Trying to get internet linked video/audio pages to work on Mac

Hello there, I'm a new mac user and I'm having difficulty opening video/music from websites such as xfm and bbc.co.uk. A message appears that reads something like MIME not supported. x-pn/realaudio plug in required. Can anyone help please???
Best regards
Paul

I think the BBC site now uses Real Player for most of their audio content.
You can download the free player here: http://real.com

Similar Messages

Can't get to links on web pages

I can't get to links on web pages , shrink or enlarge the web page or show the other web pages that are open?The back arrow does work

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

IChat video/audio fails to work

iChat video/audio fails to work 90% of the time. The error message says the other party failed to respond, or some other, similar, bogus "communication error" message.
Invitation to video or audio chat fails 100% of the time with certain buddies of mine, and anywhere from 50% to 90% of the time with others, regardless of whether they invite me or I invite them. Changing ISPs, Macs, locations, or static/dynamic IP settings has made no difference.
This problem surfaced with Tiger in the summer of 2007, and progressively became worse, especially since Leopard, to the point where iChat video/audio fails 100% of the time, unless the other user happens to be in the same [home] network.
All of a sudden the problem went away since the upgrade to 10.5.6, and I was able to again use iChat video to communicate with friends I have not been able to "see" in a year and a half! However, the problem started again today, with the same bogus "communication error" message every time a video connection attempt is made.
Screen Sharing also fails to work, 100% of the time, regardless of how it is invoked, through iChat or not, unless, again, it is attempted between 2 macs in the same home network.
In the meantime, Skype video works fine all the time.

Hi,
Thomson-Alcatel by default do what is called Binding of SIP to port 5060
This means ANY SIP data is forced to that port. iChat 4 no longer uses this port for SIP. It caused problems in iChat 2 and 3 which could be resolved when the firmware was Version 4 or earlier.
How do I know ?
Personal Experience from a Speedtouch 510v4 (running version 4.2.5 firmware)
Hence the web page I linked you to.
Built up from comments on the iChat 3 forum and the iChat 2 forum since 2004
Search Results for iChat 3 (it will only go back to about Nov 14th 2005 when the software Apple Uses to run the forums changed - some active threads did cross over this date so occasional ones are older)
Smaller results from iChat 2
The work by iBoise in this forum and the ADSLGuide's Apple Forum
Known issues for the BT HOME HUB in Britain as it is a Thomson-Alcatel inside.
Because the fix on Page 4a in the orignal link I gave, worked until Version 5 firmware came out.
As I clearly said the results can be intermittent.
With non Speedtouches it tends to be a 10:10:30 split out of 50 Buddies
10 you can get all the time.
10 now and then Buddies and
30 Never successful.
The Original Version 4 Telnet command would make this 100% successful to non Speedtouch devices
In Version 5 it becomes about 15:10:25 which only marginally better.
Later versions of the firmware do not even seem to reach these figures.
Speedtouch to Speedtouch connections are better but still not 100%
I would guess you live some where where Speedtouch's are popular and have many Speedtouch to Speedtouch connections that fair slightly better than average.
Last time I had contact with iBoise on this the Firmware was at version 7 and he was in the process of evaluating it for any changes.
There has been no announcement. In this case I don't think No News is Good News.
I hope this helps.
10:42 PM Wednesday; January 21, 2009

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Video audio doesn't work

video audio doesn't work
video runs but no sound
please help

ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608
Again:
It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

I can't play MPEG4.avi video - all I get is "The video player has stopped working. Please relaunch"

I can't play MPEG4.avi, or any other, video - all I get is "The video player has stopped working. Please relaunch". Please tell me what to do.

I took the video in 2009. I can't remember the camera model I took it with and the other information you request does not show up in the "i" panel in iPhoto.
My version of iPhoto 11 is 9.2.3.

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.

I asked this question before but I can't find it now. Anyway, I'm trying to import a DVD video that was made on a MAC and use it on a new iMovie project.
How do I do the importing.

If the video is already on a DVD:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

HT1338 I am trying to get my system current. I am now running Mac OS X, version 10.6.8 (I believe this is "Snow Leopard". What should I upgrade to?

I am trying to get my system current. I am now running Mac OS X, version 10.6.8 (I believe this is "Snow Leopard"). What should I upgrade to?

The current system is OS X 10.8 which is downloadable from the App store, which you can upgrade to directly if your system meets the system requirements. Note that starting with OS X 10.7, PowerPC-based programs will no longer run. So, for example, people with Office 2004 got surprised when they upgraded and found that the older Office programs would no longer run. Newer Office programs are OK.

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email it still wont verify???

I have been trying to get my daughter's iPod Facetime to work. But when we log on it won't let us. When we put in our ID and password it attempts to verify but fails and when we have create a new account and had confirmation email back it still wont verify???

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

I am possessing apple iphone4. In my phone while watching video, audio is not working. Volume level is fuul

I Am holding iphone 4.7.1.2. though my volume is full, while on video audio is not working.

Hi klgksharma,
Welcome to the Apple Support Communities!
I understand that you are not hearing sound from the speaker of your iPhone while watching video. In this situation, I would recommend working through the steps in the attached article to troubleshoot.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Best regards,
Joe

Trying to get my air video app and my airport extreme router to work.

Hi there. I am getting really frustrated and desperate. I just purchased the app "air video" on my iPad. Installed the software on my mac. Works awesome when I'm on MY WIRELESS NETWORK. I didn't think it would be an issue once I left the house and tried to go on someone else's network to connect, but it just won't work. It keeps giving me the error "host not reachable". I tried opening up the air video troubleshooting info and tried everything but nothing seems to work. I tried under the "remote" tab in the air video server preferences. I clicked both "enable access from Internet" and the "auto map port" options. In the box below I just see the word status and the spinning wheel along with "looking for UPnP or NAT-PMP compatible devices" but the wheel has been spinning for about 15 mins. It doesnt appear to be finding anything.
I've also clicked off the "auto map port" to see if that would do anything. I got the pin and tried that. Still nothing. I tried to look for some information on port forwarding for my airport extreme but everything I'm googleing seems to be years out of date.
I am currently on Mac snow leopard 10.6.3 I believe. Everything is latest version. Using comcast modem with apple airport extreme router. Latest version of Air video app and software. On iOS 4.3.1.
Anyone that can try to help me out, I would be eternally grateful.
Thank you so much
Keith

* need to edit to" trying to get my iPhone not iPhoto**"

When trying to open a link in the page I am on and open it in a new Tab the browser stops responding.

I open the browser and the Hime Page opens as expected. When I open a link to an item or article on the page in a new Tab Firefox stops responding and thye top line on the screen shows that to be the case. The only way to resolve the issue is to exit or close Firefox and start again. This has just started yesterday (Oct 12) as before that the process worked fine.
When I open a new Tab and then type in a new web site it will open and allow access with no problem, provided I have not open a link as outlined in the first paragraph. I can open several tabs in this manner and Firefox works as expected. But if I try to link from any page and open in a new Tab i get the "not responding" situation again.
After closing Firefox so I can restart it, the browser will open but the first screen will be a blank tab rather than my home page. I can open web sites and Firefox proceeds as expected as long as I do not try to open a link from within the page in a new Tab. I get the same "Not responding" situation.
If I immediately close Firefox after it opens without my homepage and then restart it then my home page will open as expected.
I have not made any changes to programs or setups in Firefox or on my computer in the immediate time before the problem started.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Apple TV video / audio Mirroring stopped working with Yosemite 10.10.3 update

Have just updated two Macbook Airs to Yosemite 10.10.3. Also updated Apple TV to latest version (7.2).
Now video / audio play back is extremely stuttery = only get about 1 sec of play back every 5 secs. We also have a Chromecast (similar to Mirroring) and that plays video & audio from the Mac perfectly. Movies play ok from iTunes, as do Youtube etc directly from Apple TV.
Never had any issues with previous versions of Yosemite.
I can't find any info on this on Apple sites or searching the web. Just articles stating how many bugs 10.10.3 has fixed!!
I can't work out how to contact Apple with this issue, when I use the support page for my location (New Zealand) it times out trying to enter the details.
Cheers

I have found a similar thread that was started last year with the same problems on 10.10.2. The solution suggested there has worked for me - turn off Bluetooth before connecting to Apple Tv via Airplay.
Hopefully Apple will fix this Bug, but I won't hold my breath as it seems some users have had this issue through a couple of releases off Yosemite.

Every time i try to download something, i get redirected to the home page and nothing happens (mac osx mavericks, 10.9.4) DETALS INSIDE!

so basically I'm on a Macbook Pro and i have osx mavericks 10.9.4
i tried to download HotSpot Shield. i go to their home page and click download and i get redirected to the home page and there is no download, NOTHING HAPPENS.
same thing with trying to download magnet links and .torrent files on Piratebay.se. i click "Get this Torrent" and i get REDIRECTED TO THE HOME PAGE. the .torrent file doesn't appear in Downloads. NOTHING HAPPENS!!
please help me. PLEASE!!

Other browsers that you can look at:
* http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
* http://www.seamonkey-project.org/releases/seamonkey1.1.19

Cannot get 'Go to Database Home Page' to work on 10gXE after installation

Hello,
I recently installed Oracle(univesal) 10g XE onto my PC. I tried to go to the Database Home Page and am not able to do so. When I click the 'Go to Database Home Page' button, a browser appears with the message 'page cannot be displayed'.
I am using Windows 2000 and have installed the loopback adaptor.
Thanks,
Shane

You might want to search this forum for keywords "10gXE Database Home Page" - this has been discussed many, many times.
In addition, Virag has such an excellent troubleshooting site, it is simply a waste of time to walk through the steps here - go to http://viragsharma.blogspot.com/search/label/oracle%20XE first!

Trying to get internet linked video/audio pages to work on Mac

Similar Messages

Maybe you are looking for