mew,,so I never done anything

  • Web Gallery Improvements

    I would like to see the ability to export different galleries from lightroom, right now you are limited to exporting what is in the film strip. It would nice to be able to create a collection ie Landscape, Nature etc and upload those pics to your web

  • Convert Flex project to Creative Suite Extension Project

    Hi, I would like to know if there is a way to convert an existing flex project written in as3 to a Flash Pro Creative Suite Extension Project so we can debug it? Its a large and complex project and we would rather not start it from scartch