Trying to Get Some Information Off the Computer
Hey.
I'm doing a powerpoint for a school project using the Microsoft Powerpoint System on the Mac. I need to be able to save it to some kind of disk, and be able to start it up on another teacher's regular PC. I'm putting in a blank disc, and I try to save it using the iDisk, or whatever, but it doesn't show up! I know the answer is probably really obvious, but I'm at a loss for what to do! If this is completely not right, then could someone just give me another explanation for moving all this information?
Thanks in advance,
Any help is GREATLY appreciated!
On the desktop, use Finder to go to the folder where you have saved your PowerPoint Presentation.
Insert a blank CD into the disk drive. After you see the icon for a CD on your desktop, click on the saved powerpoint presentation and while holding down the mouse button drag it, and drop it, on the CD icon.
Similar Messages
-
Itunes 11.4.0.18 crashing when clicking on app store
Itunes is getting crash when clicked on app store. I tried to get some information for this crash and got the above message in debugging mode. Please fix this if required but i am unable to open app store.Click here and follow the instructions to change the iTunes Store country.
(97125) -
Get some informations on the JVM : compile time, loading time
Hi everybody,
I'm running a simple jar application in command line that :
- starts
- calculates something
- stops
It's a simple test :D
I would like to get some informations :
- the number of loaded classes
- the time spent to load / compile classes
Typically, it's the TotalLoadedClassCount and the TotalCompilationtime in JConsole
Do you know a software to do it ?
Thanks for your help
ObelixHi,
I did some tests (powerPC603E 266hz/ 128Mo RAM / 64Mo ROM)
and I think that obfuscation has an good impact on loading classes only !
Please see the folowing results with a non obfuscated jar :
time java -jar none_obfuscated.jar
=====================================================================
Test with 'none_obfuscated.jar' (4.8M)
=====================================================================
- GoodMorning...
- Start your job at 19:52:45
- You must work today (load 2000 classes)
- Stop your job at 19:54:11
- GoodEvening...
- You worked for 85.934s today
==>> TotalCompilationTime : 2.731s
==>> TotalLoadedClassCount : 2468
real 1m 30.26s
user 1m 27.55s
sys 0m 2.66s
=====================================================================and with the same jar but obfuscated :
time java -jar obfuscated.jar
=====================================================================
Test with 'obfuscated.jar' (4.1M)
=====================================================================
- GoodMorning...
- Start your job at 19:54:16
- You must work today (load 2000 classes)
- Stop your job at 19:55:39
- GoodEvening...
- You worked for 83.392s today
==>> TotalCompilationTime : 2.721s
==>> TotalLoadedClassCount : 2468
real 1m 27.75s
user 1m 25.04s
sys 0m 2.65s
=====================================================================I did 3 times this tests and I can notice this :
- no differences for TotalCompilationTime
- no differences for TotalLoadedClassCount (of course)
- a difference of 2.54s for working time (load 2000 classes)
In conclusion, obfuscated code increase, a little bit, the loading classes but not the compilation time !
We can calculate the starting time of the JVM :
- none obfuscated : 1m 30.26s - 85.934s = 4.326s
- obfuscated : 1m 27.75s - 83.392s = 4.358s
What do you think about it ?
Thank for your help.
Obelix
Edited by: obelix on Jul 29, 2008 3:02 PM -
Trying to get to app "off" the desktop, clamshell to internal display probl
I'm only seeing this problem with one application but it's a problem.
For a while now I've been running in clamshell mode with my external display at a fairly high resolution. I had an application window in the far right hand corner of my screen where I could use it as needed. I shut down and am now working from the internal display which has a lot lower resolution.
When I invoke almost all the applications, they are smart enough to realize the reduced desktop resolution and open somewhere on the desktop. However there is on application that is trying to position in the same absolute position which means I don't get any access to that application. I know the app is there because if I scroll from one panel to another in Spaces, I see the application window go by.
Is there any way to "scroll off" the desktop to that position and drag the app window back to the current desktop? The only solution I found was to remember to move the application to some other place on the desktop before I stop using clamshell mode.
ThanksJust hold the app down until the all start to 'wiggle', then drag the app or apps you don't want from your home page to a new page.
You can't delete it, or any of the standard iPhone apps, but this gets them out of your way. -
Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!
Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus -
I bought a new computer and am trying to get my library from the old computer to the new one and download some more songs. I have downloaded itunes to my new computer but can't get any further. sorry, I am a computer dinosaur. Thanks for your help.
You need to contact Apple, either through the link in that article or by phoning them and asking for the Account Security team.
(85855) -
I got a new ipad mini and chose to set up as a copy of my iPad. Didn't sync the music on however as it is a smaller model, not enough room. Now trying to get some pictures and music on. Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway. Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?" So I hit cancel. Have tried several times, same thing. What can I try?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?
Hello there, Gemss.
The following Knowledge Base article offers up some great recommendations for the issue you're describing:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Although all of the scenarios may be applicable, many folks find that the following section helps resolve their issue most often:
Authorize using the correct account name
The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
Select a purchased song in your library and choose File > Get Info.
Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.
Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I am trying to play some videos from the internet and I get the message "missing plug in". I click on the message and downlaod adobe flash player as prompted. When I log in again to play the videos, I still get the missing plug in message. Any suggestions??
that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).
-
Usually, there are controls at the top & bottom of the screen, & I can log off whatever program I'm in, but now Firefox is filling the whole screen: I can go from one tab to another within Firefox; however, I can't get out of Firefox without logging off the computer.
It is possible that the screen is too high and that the title bar and status bar do not show.
Open the system menu via Alt+Space and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
Also make sure that you are not in "View > Full Screen" mode.
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf<br />
(caution: do not delete the localstore.rdf file in the Firefox program installation folder) -
I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?
No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa -
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
Maybe you are looking for
-
WRT150n stopped working...Power LED OFF
Hi, My router suddenly stopped working. LEDs are glowing in weird manner. Power LED is OFF LAN/Internet LED are ON (even though nothing is connected to it). I dont know whats wrong. Coincidently, the same thing has happened to my previous netgear rou
-
Best Practice for SAP BW 3.5 Installation (post install) procedure
Hi, I have installed BW 3.5 on windows platform, database is Oracle 9.2. I have put Bi_Content as Add-on and followed these steps. Install oracle Install Oracle patch Install PBW ABAP was Activate TMS Apply new SPAM,support packages and upgrade PI_Ba
-
How to Define MQ message expire time in OSB Business service.
Hi, Please let me know the option in OSB business service to set the expiration time for MQ messages. Is it possible? Thanks, karthik.
-
For login I dont use masterppassword, but my passwords are not saved, why?
I have used Firefox for a long time. In the security panel the"save passwords" is checked. But only the password to web mail has ever been saved. I haven't worried about in the past, but now I really want to use that feature. How can I revive it?
-
Kernel panic. Replaced RAM and Reinstalled the os x 10.6.8
lately I have replace the ram and renstalled os x 10.6.8. Did the hardware test which showed every thing is fine but still the kernel panic is happening. If any one can help plz help. Interval Since Last Panic Report: 113189 sec Panics Since Last Re