Trying to figure out this setup...

I currently have an Airport Express (AX) from a few years back. I'm interested in getting the new Airport Extreme (AE) for improved range and speeds, guest network, etc.
My cable internet enters my house right by my home theater. So, I have the modem there plugged into my AX. My Mac across the room gets wireless from the AX (along with our iDevices), and sends Airplay back to the AX which is connected to my stereo.
If I put in an AE after my modem, it will then put out the network for my Mac, and I will have my AX right next to it for Airplay. Does it make sense to have the AE and AX next to each other? Is there any easier way to setup Airplay? I feel like it's a waste to have the AX right there, rather than using it somewhere else in the house to extend the network, but I can't figure out a better setup.
Thanks for any and all help!!!
Brian

Do you mean connect the AE and AX via ethernet?
Yes
Is Airplay then going through the AE to the AX?
AirPlay goes through the main router first before it reaches the AX, no matter whether you are using wireless or Ethernet to connect.
Will the wireless on the AX then be disabled somehow, since the AE will be putting out the network?
There's no reason to have two routers that are close together both putting out a wireless signal, so the wireless on the AX would be disabled to avoid the potential for wireless interference that is likely to occur when two wireless routers are in close proximity.

Similar Messages

I keep getting different errors when i try to upgrade why? i have been 5 hours trying to figure out this ? im soo freaked

help please.
im on firmwere 4.3.5 im trying to go up to 5.0...

Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it. Your problems may be caused by the installation of the version of DirectX you installed. Uninstall the one you installed and see if you
still have the errors.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Trying to figure out this error

I have a Flex website that I created and I'm getting the
following error when I try to call to my ColdFusion RemoteObjects:
[RPC Fault faultString="Send failed"
faultCode="Client.Error.MessageSend"
faultDetail="Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Failed: url: '
http://reevespro.com/flex2gateway/'"
I haven't a clue where or to fix. And I have no idea why it's
trying to call flex2gateway, the directory doesn't exist. Anyone
have a clue?
Thanks

Hi,
If you are using the ColdFusion adapter for BlazeDS/LCDS,
please open remoting-config.xml and see which channel your Remoting
destination is using. In services-config.xml, you should be able to
find channel used above configured. You should be modifying the end
point URL of the channel.
Hope this helps.

Dreamweaver Newbie making first site. Trying to figure out this CSS thing...

This is my first attempt and first site with DW and am having some newbie issues. The website is www.accuvisionvideo.com. The site is based on a DW template I picked up from a website. If you go to the page you will see a menu on the left hand side and the body of the page mostly in the middle. I am using Studio VII pop menu magic for that menu. I want to make the thing horizontal, but still keep the side bar area (the photos and such underneath the menu) However when I make the menu horizontal it removes everything from the left side space and does not give me the option to work in there any more. How do I place images and text in the left column? If I am not mistaken its a CSS thing...Also is there anyway to place images anywhere on the page. Now when I insert an image it seems to have to be either fltlft or fltrt, I can't put multiple images on the same line?   Anyway I know these are noob questions, thank for any help guys.

GasMaskProductions wrote:
This is my first attempt and first site with DW and am having some newbie issues. The website is www.accuvisionvideo.com. The site is based on a DW template I picked up from a website. If you go to the page you will see a menu on the left hand side and the body of the page mostly in the middle. I am using Studio VII pop menu magic for that menu. I want to make the thing horizontal, but still keep the side bar area (the photos and such underneath the menu) However when I make the menu horizontal it removes everything from the left side space and does not give me the option to work in there any more.
The PVII menu will insert into any div on your page. What you need to do is create a brand new div just below your header div and insert the pvii menu into that div. This way the new div won't take any styles from any of the current div styles on the page.
How do I place images and text in the left column? If I am not mistaken its a CSS thing...Also is there anyway to place images anywhere on the page. Now when I insert an image it seems to have to be either fltlft or fltrt, I can't put multiple images on the same line?   Anyway I know these are noob questions, thank for any help guys.
If the images are too wide, they will drop down to the next line (like the images at the bottom of the entry page now.)
the fltlft and fltrt,are classes, that float and image to the left or to the right, so you can have text surrounding the image.
Also, for such a simple page you have over 78 errors when you put the page throught he html validator:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.accuvisionvideo.com%2F
The majority of them will certainly need fixing before creating any further pages using a similar layout.
Just notice this also:
.style5
                                    font-family :
                                    "Charlemagne Std";
                                    font-size :
                                    xx-large;
                                    color :
                                    #000000;
That's not a web-safe font, if someone doesn't have that on their system, they will not see that font, they'll be served the default font
of their browser set.
More about Web Safe Fonts:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/

Can you figure out this setup? Snow Leopard and Windows 7...

Here's my potential rig:
- Running a Mac Pro.
- 2 Hard Drives:
1) Snow Leopard on first drive
2) Windows 7 on second drive
- 2 24" Apple LED Cinema Displays
So here's my question...is there a way I can have both OS's running at the same time, with Snow Leopard on the left monitor and Windows 7 on the right monitor, all running out from one computer rig (Mac Pro)?
I've heard of ppl using Synergy to run dual monitors with dual computers and sharing one keyboard and mouse. I want to do the same EXCEPT run it all out of 1 computer.
Any advice, suggestions, critiques?
Thanks!

You'll have to rely on virtualization there. Check out parallels or VMWare Fusion. I think both companies provide evalauation versions. There's also Sun's free VirtualBox that you might want to give a try. A virtual windows installation won't perform as well as a boot camp installation in all situations
Cheers,
Jazz

I am trying to figure out how I can get my library transferred to the Honda Accord 16gb hard drive? I have purchased music of off I tunes and do not have the physical CD. Anybody with any suggestions on how this can be done?

I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive. The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes therefore not having the original CD. Can someone help me with this as I dont want to load each CD into the player to record and have some albums that I purchased off of I tunes that I would like to be on the hard drive.
Thanks Any Help is appreciated.

If Honda says you need the original CDs, you need the original CDs.

My iPhone 4S is not showing up in iTunes. I've never had this issue before, but I'm finding it a little frustrating trying to figure out how to rectify the situation. Any suggestions would be greatly appreciated.

My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.

Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

I am trying to figure out how to clear my massage backlog of messages on Messages for Mavericks OS. I believe a lot of space is taken up by this running in the background keeping recent messages loaded. Especially with all the gif files I've been sending

I am trying to figure out how to clear my massage backlog on Messages for Mavericks OS. I believe a lot of space is taken up by this running in the background keeping recent messages loaded. Especially with all the gif files I've been sending. Is there a way to select all and deleter? Please help! Can't find anyone who looks to do the same just lots of manuals for using the app on iphones and ipads.
Thanks

I am trying to figure out how to clear my massage backlog on Messages for Mavericks OS. I believe a lot of space is taken up by this running in the background keeping recent messages loaded. Especially with all the gif files I've been sending. Is there a way to select all and deleter? Please help! Can't find anyone who looks to do the same just lots of manuals for using the app on iphones and ipads.
Thanks

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

Been using Macs since classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents (Name, Date Modified, Size Kind) of entire (non-visible) folder? Any apps that can do this?

Been using Macs since before classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents including what's not visible on screen (Name, Date Modified, Size Kind) in entire folder?
Screen shots are getting old hat.
Tried select all, copy, paste into pages, but it didn't display date modified, size & kind, and also included images of selected files, which is too large.
Any apps/shortcuts/utilities that can do this? Thanks in advance.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Os7 granddaughter has disabled my phone trying to figure out password how do I fix this.

Just updated to OS7 with a password. 4 yr old grand daughter ear just disabled my iPhone trying to figure out the password. I can only make emergency calls!!! How do I fix my phone?

iOS: Forgotten passcode or device disabled after entering ... - Support

Trying to figure out what's using my RAM

A couple of weeks ago I starting to notice that my memory was getting chewed up slowly until I'd hit around 20MB remaining. the only way that I could free up the space is through 3rd party memory utilities such as FreeMemory. It appears on further inspection memory appears to go inactive, but this isn't very healthy, yet very odd, so I'm trying to figure out if there's a memory leak somewhere.
Any help would be wonderful. Below is my Etracheck log. I've attempted to remove alll external hard drives and other devices connected via either thunderbolt and USB with no change. Rebooted a few times however the memory gets eaten right up again.
My initial thought was that it's somehow VMWare however my Windows 7 instance is running at a fixed rate, and even with the instance shut down, my computer would still eat up any available memory.
Thank you!
Hardware Information:
    iMac (27-inch, Mid 2011)
    iMac - model: iMac12,2
    1 3.4 GHz Intel Core i7 CPU: 4 cores
    16 GB RAM
Video Information:
    AMD Radeon HD 6970M - VRAM: 2048 MB
System Software:
    OS X 10.9.2 (13C64) - Uptime: 0 days 19:6:22
Disk Information:
    ST31000528AS disk0 : (1 TB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (609.08 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information:
    HP External HDD 2 TB
        HP SimpleSave (disk8s1) /Volumes/HP SimpleSave: 2 TB (202.96 GB free)
    Western Digital Ext HDD 1021 2 TB
        WD (disk6s1) /Volumes/WD: 2 TB (683.89 GB free)
    Initio   WD20EARX-32PASB0 2 TB
        EFI (disk2s1) <not mounted>: 209.7 MB
        disk2s2 (disk2s2) <not mounted>: 2 TB
        Boot OS X (disk2s3) <not mounted>: 134.2 MB
    Initio   WD15EARS-00Z5B1 1.5 TB
        MUSIC (disk1s1) /Volumes/MUSIC: 1.5 TB (347.84 GB free)
    Western Digital Ext HDD 1021 1 TB
        Elements (disk5s1) /Volumes/Elements: 1 TB (119.86 GB free)
    Seagate FreeAgent 500.11 GB
        EFI (disk4s1) <not mounted>: 209.7 MB
        FA (disk4s2) /Volumes/FA: 499.76 GB (350.5 GB free)
    Western Digital My Passport 0748 1 TB
        My Passport (disk7s1) /Volumes/My Passport: 1 TB (710.73 GB free)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. iPad
    Brother MFC-495CW
    Logitech USB Receiver
    Logitech USB Receiver
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
    Apple Inc. thunderbolt_bus
Configuration files:
    /etc/hosts - Count: 30
Kernel Extensions:
    com.kaspersky.kext.klif    (3.0.3a40)
    com.kaspersky.nke    (1.6.3a13)
    com.logmein.driver.LogMeInSoundDriver    (1.0.0)
    com.splashtop.driver.SRXDisplayCard    (1.6 - SDK 10.7)
    com.silex.driver.sxuptp    (1.5.1)
    com.splashtop.driver.SRXFrameBufferConnector    (1.6 - SDK 10.7)
    com.kaspersky.kext.kimul.44    (44)
    com.kaspersky.kext.mark.1.0.5    (1.0.5)
    com.regularrateandrhythm.driver.RowmoteIREmu    (1.0)
    com.tuxera.filesystems.tufsfs.fusefs_txantfs    (2012.4.17)
    com.vmware.kext.vmci    (90.5.7)
    com.vmware.kext.vsockets    (90.5.7)
    com.vmware.kext.vmnet    (0133.15.45)
    com.vmware.kext.vmx86    (0133.15.45)
    com.vmware.kext.vmioplug.12.1.12    (12.1.12)
Launch Daemons:
    [System]    com.adobe.fpsaud.plist 3rd-Party support link
    [System]    com.adobe.SwitchBoard.plist 3rd-Party support link
    [System]    com.bjango.istatmenusdaemon.plist 3rd-Party support link
    [System]    com.disc-soft.DAEMONTools.PrivilegedHelper.plist 3rd-Party support link
    [System]    com.google.keystone.daemon.plist 3rd-Party support link
    [System]    com.kaspersky.kav.plist 3rd-Party support link
    [System]    com.logmein.logmeinserver.plist 3rd-Party support link
    [System]    com.logmein.raupdate.plist 3rd-Party support link
    [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
    [System]    com.oracle.java.Helper-Tool.plist 3rd-Party support link
    [System]    com.parallels.desktop.launchdaemon.plist 3rd-Party support link
    [System]    com.splashtop.streamer-daemon.plist 3rd-Party support link
    [System]    com.teamviewer.teamviewer_service.plist 3rd-Party support link
    [System]    com.timesoftware.timemachineeditor.backupd-auto.plist 3rd-Party support link
    [System]    org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
    [System]    xxx.qnation.PeerGuardian.kextload.plist 3rd-Party support link
Launch Agents:
    [System]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [System]    com.Affinegy.InstaLANa.plist 3rd-Party support link
    [System]    com.bjango.istatmenusagent.plist 3rd-Party support link
    [System]    com.google.keystone.agent.plist 3rd-Party support link
    [System]    com.kaspersky.kav.gui.plist 3rd-Party support link
    [System]    com.logmein.logmeingui.plist 3rd-Party support link
    [System]    com.logmein.logmeinguiagent.plist 3rd-Party support link
    [System]    com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
    [System]    com.oracle.java.Java-Updater.plist 3rd-Party support link
    [System]    com.parallels.desktop.launch.plist 3rd-Party support link
    [System]    com.parallels.DesktopControlAgent.plist 3rd-Party support link
    [System]    com.parallels.vm.prl_pcproxy.plist 3rd-Party support link
    [System]    com.splashtop.streamer-for-root.plist 3rd-Party support link
    [System]    com.splashtop.streamer-for-user.plist 3rd-Party support link
    [System]    com.teamviewer.teamviewer.plist 3rd-Party support link
    [System]    com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
    [System]    net.culater.SIMBL.Agent.plist 3rd-Party support link
    [System]    org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
    [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
    [not loaded]    com.eltima.Folx.Agent.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac.trashSizeWatcher.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
    [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
    [not loaded]    com.valvesoftware.steamclean.plist 3rd-Party support link
    [not loaded]    ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
    Adium
    Firefox
    Thunderbird
    Vidalia
    [PC ~ Multi9] Football Manager 2010.iso
    iTunesHelper
    MagiCal
    Connect360Helper
    Kodak EasyShare Wireless Listener
    GrowlHelperApp
    Microsoft Database Daemon
    Weather Vane
    VMware Fusion Helper
    Dropbox
    Spotify
    Octoshape
    SIMBL Agent
    iSkysoft Helper Compact
    pCloud
    OpenDNS Updater
    smcFanControl
    TSPrint Client
    Rowmote Helper
Internet Plug-ins:
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    LogMeInSafari32: Version: 1.0.530 3rd-Party support link
    googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    QuickTime Plugin: Version: 7.7.3
    LogMeInSafari64: Version: 1.0.530 3rd-Party support link
    FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    NPTWCP: Version: (null) - SDK 10.5 3rd-Party support link
    CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
    Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
    LogMeIn: Version: 1.0.530 3rd-Party support link
    FolxNetscapePlugIn: Version: Unknown
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 3rd-Party support link
    o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 3rd-Party support link
    JavaAppletPlugin: Version: Java 7 Update 21 Outdated! Update
    z: Version: (null) - SDK 10.5 3rd-Party support link
Safari Extensions:
    Dashlane: Version: 2.3.2.52081
    iTube Studio: Version: 4.1.0.2
    Kaspersky URL Advisor: Version: 8.0.5
    Virtual Keyboard: Version: 14.0
    YouTube Downloader: Version: 4.8.0.0
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
    TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
    AudioScrobbler: Version: 3.0.4 3rd-Party support link
User Internet Plug-ins:
    Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 3rd-Party support link
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    FolxNetscapePlugIn: Version: Unknown
    OctoshapeWeb: Version: 1.0 - SDK 10.8 3rd-Party support link
3rd Party Preference Panes:
    Citrix Online Plug-in 3rd-Party support link
    Connect360 3rd-Party support link
    Flash Player 3rd-Party support link
    Flip4Mac WMV 3rd-Party support link
    Growl 3rd-Party support link
    Java 3rd-Party support link
    MacFUSE 3rd-Party support link
    Perian 3rd-Party support link
    Tuxera NTFS 3rd-Party support link
Old Applications:
    Microsoft Language Register:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
    /Users/[redacted]/Library/Application Support/Helper
        iSkysoft Helper Compact:    Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
        Aimersoft Helper Compact:    Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
    SLLauncher:    Version: 1.0 - SDK 10.5 3rd-Party support link
        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
    PwnageTool:    Version: 4.3.3 - SDK 10.4 3rd-Party support link
        /Users/[redacted]/Desktop/iOS4 Jailbreaking/PwnageTool.app
    /Applications/Microsoft Office 2011
        Microsoft PowerPoint:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Excel:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Outlook:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Word:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Document Connection:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
    DockPlistEdit:    Version: 7.0 - SDK 10.5 3rd-Party support link
        /Library/Parallels/Uninstaller/Parallels Hypervisor/DockPlistEdit.app
    /Applications/Microsoft Office 2011/Office
        Microsoft Graph:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Database Utility:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Office Reminders:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Upload Center:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        My Day:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        SyncServicesAgent:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Open XML for Excel:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Alerts Daemon:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Database Daemon:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Chart Converter:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
        Microsoft Clip Gallery:    Version: 14.3.6 - SDK 10.5 3rd-Party support link
    Meteorologist:    Version: 1.5.6 - SDK 10.4 3rd-Party support link
    Lithium Core Admin:    Version: 5.0.15 - SDK 10.5 3rd-Party support link
    Microsoft Communicator:    Version: 13.1.3 - SDK 10.5 3rd-Party support link
    Lithium Console:    Version: 5.0.15 - SDK 10.5 3rd-Party support link
    SpotiMy:    Version: 1.1 - SDK 10.0 3rd-Party support link
    Rowmote Helper:    Version: 3.4.1 - SDK 10.5 3rd-Party support link
    iPhone Explorer:    Version: 2.1.0.1 - SDK 10.0 3rd-Party support link
    Data Rescue 3:    Version: 3.2 - SDK 10.4 3rd-Party support link
    Rivet:    Version: 2.8.0 - SDK 10.5 3rd-Party support link
    Remote Desktop Connection:    Version: 2.1.2 - SDK 10.5 3rd-Party support link
    Solver:    Version: 1.0 - SDK 10.5 3rd-Party support link
        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
    dynamiclinkmanager:    Version: 6.0.0 - SDK 10.5 3rd-Party support link
        /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
    dynamiclinkmediaserver:    Version: 6.0.1 - SDK 10.5 3rd-Party support link
        /Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
    iSkysoft Helper Compact:    Version: 2.2.5.6 - SDK 10.5 3rd-Party support link
        /Applications/iSkysoft Helper Compact/iSkysoft Helper Compact.app
    Microsoft AutoUpdate:    Version: 2.3.6 - SDK 10.4 3rd-Party support link
        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    Audacity:    Version: 1.3.13.0 - SDK 10.4 3rd-Party support link
        /Applications/Audacity/Audacity.app
    /Library/Application Support/Microsoft/MERP2.0
        Microsoft Error Reporting:    Version: 2.2.9 - SDK 10.4 3rd-Party support link
        Microsoft Ship Asserts:    Version: 1.1.4 - SDK 10.4 3rd-Party support link
    SA Color Finesse 3 UI:    Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
        /Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
Time Machine:
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 930.71 GB Disk used: 363.47 GB
    Destinations:
        Untitled [Local] (Last used)
        Total size: 2
        Total number of backups: 59
        Oldest backup: 2013-12-15 08:32:21 +0000
        Last backup: 2014-03-23 19:01:48 +0000
        Size of backup disk: Adequate
            Backup size 2 > (Disk used 363.47 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
       158%    vmware-vmx
       139%    Adium
        38%    plugin-container
         7%    thunderbird
         6%    firefox
Top Processes by Memory:
    3.55 GB    vmware-vmx
    1.01 GB    firefox
    410 MB    thunderbird
    262 MB    kav
    229 MB    plugin-container
Virtual Memory Information:
    1.03 GB    Free RAM
    5.20 GB    Active RAM
    5.07 GB    Inactive RAM
    4.44 GB    Wired RAM
    5.09 GB    Page-ins
    1.01 GB    Page-outs

You have waaaaaay, waaaaaay too much software and "garbageware" installed on your Mac!
Plus, you are treating your Mac too, tooo much like a Windows PC!
Are you a former WindowsPC user?
You do not need all of this software crap and "garbageware" you have installed on your Mac.
How many applications do you run simultaneously in the background while working in another application?
With 16 GBs of RAM, you should not be experiencing any memory Page out issues. Yet, you have over a GB of memory Page outs!
You are, probably running tooo many applications at once. You need to cut back the amount of open applications that you have up and running concurrently OR install even MORE RAM!
Your year and model Mac can take up to 32 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Unless you are running Kaspersky antivirus software under your Windows setup, completely uninstall this from OS X per instructions on the developer's website.
OS X does not need antivirus software. Antivirus software can slow down the normal operation of OS X and have adverse and negative effects on performance and operation of OS X.
Compleley uninstall CleanMyMac per the instructions on the developer's website.
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Again, you have waaaaay toooo many user startup/login items!
You need to really, REALLY, look at these at determine what you need to have launch at startup or Login.
You really need to whittle this waaaay down!
All of these items launching at startup/login is causing a large part of your Mac slowdowns.
Add or remove automatic items
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
Select the name of the item you want to prevent from opening automatically, then click Delete below the list on the right.
Google software is ,currently, not 100% compatible/compliant with OS X Mavericks. Especially Google Chrome and Drive.
So, uninstall all Google software per the instructions on Google's website until Google posts an "official" fix/update for these.
If you do not like Apple's Safari Web browser, try using Mozilla Firefox, instead. Mozilla constantly updates FireFox and there is a new update available.
Also, Telestream Flip4Mac plugin is an issue on OS X Mavericks. If there is no Mavericks update for this plugin, then completely unistall this plugin per instructions on the Telestream website. Use the newest version of VLC player, instead.
Completely Uninstall MacFUSE. There hasn't been any updates for this in a couple of years and is outdated and incompatible with Mavericks. Uninstall per instructions on the developer's website, also.
You need to update all of your third party software if there are OS X Mavericks updates that can be applied.
You may need to,ACTUALLY, go to the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins, extensions and add ons, also.
Also, if you have any connected third party devices, like non-Apple keyboards, mice, drawing tablets, hubs, card readers, etc, you need to go to the device makers' websites' and update the drivers for these devices to OS X Mavericks compatible versions, if available, applicable and needed.
Good Luck to you!

Trying to figure out how to get custom quiz concept to work

OK so I've been trying to get this concept to work in CP4. I have simulation quiz questions that gives the user 2 attempts to answer the quiz. The one hitch is that if the user get the question wrong the first time it gives them an "incorrect try again" message and if they get it wrong the second time it gives them an "incorrect please review section...." message. Now I've been trying to get this to work many ways and haven't been able to get the quiz to score right due to the fact I can't get CP to let me use the multiple incorrect feedbacks in a single click box.
I've tried setting up the questions using 2 click boxes (each click box has a different incorrect feedback message) but I run into the issue of if I answer the question right the first time then the second click box goes unscored and throws off the percentage. I've been trying to figure out a way to manipulate the captivate system variables (cpinfoquizpasspoints, cpinfototalquestionsperproject, cpinfopointsscored) but I can't for the life of me figure out how to update the variables (ex. overide the cpinfototalquestionsperproject with my own number or add additional points to the cpinfopointsscored variable if the user gets the question right the first time. Basically I need to fig out a way to get this to work and ultimately be able to communicate to a Sumtotal LMS what the results are. I'm very open to suggestions
Thanks
B
btw. I'm really disappointed that CP4 allows different feedback messages on multiple attmeps for their built in questions but not for custom click box questions!!!!

I would try the multi choice like captiv8r said. if that doesn't work try a clickbox for each answer and:
Some quick notes for set up. Slide XX represents the slide that will contain the next question in the quiz. You may want to create all the slides (even if they are blank) as place holders for each question in the quiz. So if a question has 4 possible answers that's gonna be 4 slides for that question. If you have 5 questions and they all have 5 answers then you want to create 25 slides for the questions. (I think I did the math right on that )
Change the properties for the click box to on success: go to next slide (unless this is the correct answer then select jump to slide XX). Change the options
Under Options Only check Success Caption, Pause project until user clicks and pause for success/failure captions.
Click OK......You will be given a click box with a green box that says type success text here.
Right click on the green box and select Properties
If this box is the right answer type in Correct or something to that extent. If its the wrong answer type in "Answer is wrong because ..bla bla bla..... reasons". You can format the font to be red or green and choose the appropiate caption type to match your color scheme (or create your own custom caption)
Click OK.
After that all you have to do is duplicate the click box (right click on the click box and select duplicate) and edit the caption to be either "correct" or "answer is wrong because....."
Once you have all your captions in place you can copy the entire contents of the slide an paste it into the rest of the slides set up for that question (remember if the question has 4 answers then thats 4 slides for that question)
repeat steps 1 - 9 for the rest of the questions.
Some things you want to consider. If you only want to give the user say 2 attempts per question then you want to modify the setup to only 2 slides per question. That way if they get it wrong on teh second attempt they are advanced to the next question. If you are scoring this quiz you will have to set-up some variables for scoring.
The method above is what I used to answer my own question from the original post.... Lots of work but it got the job done! Good luck.
B

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for over an hour. Seems very complicated and cumbersome, Can you help?

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.

Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such.

Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

i have this problem too
my dad thinks its because itunes is getting overloaded

Trying to figure out this setup...

Similar Messages

Maybe you are looking for