Trying to fill setup table for 2LIS_04_P_ARBPL
Hi
I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
Am I missing a step?
Thanks
Pooja
I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
Then I got the message - datasource still contains data to be transferred.
Thanks!
Similar Messages
-
Filling setup tables for 2lis_03_um
hi
i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
its asking Archiving Run . i am trying to give or f4 its not allowing me?
please let me knowHi Suneel........
Check this thread by Roberto Negro......
Archive run.
Hope this helps.....
Regards,
Debjani..... -
Tcode to fill setup tables for application 0CS( Customer Service)
Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points. -
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
How to Fill Setup tables for MAP (IS- Retail)
Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
NareshHi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh -
How to fill setup table for Application 18 Customer services
Hi,
How can I fill setup table for application 18.
Regards,
STHi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya -
Trying to fill Setup table but could'nt able to do?
Hello all
Iam trying in Sandbox,to fillup the setup tables for Sales Application "11",but its saying like "<b>No extraction structure active or no BW connected</b>",for this I deleted the setup tables from "LBWG" and tried to delete the Init load from Infopackage,but no Init load is available there? and then Iam trying to fillup the setup table but the same error is repeating.
How to fillup setup tables now?
Many thanksError message when filling the setup tables Help
SAP Note Number Note Language DEEN Display Versions 12
Print SSCR Download
Text Header Data Release Correction Instructions Support Packages >>
Symptom
When you call the transactions for filling the setup tables to initialize the logistics data for the Business Information Warehouse, the system terminates with error message M2630:"No extraction structure active", although the update is active for at least one extract structure.
Additional key words
LBWE OLI4BW OLI9BW OLI7BW
Cause and prerequisites
The problem may be caused by the fact that there is no BW system connected to the OLTP system.
Solution
Change the text in error message M2630 to:
"No extract structure active or no BW system connected"
Source code corrections -
Strange error while filling setup tables for purchasing
hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you. -
How to stop document posting when filling setup tables for logistic app.
Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. GarduñHi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan -
Error while filling setup table for Quality Mangement D/Sources
HI Experts,
Iam trying to fill the QM setup tables.
Steps iam following are
1.T-code OLIQBW
2.Selecting Event QV, QE and gave selection parameters and name for Run.
3. Execute
4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:21:01
Function parameter "I_ADDITIONAL_DATA" is unknown.Hi Mansi,
Runtime Errors CALL_FUNCTION_PARM_UNKNOWN
Exceptn CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:56:20
ShrtText
Function parameter "I_ADDITIONAL_DATA" is unknown.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLQMER" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The reason for the exception is:
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Missing RAISING Clause in Interface
Program SAPLQMER
Include LQMER$01
Row 5
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS
Trigger Location of Exception
Program SAPLQMER
Include LQMERU01
Row 488
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance -
How to fill setup table for the Extractor: 2LIS_02_CGR
Hi,
Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
Could any one provide me the step-by-step to fill the setup table.
Regards,
Prem
Edited by: pannalde on Dec 2, 2010 6:03 AMHi Prem:
For more details please refer to the blog by Paulo Junior.
"The SET UP!"
/people/paulo.junior/blog/2010/11/25/the-set-up
Regards,
Francisco Milán. -
What is the transaction to fill Setup tables for 2LIS_08TRFKZ
Hello Friends,
I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct? Its not just working.
Thanks
Simmiwhy don't you go through the menu if you're not sure about the transaction code?
SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
then launch it and follow menu
System > Status
it will tell you the transaction code (= VIFBW)
Maybe you are looking for
-
What can't I reconnect to my network?
Prior 10.5.3 everything worked fine. I have made no changes to my systems whatsoever. When I upgraded to 10.5.3 my MBA will not automatically re-connect to my APE after sleep unless I did it manually or turned BT off. 10.5.4 did not fix it either. Ho
-
Burning discs that work in low-end DVD players
Hi everybody. Situation: I'm burning DVDs of a rough cut of a documentary for festivals and various interested parties. I'm burning with DVD SP. I was using Memorex 16X DVDs. The resulting DVDs work on computers and most DVD players. But they don't w
-
Security/virus problem?
I've been asked to explain why the following is not a security issue with JWS: 1. A user installs an application from a trustable source which uses some native libraries. 2. The web-site hosting the application is hacked and viruses are uploaded. 3.
-
Where can I find mountain lion download
I want to make a bootable USB of OS X Mountain Lion. However, when I went to the App Store I could not find it. Can anyone direct me to where I might be able to download it?
-
Any available tools for formating xml document?
Hi, I'm just looking for a java tool can help me sorting the xml document and text in alphabetical order. Anybody has any suggestion? Thanks a lot.