Trying to get team planner to show more information

Is there any way to get team planner to show more information about the tasks? In calendar view, you can set the bars to display all sorts of information, but I can't seem to find the equivalent in Team planner. I want the bars to display, hours work and
one custom field, as well as the task name.
On this subject, I'm sure I must be missing something, but project seems to have missed the point of breaking tasks down into manageable sections. For example, I have a project, say 'Build house', summary tasks might be 'build conservatory', 'build kitchen'.
Each might have 'put in windows', the first task of which might be to get quotes. All that then appears in team planner, or any of the resource management views is the task name 'get quote', with no idea which summary task it belongs to. I have to write the
correct summary task in a custom field for each task, surely this can't be the best way to do it?

Hi,
The good news is that the resouce usage view has a field called Task Summary Name, so no need for a custom field.
The bad news is that yes, you cannot modify the Team Planner view.
Hope this helps,

Similar Messages

  • Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

    Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

    Hi Maarton,
    Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    -Ankit

  • [Devices Page] Show more information for the offline devices

    Spotify should show more information for the offline devices that are under a user's account. The main reason I ask is because I have noticed on numerous occasuions that multiple devices in the list show the exact same name.
    An example in the screenshot below:
    It would be great if each device had more information e.g MAC address, last IP access, computer name and so forth.

    Updated: 2015-07-28
    Marked as new idea and edited the title slightly to make it easier to find via search. ;)
    You might also want to add your kudos to a similar idea about the ability to name offline devices here.

  • Trying to get rid of malware show password, any suggestions??

    Somehow got infected with this malware "show password" I tried disabling it. no help.. tried removing firefox and reinstalling it.. no help.. tried resetting to default values.. no help When I tried deleting and reinstalling I deleted the folders in c/program (x86) files/mozilla.. still no help.. How do I get rid of this thing?? Thanks Don Sutherland

    If there is not a Remove button for it on the Add-ons page, Firefox may be finding it in one of three places:
    (1) The shared extensions folder in the Program Files path - you already cleared this by deleting the entire set of folders.
    (2) A little-used shared Extensions folder here (type or paste this into the Start menu search box and press Enter):
    %APPDATA%\Mozilla\Extensions\
    (3) A registry entry created by the program's installer
    Usually the first step is to uninstall the culprit, if you haven't already. Open the Windows Control Panel, Uninstall a Program, and click the "Installed on" column heading to search for bundled items that may not have an obvious name. Remove anything unrecognized or untrusted.
    If the uninstaller doesn't clean out the reference in the registry (Firefox may not check until the next startup), some manual digging might be required.
    Any luck tracking it down?

  • Trying to get a cell to show 0%

    Hi im trying to do a basic sales vs target sheet, target being represented as %.
    I want to know what to put in the total % cell to get it to show as 0% when nothing has been inputted into the sales colum.

    Hi Daniel,
    Enter your target as a number, not as a percent. Format the cell as Currency. See cell A1 below. Note that the goal/target has been entered as a whole number and formatted to show zero decimal places.
    Enter each sales total as a number. Format as Currency. See the rest of the cells in  column A. Note that these have been formatted to show two decimal places. Empty cells here have had no data entered.
    B2 and the cells below it in column B contain the formula:
    =A2/$A$1
    These cells are formated as Percentages, with no decimal places. Note that B2, where a zero value has been entered in column A, and several other rows where the cell in column A is empty, all show 0%.
    Regards,
    Barry

  • I am new to this IPOD thing.  I am trying to get rid of playlists showing in the left hand column of my itunes window? how can I get rid of these?

    I am trying to learn how to add and delete playlists.  I have some libraries showing up on the left hand side of my i-tunes screen on my computer with duplicates and triplicates.  How do I delete these. 

    ok, are you using mac or windows?

  • [SOLVED] Trying to get ADF Tree to show Distinct results only

    Hello,
    I am trying to make an ADF Tree in JDeveloper 10.1.3.3.0.4157.
    I have it show two levels, each level is from one column of my table.
    For example, if I had columns
    Sec_1
    1
    1
    2
    2
    and
    Sec_2
    4
    5
    6
    7
    I want it to show a tree that has
    1
    ---4
    ---5
    2
    ---6
    ---7
    But instead it shows as
    1
    ---4
    ---5
    1
    ---4
    ---5
    2
    ---6
    ---7
    2
    ---6
    ---7
    Is there any way I can fix this? I've tried changing my view objects to specify SELECT DISTINCT but that doesn't work because I need to include a primary key in each view object and the primary keys are of course already distinct.
    Sorry for the poor diagrams but I couldn't think of a better way to explain it.
    Thanks
    Message was edited by:
    TheNelson

    I guess I sould clarify a bit:
    I have a dropdown menu elsewhere on the form that chooses something from a separate column (main_column). When that is selected, the tree appears and shows the columns I mentioned. Sorry, I didn't think this other one might be relevant.
    So I have
    main_column
    a
    a
    a
    a
    b
    b
    b
    b
    Sec_1
    1
    1
    2
    2
    3
    3
    4
    4
    Sec_2
    3
    4
    5
    6
    3
    4
    5
    6
    The Master VO is for the main_view, and it then had a detail Sec_1 and in that is a detail Sec_2.
    I've made view links between all of them.
    The problem happens like I said in my above post is that the main_column (and a few others) are primary keys and need to be included. Especially main_column needs to be included in my view object because it is used in the view link with the dropdown box.
    Does that make sense? Sorry for not describing this well earlier, I was trying to simplify it.
    Basically the problem is:
    A view object needs to have a primary key
    A primary key has every value distinct
    using SELECT DISTINCT therefore selects every row.
    Message was edited by:
    TheNelson

  • Trying to get video time to show up in large movie so I can extract clips by when they appear in the video.

    I've uploaded a 40 minute video and would like to break it down into several smaller video clips for YouTube. I have written down the time segments each clip should be. Is there a way to have the entire duration of the video show up? Right now it says that the clip is 40 minutes, but I need to know where each minute and second is to break this down into what I need.
    Help is very much appreciated!

    It only shows the time of clips in a Project not in Events.
    Can you move the entire clip into a Project and then cut it down?
    Matt

  • Trying to get various nodes to show with onclick

    I've successfully managed to deploy SPRY which is marvelous.
    However I've run into a wall.
    I have a set of links which were propagated via a cold fusion
    function.
    <cfloop condition="x lt ArrayLen(r_links)">
    <cfset x=x+1>
    <cfoutput>
    <span onClick="dsSpecials.setCurrentRow(#x-1#);"
    class="kklink">#r_links[x]#</span>   
    </cfoutput>
    </cfloop>
    Within the cfm document I have the following statement
    <div id="Specials_DIV" spry:region="dsSpecials"
    align="center">
    <!--Display the data in a table-->
    <table id="Specials_Table" background="{bg}"
    class="infoAreaMainPage">
    <tr >
    <td>
    <div class="navbar" align="center"><cfinclude
    template="headerAJAX.cfm"></div>
    </td>
    </tr>
    <tr spry:"dsSpecials">
    <td>
    <h3 class="page" spry:detailregion="dsSpecials"
    spry:content="{id}">{id}</h3>
    <div class="infoAreaMainPageInner"
    spry:detailregion="dsSpecials" spry:content="{info}">
    {info}
    </div>
    </td>
    </tr>
    </table>
    Now my question is; Why is there no data change when I click
    on the links? What am I missing?
    I'd appreciate all your help here

    I believe your problem is due to the fact that you are
    nesting a spry:detailregion *inside* a spry:region.
    Spry currently does not support nested regions. If you really
    want the entire table to update whenever you click on one of your
    links, remove the spry:detailregion on the h3 and make the
    Specials_DIV be a spry:detailregion.
    --== Kin ==--

  • Trying to get spry menu to show visited links with different color

    I know there is Javascript involved I was just wondering if Anyone has sent it up yet. as a downloadable@ file

    Visited links need not be JavaScript driven.  They are primarily CSS driven.
      /* unvisited link */
    a:link {
        color: #FF0000;
    /* visited link */
    a:visited {
        color: #00FF00;
    /* mouse over link */
    a:hover {
        color: #FF00FF;
    /* selected link */
    a:active,
    a:focus {
         color: #0000FF;
    FYI:  Spry is dead.  Adobe abandoned it in late 2012.
    Nancy O.

  • Just trying to get this stuff to show up!

    Hi
    Do the includes need to be in a certain place? When i test
    the webpages i've made with spry on my local machine, they have no
    problem working correctly. When I upload them to the server (and
    make sure that all the files are uploaded) --- it doesn't seem to
    pull the data in.
    here's the site link...
    http://www.studio-rasa.com/Store/Store_View_All3.html
    I'm pretty new at this and probably have made a really
    obvious mistake - any help welcome. I'm thinking maybe i'm jumping
    in to this spry stuff to early - or maybe it's not for me!
    thanks!

    Most servers are case sensitive when it comes to file names.
    You have to make sure you include "SpryData.js" instead of
    "sprydata.js".
    I see this in your file:
    <script type="text/javascript"
    src="includes/sprydata.js"></script>
    --== Kin ==--

  • Finder show more information like Date Modified

    When I do a an apple-F to find file modified by date (I used today in this scenario) it just shows file name, kind, and last opened, not modified date. How do I add that to the apple-F list? Or, in general, how do I change what information is displayed in Finder? Thank you, Ron

    rflan444 wrote:
    the only option I get is a checkbox that says "always open in list view" and nothing else.
    Apologies for raising your hopes. It seems it's a difference between OS X 10.5 and 10.6. In OS X 10.6 I see that plus options for icon size, text size, eight column options, and three other miscellaneous things, but I just verified that OS X 10.5 lacks those other options.

  • How do I show more information for result set, I need company name, company address and company phone number to show. Now it is just company name and company address no telephone number, I need the number to show as well in the first result set

    The result set I get for a search now only shows the company name and address, if I want the telephone number of the company in the result set, I have to click on the link to go the site information to get the number. I want the company name, address and phone number to show up in the result set without having to click on each hyperlink to get the telephone number...

    ???
    See my profile at the left for information you are missing.
    Who, when, why, how, how much, what is the URL

  • Team Planner not working. Click on Team Planner and nothing happens.

    I have Project Professional 2010 and using with Project Server 2010. When I go the the View ribbon and click on Team Planner, nothing happens. Is this a view or a piece of functionality? I looked in Organizer and also do not see any view named Team Planner.
    Not sure why this is not working. Anyone know nwhat the issue may be and how to get Team PLanner working?

    Rick VF --
    Navigate to the Task ribbon and then click the Gantt Chart pick list button (little down-arrow below the Gantt Chart button).  Examine the list of Views shown on the pick list.  Do you see the Team Planner view listed?  If not, click the More
    Views item.  In the Organizer dialog, do you see the Team Planner view listed in the left side of the dialog?  If the answer is NO to both questions, then I would suspect that someone has intentionally deleted this new default View from your Microsoft
    Project 2010, and you will probably need to reinstall the software to get it back.  By default, the Team Planner view should be available to you in Microsoft Project 2010.  Let us know if this helps.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • How can I get my iTouch to show on my computer screen? What cable is needed and where I can get it. (Apple to female VGA)

    Trying to get my iTouch to show on my computer screen NOT A TV.
    Please help I think I need a female VGA to a apple connector anyone know?

    Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

Maybe you are looking for