Trying to figure out if I have a Gigabit Ethernet card
I'm trying to figure out if I have a gigabit ethernet card - currently, it's operating at 10x slower but I was told that sometimes it can be switched to Gigabit in the settings.
If not, what kind of card should I get?
Thanks!
If yours is a Mac Pro 65lb tower, it has two Ethernet ports, each of which can run at up to Gigabit speeds.
The equipment you connect to must also be capable of Gigabit speeds, but if you have a separate Router and Switch, only the Switch needs Gigabit capability.
The cables you use must have Eight conductors and Eight gold contacts present.
Similar Messages
-
Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.
Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such. -
I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive. The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes therefore not having the original CD. Can someone help me with this as I dont want to load each CD into the player to record and have some albums that I purchased off of I tunes that I would like to be on the hard drive.
Thanks Any Help is appreciated.If Honda says you need the original CDs, you need the original CDs.
-
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
I accidentally bought the HD version of a movie for my daughter's nano. you can't watch HD on a nano. So I'm trying to figure out how to re-download the SD version. This help screen makes it seem like you can just correct the problem and just "download" the lower version. But when I follow the steps, I basically get to where I'm just having to actually purchase the other version. Do I have to pay to get the lower quality version after I've already paid for the HD version?
When you purchase an HD movie or show, in most cases the SD copy can be downloaded from your purchases area in iTunes. On the main iTunes Store page, go to Purchases under the Quick Links and then select Movies or TV shows as appropraite. Click the "Not On This Computer" button. Uncheck the "Download HD when available" box and you should then see the SD copies of the movies/shows and be able to download them.
Note that with digital copies from a Blu-Ray or DVD, if it comes with an HD copy, you normally cannot get the SD copy as well and have to purchase it separately if you want it.
Regards. -
I have creative cloud, I have photoshop and lightroom current versions installed - I was using the trial period. I paid for the 9.99 a month and now I'm trying to figure out how to update this.
You need to uninstall the trial applications and reinstall from the CC app.
-
I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out how to get itunes to recognize the photos on my phone. This has never happened before.
Have you tried to reset the iPhone and tried again to import?
To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -
how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.
Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. -
I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?
Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it. -
The messages on my Iphone and Mac don't match, My Mac is lacking messages. Do they only show if the sender has an iPhone, trying to figure out if thats what the missing names have in common, or if it a different problem?
Messages on the mac will only show iMessages sent from an iPhone, another mac, iPad etc etc...
It won't show SMS / Text messages.
If the messages are green on your iphone then they are text messages... Blue are iMessages -
Trying to figure out pricing and plan options to add multiple computers to current subscirption. We currently have a subscription that allows the programs on two computers, but now I need 5 computers to be updated with CC. Have looked in to Small Business teams, but do not understand how many computers that is good for and if there is a professor or previous customer discount. Any help would be great, thanks!
Hi,
I presume that the new configuration is missing some parts as you seem to have the IP address of the external interface configured staticly on the interface but you have not configured any default route on the firewall? (Original configuration got default route dynamically and added it to the routing table)
You also mentioned that you were able to connect to the Internet which would indicate there was indeed a default route with the new configuration?
I am a bit confused about the host mask on the external interface (/32 - 255.255.255.255) ? Does the ASA really let you configure a host address on the interface? It can't lead anywhere as there is no next hop with a host mask. I think the ASA even blocks using a /31 mask link network which works with Cisco Routers.
I guess I would go through the basic troubleshooting step when the new configuration is in use
Check logs for any blocked connections or error messages
Check the Static PAT (Port Forward) configuration with the "packet-tracer" command
Capture traffic on the ASAs external interface (with the ASA itself) and confirm that you are seeing the TCP SYN of any connection attempts, or perhaps capture ICMP
- Jouni -
Hi, I have a Apple TV and we are trying to figure out how to transfer the iPad to our tv. Any ideas? Thanks
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
Apple - AirPlay - Play content from iOS devices on Apple TV
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/ht4108
Look at the Apple TV manual
http://support.apple.com/manuals/#appletv
Cheers, Tom -
I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I am trying to figure out why info in the body of a calendar appointment does not show up on the iPad. The appointment shows up, but not the notes I had added. Does that info get pushed and if so what setting am I missing?
If Honda says you need the original CDs, you need the original CDs.
-
My sibling was messing with my ipod touch and trying to figure out my passcode. Now it is disabled. I tried connecting it to Itunes, but that didn't work. Itunes kept telling me to enter my passocode. Any suggestions?
omg the sixth time i did it it worked jeeej
thank you very much guys <3 xD
Maybe you are looking for
-
HP LaserJet Enterprise 500 color MFP M575 control panel display
HP LaserJet 500 color MFP M575 have no Display. and is not anymore possible access any function. What is the problem behind that ?How can we solve this issue ? is it the problem with the control panel display or the logic board ? there is no dim mem
-
Hi, my Servlet computes a request (doGet()-method) with some parameters (e.g. http://myApp/test?param=Hello). Then it forwards to another servlet/jsp: request.getRequestDispatcher("/mySite").forward(request, response); But before forwarding, I want t
-
Greetings..... During T code of VA11 (change Enquiry ) while issueing OUtput , i m getting the error as ' Value of spool attribute cannot be changed. Message no. SSFCOMPOSER033 Diagnosis The spool attribute has the value . This
-
Security Realm class for agentRealm in Sun App server 8.1
hi All, Can someone tell me what the name of the agentRealm class is for configuring agentRealm in Sun app server 8.1. The Policy agent Guide for App server 7 has it as the following <auth-realm name="agentRealm" classname="com.sun.amagent.as.realm.A
-
Start up disk full and I don't know how to look at what is filling it up
Hi, I have 2 questions. My start up disk is full and I deleted a whole bunch of stuff and it didn't help. How can I see what is taking up all the space? I only have stuff in Documents (nothing in pictures, movies, desktop) and it isn't alot of stuff.