Trying to get laptop to use printer hooked up to my PC.
i have a Hp pavilion g7-1227nr laptop and a HP photosmart C5580 printer. i have downloaded every HP solution for the printer but nothing will let me print from my laptop (wireless) to the printer that is hooked up to my PC. Both of my children have HP laptops and they cannot get their laptops to print to the printer either. Any suggestions?
Hi sonewald1,
hope you are doing well and sorry to learn that you are having this issue.
Have you shared the printer in your network? you have to do this in order to be able to use the printer from other computers unless you have a router that is capable of been used as a printer server which you can check on your router's owner manual.
Follow this;
Click on Start in the bottom left corner of your screen. A popup list will appear.
Select Control Panel from the popup list. Type the word network in the search box.
Click on Network and Sharing Center.
Click on Change advanced shared settings, in the left pane.
Click on the down arrow, which will expand the network profile.
Select File and printer sharing and choose Turn on file and printer sharing.
Click on Save changes.
You're now ready to share your printer.
Click on Start in the bottom left corner of your screen. A popup list will appear.
Click on Devices and Printers, from the popup list.
Right click the printer you want to share. A dropdown list will appear.
Select Printer properties from the dropdown list.
Click on the Sharing tab
Select the Share this printer check box.
In order for other people to connect to the printer, they just have to add the network printer that you just opened for sharing to their computers. Here's how to do this.
Click on Start in the bottom left corner of your screen. A popup list will appear.
Click on Devices and Printers from the popup list.
Select Add a printer.
Click on Add a network, wireless or Bluetooth printer.
Click the shared printer.
Click Next. Continue according to the instructions on the screen [source: Microsoft].
Hope it helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
Similar Messages
-
I am trying to get my D1560 to print from my laptop.
I was trying to get my D1560 to print from my laptop. On advice from the HP website, I uninstalled the printer, and downloaded the latest driver software. But when I extract the file (either the downloaded file or from the CD), nothing happens. The file extraction reaches 100%, then nothing. No error messages, no directions on what to do next, not even a kiss goodbye.
How can I get the printer installed, and then print from a networked computer that is not directly attached to the print device?
I've taken two steps back. At least before, Windows (7, 64-bit, by the way) would recognize the printer, even though I couldn't print to the D1560.
The print device is attached to my HP Slimline desktop. Does the Slimline have to be awake in order to print from my laptop?
Also, I downloaded the HPPDU software, (before I uninstalled the printer) but since it can't find the printer, it can't solve the problem. That IS the problem - the computer can't find the printer.iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Cheers, Tom -
I am trying to get my computer to print on HPC310. It was working until 2 days ago and then stopped working. I uninstalled the HP software thinking I could just reinstall and it would help but I cannot now install that software from the disk. How do I go about getting the old software I had on the computer and how do I get my computer to print. It gives my messages that it cannot find the printer or printer unknown.
Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane? -
I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.
Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!!
-
I am trying to get authorisation to use Adobe digital edition, but my book's vendor is not on the list, and hence the password not accepted.
Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
Getting socket error while trying to get oracle connection using JDBC
hi,
I am getting following socket read error while trying to get database connection using JDBC. This happening with jdk1.5.0_12 version with Oracle 9i
following is the stacktrace...
Thread t@92: (state = IN_NATIVE)
- java.net.SocketInputStream.socketRead0(java.io.FileDescriptor, byte[], int, int, int) @bci=0 (Compiled frame; information may be imprecise)
- java.net.SocketInputStream.read(byte[], int, int) @bci=84, line=129 (Compiled frame)
- oracle.net.ns.Packet.receive() @bci=31 (Compiled frame)
- oracle.net.ns.DataPacket.receive() @bci=1 (Interpreted frame)
- oracle.net.ns.NetInputStream.getNextPacket() @bci=48 (Compiled frame)
- oracle.jdbc.driver.T4CMAREngine.unmarshalSB1() @bci=1, line=1070 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.doOall8(boolean, boolean, boolean, boolean) @bci=617, line=207 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.executeForDescribe() @bci=39, line=790 (Compiled frame)
- oracle.jdbc.driver.OracleStatement.executeMaybeDescribe() @bci=106, line=1039 (Interpreted frame)
- oracle.jdbc.driver.T4CStatement.executeMaybeDescribe() @bci=11, line=830 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout() @bci=128, line=1132 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.executeQuery(java.lang.String) @bci=76, line=1272 (Interpreted frame)
any help would appreciated. thanks in advanceI do not have exact exception message.
additionally, i have got following the tomcat log file:
INFO - Resource pool cleanup thread just woke up.
Nov 1, 2008 3:41:52 AM org.apache.tomcat.util.threads.ThreadPool logFull
SEVERE: All threads (100) are currently busy, waiting. Increase maxThreads (100) or check the servlet status
INFO - Resource pool cleanup thread just woke up.
thanks in advance -
Getting exception when trying to get taskdetails url using BPM worklist api
Getting exception when trying to get taskdetails url using BPM worklist api method :
String url = WorklistUtil.getTaskDisplayURL(
wfSvcClient,
ctx,
task,
null,
"worklist",
parameters);
Jul 21, 2011 11:24:40 AM oracle.bpel.services.common.ServicesLogger __log
WARNING: <oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean()> Exception while loading install config file in standalone Error : javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
oracle.fabric.common.FabricException: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:184)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean(TaskFlowPropsUtil.java:319)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfoForWeblogicServer(TaskFlowPropsUtil.java:491)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfo(TaskFlowPropsUtil.java:363)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getDefaultURLPrefix(WorklistUtil.java:264)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:353)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:293)
at com.test.WorflowServiceClient.main(WorflowServiceClient.java:198)
Caused by: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:662)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at oracle.as.jmx.framework.config.session.ConfigurationMBeanServerImpl.getAttribute(ConfigurationMBeanServerImpl.java:210)
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:78)
... 7 more
Caught workflow exception: null
Process exited with exit code 0.
Can anyone please help meActually i'm using Jdeveloper 11.1.1.4 and our requirement is to show list of BPM worklist tasks for the logged in user on the first page and onclick of each task task details page should be opened. I can use Webcenter PS3 worklist taskflow. But i'm not able to customize that taskflow. So, i'm going for Worklist client api.
I'm able to retrive the taskId,task title and few other details like task payload. But i don't know why the below method is giving exception.
String url =
WorklistUtil.getTaskDisplayURL(wfSvcClient,
ctx, task, null,
"worklist", parameters);
And i observed that you have also used the same code for getting Taskdetails url. And one more thing is i'm trying to access BPM worklist which is installed on remote machine.
Can you tell me what could be the reason for the exception? -
Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
Airport utility 5.5.3
Airport Extreme 802.11n
Airport Express 802.11gThe problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address). -
Trying to get newest record using a select statement
Hello everyone.. I'm a bit new at this but I've been teaching myself by trial and error so bear with me.
Using a 'DEDUCTION' table for this example, I am trying to get it to resolve the record that is most current. Since each employee record could have changes, the table could have multiple entries/deductions of which only one is the most current.
Ok, so medical deductions are like DEDUCTIONS 700-715 while dental deductions are 730-737. Initially, I was trying to figure out how to pull the deductions based on an employee and have it compare which is newer and report the newest one for each medical and then the dental deduction. If there is not a type of deduction for someone, it should report zero like a NVL I think. See example:
EMP_ID DEDUCTIONS EFF_DATE AMT
1 710 2000/12/01 85.39
1 735 2000/12/01 8.31
9 701 2001/08/29 12
9 707 2000/12/01 12
9 730 2000/12/01 .23
10 700 2001/02/25 .46
10 730 2001/02/25 .23
The record that stands out in this example is employee #9 with two medical deduction, one that supersedes the other - 701 and 707. Because 701 is newer it should ignore the 707 deduction.
Any ideas? Thank you!
kenHere are a couple of methods. The second one should run faster, but requires Oracle 8i.
SQL> SELECT emp_id, deductions, eff_date, amt,
2 'MEDICAL' AS type
3 FROM deduction
4 WHERE (emp_id, eff_date) IN
5 (SELECT emp_id, MAX (eff_date)
6 FROM deduction
7 WHERE deductions BETWEEN 700 AND 715
8 GROUP BY emp_id)
9 AND deductions BETWEEN 700 AND 715
10 UNION
11 SELECT emp_id, deductions, eff_date, amt,
12 'DENTAL' AS type
13 FROM deduction
14 WHERE (emp_id, eff_date) IN
15 (SELECT emp_id, MAX (eff_date)
16 FROM deduction
17 WHERE deductions BETWEEN 730 AND 737
18 GROUP BY emp_id)
19 AND deductions BETWEEN 730 AND 737
20 ORDER BY emp_id, deductions
21 /
EMP_ID DEDUCTIONS EFF_DATE AMT TYPE
1 710 2000/12/01 85.39 MEDICAL
1 735 2000/12/01 8.31 DENTAL
9 701 2001/08/29 12 MEDICAL
9 730 2000/12/01 .23 DENTAL
10 700 2001/02/25 .46 MEDICAL
10 730 2001/02/25 .23 DENTAL
6 rows selected.
SQL> SELECT emp_id, deductions, eff_date, amt,
2 'MEDICAL' AS type
3 FROM (SELECT emp_id, deductions, eff_date, amt,
4 RANK () OVER
5 (PARTITION BY emp_id
6 ORDER BY eff_date DESC) AS rk
7 FROM deduction
8 WHERE deductions BETWEEN 700 AND 715)
9 WHERE rk = 1
10 UNION
11 SELECT emp_id, deductions, eff_date, amt,
12 'DENTAL' AS type
13 FROM (SELECT emp_id, deductions, eff_date, amt,
14 RANK () OVER
15 (PARTITION BY emp_id
16 ORDER BY eff_date DESC) AS rk
17 FROM deduction
18 WHERE deductions BETWEEN 730 AND 737)
19 WHERE rk = 1
20 ORDER BY emp_id, deductions
21 /
EMP_ID DEDUCTIONS EFF_DATE AMT TYPE
1 710 2000/12/01 85.39 MEDICAL
1 735 2000/12/01 8.31 DENTAL
9 701 2001/08/29 12 MEDICAL
9 730 2000/12/01 .23 DENTAL
10 700 2001/02/25 .46 MEDICAL
10 730 2001/02/25 .23 DENTAL
6 rows selected. -
Useless - Extended Warrenty sold while trying to get laptop repair
My daughters G550 laptop had about 1 month(Mid-Sep-2010) of 'Factory Warranty' left. I contacted Lenovo for information on how/where to ship the laptop to for repair. The person I talked to convinced me to purchase an additional two-year warranty for $101. It made sense to me then.
The laptop was sent for repair and a few days later I got a call that the problem was that a liquid was spilled on the keyboard that fried the motherboard and this was not covered by the factory warranty and it would cost me about $360 to have it repaired. This I can't argue about since I did not have a damage type of warranty. But for the repair cost, I'd be better off buying a new laptop. The laptop was returned to me on 31-Aug-2010.
I tried to call Lenovo to cancel the additional two year warranty. The last phone number I think I used was 866-968-4465. The person I talked to said I couldn’t cancel the 'additional two year warranty'. This doesn't make sense to me. The new warranty hasn't started and I can't use it anyways!
Anybody have any ideas or am I just wrong?
Ron Stravinski
Moderator note; e-mail address removed to stop the spambots getting itPerhaps you can submit it for repair under the extended warrenty. Since they insist you keep that warrenty, then they should be willing to honor it.
Alternatively you might consider disputing the charge if you paid by credit card.
Personally I've found that the extended warrenties on an old laptop often cost about what the laptop would sell for on ebay, and if so, then imagine how much less it will sell for in 2years when it's more likely to need the warrenty service.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram) -
I need PC laptop to use printer plugged in to Mac
The PC is using the same wireless router as the Mac. Do I create a network on the PC (which runs Vista and has Bonjour) or on the Mac – and how?
Well, something is wrong here. You say you have Bonjour for Windows installed, but you can't find the printer setup wizard. Either it's there, in which case you should use it, or it's not there, in which case you have a faulty installation and should reinstall.
As for sharing via SMB, I don't know any more than what's in that technical bulletin. If it doesn't work, you'll have to get advice from someone who knows more than I do about Windows, which is nothing. -
Trying to get Airport Extreme to print on a bizhub C220.
We have three computers on a WiFi system. We had a cisco router and it quit working, so we upgraded to the Airport Extreme. Now the printer/copier that is wired into the airport won't print. The printer is a bizhub c220. What do I need to do to get it to print?
The old Cisco router probably had an IP address that looks like this 192.168.x.x
The printer probably has a fixed IP address in that range.. please check.. if the printer has LCD display that shows setup info or a setup page to print out check the IP address so you know it.
The Apple router has a default IP of 10.0.1.1 if you use it as a router.
Therefore all your clients are now in the 10.0.1.x IP range but the printer is still on 192.168.x.x
So to fix it either move the Airport router to 192.168.x.x range.. or move the printer to 10.0.1.x range..
This is only a guess.. of course but happens often enough to be a first guess..
If this is not the issue.. and the printer is able to be pinged from any client but is not printing.. delete the printer in each client and redo the setup.. any major network change can cause basic network havoc.. on all the unsuspecting devices.
No luck.. more more info.
What IP is the AE running and the clients?? What IP is the Printer?
How is the printer actually connected?
Can you ping it from the clients? -
I just got a new printer...Epson R3000...but have had this problem before. It's probably a simple fix, but I can't figure it out. I'm asking for printing on 8.5 x 11 and the image comes out 6.5 x 9.5 every time. Help please! And thanks!
The Epson site stated that the R3000 printer can print borderless however the quality will suffer in the expanded print area. Borderless is not supported on some heavy paper. To me the means your better off limiting you images size to the standard print area. There will be magins about 1/8" on the four sides so the print area on 8.5"x11" paper is 8.26" x 10.76"....
Take note of the print size set by the epson driver it may change depending on the paper type set. Note my first epson 4800 setup where I set 8.5" x 11" sheet paper from tray into the printer setting the driver set a smaller size for the paper which was reflected into the Photoshop Print preview. It shows paper is 8.499" x 10.999 with a small unprintable area across the top....
Paper
Use paper under normal conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single-sheets
Size
A4 (8.3 × 11.7 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
4 × 6 inches
5 × 7 inches
8 × 10 inches
11 × 14 inches
12 × 12 inches
Half Letter (5.5 × 8.5 inches)
B (11 × 17 inches)
A3 (11.7 × 16.5 inches)
Super B (13 × 19 inches)
Paper types
Plain paper
Special papers distributed by Epson
Thickness
0.003 to 0.004 inch (0.08 to 0.11 mm) in the sheet feeder
0.012 to 0.051 inch (0.3 to 1.3 mm) in the manual feed tray
Weight
17 lb (64 g/m2) to 24 lb (90 g/m2)
Printable Area
Note:
When printing borderless, quality may decline in the expanded printable area. Borderless printing is not supported with poster board.
Sheets
Top: 0.12 inch (3 mm) minimum
Left: 0.12 inch (3 mm) minimum
Right: 0.12 inch (3 mm) minimum
Bottom: 0.12 inch (3 mm) minimum
Roll Paper
Standard margins
Borderless printing margins
CD/DVDs
Caution:
Avoid printing in the clear plastic areas of your discs to prevent staining the disc with ink. -
What is incoming server connection. Trying to get email on Samsung printer app
I Bought a Samsung printer and trying to print emails. it is unable to connect to email. What is incoming server connection. It will print web pages
Note that a browser-based mail request does not necessarily go through the same network path as a request by the Mail App to a POP or IMAP server.
-
Trying to get my Lexmark 7300 printer to work on my iMac - how?
I have downloaded my Lexmark 7300 disk to my iMac and it recognizes the Lexmark printer, copier, fax. When I try to print an document or photo, or e-mail received from my iMac ISP connection (Cox.net), there is no response from the printer. Do I have to contact Lexmark to ask what setting to program in on the printer or is it an iMac omission because I did not download the Lexmark program correctly from the disk? How do I check this out on the iMac? I just purchased the iMac (24") and have the Apple Support which I will need to contact to capture my old G3 Adobe 7.0 programs that were transferred in a folder to my iMac but won't open.
Welcome to Apple Discussions ...
Check out this thread: http://discussions.apple.com/thread.jspa?threadID=1313583
Have you make certain that this printer is compatible with Leopard 10.5.x?
As for the G3 Adobe 7, I doubt that Leopard supports that version.
Can you drop the link here for the Lexmark 7300 disk you downloaded? Is it supported by Leopard?
Carolyn
Maybe you are looking for
-
Finder unresponsive when external hdd is plugged in
Hi everyone, im new to the forum, but I was looking for a solution to my problem and came here, and it seems like everyone is pretty helpful. so anyway, my problem is that every time I plug in my external harddrive (seagate free agent goflex 2tb usin
-
Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.
-
AVI - FLV with Flash Video Encoder
Heya, Whenever i try to encode Blizzards gameplay trailer of Starcraft 2 to FLV, the program tells me that the movies doesnt have a readable video track which seems to be a bit weird as it plays fine in winamp/vlc player. To be honest the SC2 movie i
-
I had my Mc Book Air repaired (they install again the OSX Lion) and now both USB ports don't woek any more! What can I do?:-(
-
Windows Embedded Standard (WSE) 2009
I guess Windows XPe (XP Embedded) no longer exist. Has anyone tried to run a LabVIEW application on Windows Embedded Standard? Any reason to think that LabVIEW won't work? I would like to hear from a developer who has tried WSE out with LabVIEW. T