Trying to get my epson scanner to work

I downloaded the latest update from Epson for a Perfection 4490 Photo scanner. The computer can't seem to find it. Power's on, USB connected, port is working OK. Any ideas? thanks.

You downloaded from here:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 58611&prodoid=53540925&infoType=Downloads&platform=Macintosh
Have you tried this:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&cate gory=Products&infoType=Contact&oid=58611&prodoid=53540925

Similar Messages

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
TLDR;
This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved.

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Trying to get a WRT54GX2 wireless router working with a W...

Trying to get a WRT54GX2 wireless router working with a WPC54G wireless card. The laptop and desktop both will access the Internet and work when hardwired through the router's Ethernet ports. When trying to access wireless, the Laptop shows to be connected to the router and also to Internet, but Internet Explorer can not access any websites. Suggestions? Thanks.

what ip address does the laptop get ?? ensure that the laptop is not set for a static ip add....and it gets an ip add from the router ..

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

I am trying to get this java program to work

I need your help, I am trying to get this java program to work. The program is long and massive, but I got stuck in the last point where the program checks if there are a double quotes or a comma in a string.
The string is an URL retrieved from XML files (this is already done).
There are 4 conditions:
Case 1
=====
The URL string is of invalid format and contains no commas (,) and no double quotes (").
Make no changes to the URL string.
Case 2
=====
The URL string is of invalid format and contains 1 or more double quotes (") but no commas.
Make no changes to the URL string.
Case 3
=====
The URL string is of invalid format and contains 1 or more commas (,) but no double quotes.
Modify the URL string so that it starts and ends with a double quote (").
Case 4
=====
The URL string is of invalid format and contains 1 or more double quotes (") and one or more commas (,).
Modify the URL string so that every double quote (") becomes a double double quote (""), and so that it starts and ends with a double quote (").
======
then write the modified URL string to the CSV file.
======
Examples:
1. hello ---> hello
2. hello "big" world ---> hello "big" world
3. hello, world ---> "hello, world"
4. hello "big,big" world ---> "hello ""big,big"" world"

You can do the searching with String.indexOf() and then you can make replacements (like " with "") with String.replaceAll().
As for adding leading and trailing ", that could be done with simple concatenation.

Can't get Epson scanner to work

I have an Epson Perfection 3170 scanner that I am trying to get to work under Arch. I installed the sane and xsane packages and xsane reports "no devices available". I tried downloading the driver for the Perfection 3170 from the Epson web site. They have both iscan-2.10.0-1.c2.i386.rpm and iscan_2.10.0-1.tar.gz available. I first tried compiling the code from the tar.gz package. The ./configure worked OK but the make quickly failed, complaining about some errors in a C function call. I next tried the .rpm file. I unpacked it using rpmextract.sh into a temporary directory and then copied the files to the appropriate system directories. This installed some new files such as /etc/sane.d/epkowa.conf, /usr/lib/sane/libsane-epkowa.so.1, etc. I added epkowa to /etc/sane.d/dll.conf and commented out epson and epson2. Still no luck.
lsusb returns:
Bus 001 Device 002: ID 04b8:0116 Seiko Epson Corp. GT-9400UF [Perfection 3170]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sane-find-scanner returns:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04b8 [EPSON], product=0x0116 [EPSON Scanner]) at libusb:001:002
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
But, scanimage -L returns:
[cbailey@mainpc temp]$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I reviewed various suggestions in https://wiki.archlinux.org/index.php/Sane
I tried "# gpasswd -a myusername scanner"
I looked in /lib/udev/rules.d/49-sane.rules. It already contained the lines:
# EPSON GT-9400UF | EPSON Perfection 3170 PHOTO
ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="0116", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
I tried adding this line to /etc/sane.d/epkowa.conf
usb 0x04b8 0x0116
I tried removing all lines from /etc/sane.d/dll.conf except epkowa. Also tried just epson and epson2.
So far, nothing works. scanimage -L always returns "No scanners were identified."
Any suggestions?

Here is some more info. After reading lots of man pages related to SANE, I discovered that there are a few environment variables I can set to turn on to get some debugging info. Here is what I got after setting those variables and running "scanimage -L" again:
$ export SANE_DEBUG_DLL=128
$ export SANE_DEBUG_SANEI_USB=128
$ export SANE_DEBUG_EPKOWA=INFO
$ scanimage -L
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.24
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `epkowa'
[dll] sane_get_devices
[dll] load: searching backend `epkowa' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1'
[dll] init: initializing backend `epkowa'
message.c:98: [epkowa]{I} setting message level to 'INFO' (8)
backend.c:152: [epkowa]{I} Image Scan! for Linux 2.29.3
backend.c:153: [epkowa]{I} version 1.0.213
backend.c:163: [epkowa][m] authorisation not supported
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/net: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/pio: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/scsi: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/usb: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/interpreter: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/fs-blacklist: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/share/iscan-data/option: No such file or directory
cfg-obj.c:618: [epkowa]{I} /usr/var/lib/iscan/interpreter: No such file or directory
cfg-obj.c:618: [epkowa]{I} ./epkowa.conf: No such file or directory
cfg-obj.c:626: [epkowa]{I} using '/etc/sane.d/epkowa.conf'
cfg-obj.c:371: [epkowa]{I} line: 'usb'
[sanei_debug] Setting debug level of sanei_usb to 128.
[sanei_usb] sanei_usb_init: marking existing devices
[sanei_usb] sanei_usb_init: Looking for kernel scanner devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
[sanei_usb] sanei_usb_init: initializing libusb-1.0
[sanei_usb] sanei_usb_init: Looking for libusb-1.0 devices
[sanei_usb] sanei_usb_init: found libusb-1.0 device (0x04b8/0x0116) interface 0 at libusb:003:003
[sanei_usb] store_device: add dn 0 with libusb:003:003
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
[sanei_usb] sanei_usb_init: skipping device 0x1d6b/0x0002 at 003:001: cannot open: Access denied (insufficient permissions)
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
[sanei_usb] sanei_usb_init: skipping device 0x1d6b/0x0001 at 005:001: cannot open: Access denied (insufficient permissions)
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
[sanei_usb] sanei_usb_init: skipping device 0x1d6b/0x0001 at 004:001: cannot open: Access denied (insufficient permissions)
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
[sanei_usb] sanei_usb_init: skipping device 0x1d6b/0x0001 at 002:001: cannot open: Access denied (insufficient permissions)
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
[sanei_usb] sanei_usb_init: skipping device 0x1d6b/0x0001 at 001:001: cannot open: Access denied (insufficient permissions)
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_init: device 00 is libusb:003:003
[dll] init: backend `epkowa' is version 1.0.213
[dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `epkowa's exit function
[dll] sane_exit: finished
From those messages I see that sanei_usb found the scanner:
[sanei_usb] sanei_usb_init: found libusb-1.0 device (0x04b8/0x0116) interface 0 at libusb:003:003
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_init: device 00 is libusb:003:003
but, then sane_dll reports
[dll] init: backend `epkowa' is version 1.0.213
[dll] sane_get_devices: found 0 devices
The fact that sanei_usb found the scanner doesn't seem to get passed from sanei_usb -> epkowa -> sane_dll
I wonder if this message from epkowa has something to do with it?
backend.c:163: [epkowa][m] authorisation not supported
Any suggestions?

Epson scanner not work with Mountain Lion?

I have an Epson Expressio 1600Pro scanner with transparency adaptor. It has worked perfectly with previous Macs using OSX 10.4. I have recently bought a MacBook pro and upgraded it to OSX 10.8. I went to Epson's website to get a new driver etc. That tells you it can only be downloaded via Mac Software Update. That was duly done and installed. System prefs lists it under printer and scanners. OK
I have also installed Photoshop Elements 11 and expected to be able to scan direct to there but nothing seems possible. Going to Help says use Image capture or Preview. Yes! there is a small very rudimentary scanning window appears in both apps. Now the problem! Nothing happens. I have tried ALL the various meagre settings on offer, changing size, resolution, custom etc and all that happens is a small rectangle of a scan occurs but no resulting file.
I have been on to Epson who say ONLY image capture will work with 10.8 but as it is a 3rd party software they can offer no assistance. Well image capture does NOT work. I have spent all afternoon trying various things like restarting, unplugging, reconnecting etc etc nothing.
10.8 does seem very buggy. I have even had to stop using Mail and Safari simply because it doesn't work whereas Thunderbird and Firefox work very well.
But I digress, does anyone have any thoughts please?

The following comments are based on installing an Epson RX700 All-in-one printer/copier/scanner so they may not be applicable to you but, for what it's worth here they are. The RX700 scanner worked perfectly with Snow Leopard and then Lion but, when I changed to Mountain Lion, and used the app store to download and install the drivers, I lost the Epson scanner utility (ie. the user interface that gives you all the scanner options).
However, if I used System Preferences and then the Print and Scan option, it brought up a small window where I could select either Print or Scan. Selecting Scan or Open Scanner from this window then opens up a window with all the scanner options in it, including an overview scan. This window has the option to either Hide Details (all the detailed scanner options - resolution, size, output file name etc) or Show them. As far as I can see, this window is actually the Image Capture app, although it doesn't say so.
It might be a long shot but try changing the Auto Selection box in this window to one of the other options (eg. "Detect Separate Items") or setting the "Scan to" to a file.

Can't get HP309a wireless scanner to work

I recently upgraded to Lion, and now I find my HP309a series wireless all-in-one won't scan, either by using the buttons on the scanner itself, or by using Preview or Print/Scan on my Mac. The best I can get is "no document loaded" although of course there is.
The print function works just fine.
I've tried uninstalling all HP software and reloading new software from HP. Same results. I've tried all the solutions suggested on the HP site and none of them work. Of course, I've deleted and added the printer several times but that does nothing either.
Any suggestions?

Barbara B. wrote:
You must go into Applications>PSE 10>optional plug-ins>ImportModules, and move the TWAIN plugin into Plug-ins>Import Modules before you can scan with any scanner. However, if you must have rosetta to scan, you will not be able to scan into PSE 8,9, or 10, no matter whether Rosetta is installed on your mac or not. There is no longer any support for Rosetta in PSE since PSE 8 came out. In that case, you can either use Scan Gear or get a newer scanner, if there's no intel-native plugin on canon's download page for your model.
Thank you for answering me so quickly, Barbara B.
It is interesting to note that there is no longer any support for Rosetta in PSE since PSE 8. That really explains the problem. The optics of my scanner are really good and the scanner really does work well in the "right' software.
I did as you instructed: moved the TWAIN plugin from Optional plug-in>ImportModules to Plug-ins>ImportModules, and restarted the computer. Then I rebooted PSE 10. The TWAIN import did not load... does not even show up in as there but unloaded.
Any ideas? Could this be because I am using a trial version?

Issue getting Motorola 9060G scanner to work with 5508 WPA-TKIP

All,
We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller. I am having issues getting the scanner to connect with the new SSID. It looks like everything works fine with no security but once I start to enable WPA+WAP2 I get no connectivity. Laptops work fine just not the handheld. I have tried every combination I can think of for AES and TKIP under the WPA and WPA2 policies. I have also gone through the Cisco Best Practices guide for Motorola/Symbol Wireless Handheld Scanners and so far unless I have no security I cannot get things to work properly. I tried doing a debug client to see what or how the two are talking but I can only get results with security set to open. Just looking for other suggestions as to something that I might be missing. My controller is running 7.6.100
Thanks ...
Brent Berry

We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller.
Just be aware that the Wi-Fi Alliance has scheduled the "elimination" of TKIP. What you are about to do is a "temporary" solution. You can get the scanner to work now because you are using WLC firmwares that still support TKIP. However, if (in the future) you need to upgrade your controller's firmware to support newer wireless access points, your scanners may not work any more.
Read HERE.

Trying to get a code walkthrough to work - Bing Ads Api C# Web App

Hi,
I'm trying to get the C# Web App code walkthrough to work. I went through the steps written out, and pasted in the Client ID, Client Secret, RedirectionUri, and DeveloperToken values. When I run the app, it sends me to the redirection URI, with
"?code=" and a 36-character code added onto the address. Could you tell me why this is happening, and what I might need to do to get this working?
Thanks,
Mike

Hi Mike.
The current example assumes that you set the RedirectionUri to index.chtml, which admittedly isn't robust enough. We plan to update it. Typically as you are probably attempting, the callback after the user provides credentials would redirect
to a page other than index.chtml e.g. callback.chtml.
Short term solution is that you can update the RedirectionUri to either "YourSite\" or "YourSite\index.chtml", and the existing sample should run. Otherwise you can define a new callback page that handles the "?code" fragment
e.g. as follows:
// If the current HTTP request is a callback from the Microsoft Account authorization server,
// use the current request url containing authorization code to request new access and refresh tokens
if (Request["code"] != null)
await authorization.RequestAccessAndRefreshTokensAsync(Request.Url);
// Save the authorization object in a session for future requests.
Session["auth"] = authorization;
return await CallBingAdsServices((OAuthWebAuthCodeGrant)Session["auth"]);
Does this help? Please let me know if you have any other questions.
Best regards,
Eric

Can't get Canon Lide Scanner to work in PSE 10

I just belatedly upgraded to Snow Leopard... and got my PSE 6 to run without freezing by using a suggestion posted by Barbara B. ("Photoshop Elements for Snow Leopard") - deleting the Adobe Twain Driver. My Canon Lide 80 scanner always worked smoothly in PSE 6 in Snow Leopard, but PSE 6 was crashing prior to removing the Adobe Twain plug-in. Since I had not upgraded PSE in a while, I decided to download the trial of PSE 10 and put it through its paces before I purchased.
The first thing that I did was move the driver, ScanGear CS 7.2X into the import module as I had done in previous versions of PSE. The next thing that I did was make sure that Rosetta was loaded onto my operating system. I believe that with this new system Rosetta is automatically employed without having to put a check in the box as was with the case in Leopard, because there is no box to check, and the Apple care tech told me that it would run as needed. When I boot up PSE 10, I receive the message, "One or more plug-ins is currently not available on your system...", the system info states that it failed to load and the ScanGear CS 7.2X plug-in does not show up as a choice for inporting.
This is a great scanner, so I am unwilling to dump it, PSE 6 works if worse comes to worse, but I would like to upgrade to PSE 10. I am currently running on OS X 10.6.8.
Does anyone have a solution?

Barbara B. wrote:
You must go into Applications>PSE 10>optional plug-ins>ImportModules, and move the TWAIN plugin into Plug-ins>Import Modules before you can scan with any scanner. However, if you must have rosetta to scan, you will not be able to scan into PSE 8,9, or 10, no matter whether Rosetta is installed on your mac or not. There is no longer any support for Rosetta in PSE since PSE 8 came out. In that case, you can either use Scan Gear or get a newer scanner, if there's no intel-native plugin on canon's download page for your model.
Thank you for answering me so quickly, Barbara B.
It is interesting to note that there is no longer any support for Rosetta in PSE since PSE 8. That really explains the problem. The optics of my scanner are really good and the scanner really does work well in the "right' software.
I did as you instructed: moved the TWAIN plugin from Optional plug-in>ImportModules to Plug-ins>ImportModules, and restarted the computer. Then I rebooted PSE 10. The TWAIN import did not load... does not even show up in as there but unloaded.
Any ideas? Could this be because I am using a trial version?

So sick of trying to get iTunes 8.2 to work on Vista - 7 days of ****

After downloading £50+ worth of new music/audiobooks and tv shows last week, innocently clicked on 'upgrade to 8.2'; (yes I backed up my Library and hard disk first); result, the last 7 days of **** trying to get iTunes and my iPhone to sync. I'm so sick of this bloody iPhone, iTunes and Vista, if I could go out and purchase a replacement to iPhone and iTunes I would without a second thought.
I have tried absolutely everything posted on apple.com/itunes/support in the last 7 days - must have spent a good 4-5 hours a day over the last 7 days trying to fix this sodding fault.
At this point, I'm considering going back to CDs, and the simplicity of just putting a CD on and playing it. It seems but a far away, simple approach to listening to music, compared to the sodding **** of trying to get iTunes to work on my Vista Laptop.
So ****** off I'm thinking of getting rid of my iPhone (and yes I'm at the end of my contract) and going for anything that is Non-Apple.
Anyone else had this delightful experience with iTunes 8.1 and 8.2?

Read the iTouch forums and other iPhone forums... this is a big issue and a known bug. Apple contacted me right after I posted my issue. I downloaded it when it was released. My fix tonight was to downgrade to iTunes 8.1. This works for sure, so this is the only fix that I know truly works.

Help ! Trying to get PDF Prep Tool to work

Help... Iam trying to get the PDF PRep Tool from www.pdf-tools.com to work. I get a nativ error (se belove) when trying the first included demo.
Has anyone worked the PDF Prep Tool, and maybe can help out ?
My Specs:
Windows 2000 Server sp 3
JDK 1.4.1_01
My Error:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x1004A0DC
Function=[Unknown.]
Library=C:\WINNTFW1\system32\pdprep32.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
     at com.glance.pdf.pt.PTLib.PDocClose(Native Method)
     at com.glance.pdf.pt.PTDoc.close(PTDoc.java:209)
     at com.glance.pdf.engine.Generator.genPass(Generator.java:672)
     at com.glance.pdf.engine.Generator.generate(Generator.java:413)
     at FirstStep.main(FirstStep.java:60)
Dynamic libraries:
0x00400000 - 0x00406000      C:\Program\J2SDK_SE\bin\javaw.exe
0x77F80000 - 0x77FFB000      C:\WINNTFW1\System32\ntdll.dll
0x77DB0000 - 0x77E0B000      C:\WINNTFW1\system32\ADVAPI32.dll
0x77E80000 - 0x77F31000      C:\WINNTFW1\system32\KERNEL32.dll
0x77D30000 - 0x77DA1000      C:\WINNTFW1\system32\RPCRT4.dll
0x77E10000 - 0x77E6F000      C:\WINNTFW1\system32\USER32.dll
0x77F40000 - 0x77F79000      C:\WINNTFW1\system32\GDI32.dll
0x78000000 - 0x78046000      C:\WINNTFW1\system32\MSVCRT.dll
0x75E60000 - 0x75E7A000      C:\WINNTFW1\System32\IMM32.DLL
0x6CA60000 - 0x6CA68000      C:\WINNTFW1\System32\LPK.DLL
0x66650000 - 0x666A4000      C:\WINNTFW1\System32\USP10.dll
0x6D330000 - 0x6D45A000      C:\Program\J2SDK_SE\jre\bin\client\jvm.dll
0x77570000 - 0x775A0000      C:\WINNTFW1\System32\WINMM.dll
0x6D1D0000 - 0x6D1D7000      C:\Program\J2SDK_SE\jre\bin\hpi.dll
0x6D300000 - 0x6D30D000      C:\Program\J2SDK_SE\jre\bin\verify.dll
0x6D210000 - 0x6D229000      C:\Program\J2SDK_SE\jre\bin\java.dll
0x6D320000 - 0x6D32D000      C:\Program\J2SDK_SE\jre\bin\zip.dll
0x10000000 - 0x1008F000      C:\WINNTFW1\system32\pdprep32.dll
0x782F0000 - 0x78534000      C:\WINNTFW1\system32\SHELL32.dll
0x77C70000 - 0x77CBA000      C:\WINNTFW1\system32\SHLWAPI.dll
0x77B50000 - 0x77BD9000      C:\WINNTFW1\system32\COMCTL32.dll
0x77A50000 - 0x77B45000      C:\WINNTFW1\system32\ole32.dll
0x779B0000 - 0x77A4B000      C:\WINNTFW1\system32\OLEAUT32.dll
0x77920000 - 0x77943000      C:\WINNTFW1\system32\imagehlp.dll
0x72A00000 - 0x72A2D000      C:\WINNTFW1\system32\DBGHELP.dll
0x690A0000 - 0x690AB000      C:\WINNTFW1\System32\PSAPI.DLL
Local Time = Mon Jan 13 15:13:01 2003
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode)
# An error report file has been saved as hs_err_pid1964.log.
# Please refer to the file for further information.

Actually it is e-doc assembler im trying to get to work...:-)
(Is there an edit function in these forums ?)
/Ruben

Trying to get simple UDP Server to work

Hello
I am trying to get a simple UDP Server to work. I have written the Server and a Client and upto a point the program works. I can make a request from the client and the Server sees this and sends its own response. The problem is the client doesn't seem to receive this response. The error I get is 'java.net.SocketTimeoutException: Receive timed out'.
Below is the code for the Server;
        while (true) {
            try {
                for (i = 0; i < sendBuffer.length; i++)
                    sendBuffer[i] = 0;
                for (i = 0; i < receiveBuffer.length; i++)
                    receiveBuffer[i] = 0;
                serverSocket.receive(receivePacket);
                telemetryRequest = new String(receivePacket.getData(), 0, receivePacket.getLength());
                jTextFieldServerStatus.setText(telemetryRequest);
                receivePacket.setLength(receiveBuffer.length);
                sendTelemetry = new String("airspeed=" + Math.round(Float.valueOf((airspeed))));
                sendBuffer = sendTelemetry.getBytes("ASCII");
                sendPacket = new DatagramPacket(sendBuffer, sendBuffer.length, clientIPAddress, clientPort);
                sendPacket.setData(sendBuffer, 0, sendBuffer.length);
                serverSocket.send(sendPacket);
            } catch (IOException e) {
                jTextFieldServerStatus.setText("Error on server socket");
                return;
        }I have tested the Client against another UDP Server and this works, so I believe it is something in my Server code causing the problem.
If anyone has a solution to this problem I would really appreicate their help.
Regards
Gary

Cross post:
http://forum.java.sun.com/thread.jspa?threadID=792481&messageID=4503960#4503960

Trying to get my epson scanner to work

Similar Messages

Maybe you are looking for