Trying to go legit, but it's not working

I've just recently purchased Final Cut Studio 3. It wasn't directly from Apple, but a third-party retailer: www.cheapestlegalsoftware.com. It seemed (and still seems) legit (or so I hope). I've installed the Studio and all programs run fine except for Motion. Every time I try to open Motion, it prompts for my name and serial number again, and then says the serial isn't valid. I've tried deleting the SystemID from the ProApps folder, and Final Cut will open again, accept the serial and work fine. However, it's always the same thing with Motion.
I have had Final Cut Studio installed before, the previous time from a borrowed copy from a friend, which I know isn't Kosher, but with this I've been trying to to go with a legitimate copy of the program.
Why would the serial be valid for all of the programs except Motion?

Motion is newer software and may have a more up to date list of banned serials?
Patrick

Similar Messages

  • I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

    I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
    Things to note:
    I have been unable to update firmware on this computer for about a year now. Im not sure why.
    I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
    any thoughts on the matter would be greatly appreciated, thank you.

    Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
    It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
    Clinton

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
    I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
    In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
    Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
    Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
    Hope this helps!

  • My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • TS1365 My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking.

    My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking. How can I fix it?

    cooldedar wrote:
    I reconnected charger and the green light showing with blinking.
    Well the blinking light shows it's charging, however just to make sure.
    Reset the SMC, then connect the machine to a power source that doesn't have a lot of other power items on the same lines (in the walls) in the same room and see how it is in the morning.
    For instance use a powerline in another spare room that isn't being used as much.
    https://support.apple.com/kb/HT3964

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • I've tried so many things but itunes is not working

    I tried to install itunes 5 last monday but it did not install successfully and I encountered many of the error messages people have already detailed. (I'll know next time to check these boards before faithfully clicking on the download button - I could have saved myself so much hassle!)
    I followed the instructions in Dimitry's post - uninstalled bonjour/quicktime etc and then managed to do a system restore. The system restore went ok and itunes seemed to be working but it made the computer run incredibly slow and messed up the 'Ahead Nero- Burning Rom' program.
    On saturday, we ran a defrag to see if that would speed up the computer - that took nearly 7 hours to run! I then did another system restore which has made the computer run properly. But itunes did not work, so I tried to reinstall it from the disk that came with the ipod. It gets to the end of the installation and says that a newer version is stored on the computer and so cannot install.
    I then picked up a download for itunes 4.9 from one of these threads and tried to install that version, but again get the same message that there's a newer version on the computer so cannot install.
    I think I have itunes 4.8 on the computer, but when i try and open it, I get a message that itunes cannot run because some of its required files are missing and i need to reinstall itunes! (I don't think quicktime is installed correctly on the computer either as i get an error message - is the standalone download on the apple site safe to use?)
    I think i need to completely uninstall itunes and then reinstall it, but i'm scared of losing all my music. I cannot back my music up as the burning-rom program is not working - i tried reinstalling it, but i need to enter a serial number to complete the installation, but i don't have one as it all came in the bundle with the computer.
    Any advice greatfully received!

    Hi B
    I meticulously followed the instructions but I still haven't been able to completely uninstall itunes and the ipod.
    When I right-click on the bin folder in the ipod folder in program files and then choose delete, I get the following message:
    "Cannot delete iPodServiceLocalized.dll: Access is denied. Make sure the disk is not full or write-protected and that the file is currently not in use."
    When I right-click on the Quicktime folder in program files, I get the following message:
    "Cannot delete QTTASK.EXE: Access is denied. Make sure the disk is not full or write-protected and that the file is currently not in use."
    When i open the windows installer cleanup tool I cannot see itunes/ipod/quicktime in the list.
    I suspect this is something to do with administrator rights? How do I log in as an administrator? Only me and my husband use the computer, but we don't log in under any different IDs or anything, we just switch it on and start using it?!
    I tried installing 4.9 from one of the other threads anyway, but I still get the message that a newer version of itunes is installed so it cannot continue. The itunes in the ipod program file shows as 4.8.0.
    Look forward to your advice again.
    Thanks, Amanda.

  • The app anime box will not save any pics to my photo library i tryed reinstalling the app but it did not work

    the app anime box will not save any pics to my photo library i tryed reinstalling the app but it did not work

    there are many apps out for ios so asking for spc app issues here is like asking if anybody know a guy called mike
    asking at the developer of the apps would be much adviced
    http://bisimplex.com/

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • How do I transfere a playlist from my iPod to my computer, which I made on my computer from all my songs. I've tried export and import, but they are not working.

    I accidently created a playlist sitting at my computer but saved to my iPod. I would like the playlist on my Itunes library so my husband can put the play list on his ipod which is also synced to my/our computer.
    I tried to export the playlist then import. It seems like it imported, but i don't see it. How do I find it? on the videos I watched the playlist just shows up in the iTunes library playlist column.
    It did not. What do I do next?
    Thanks

    Transfer files between your iPod touch, iPhone, or iPad and your computer
    Connect your device to your computer.
    Click the device button, then click Apps.
    Below File Sharing (you might need to scroll down to see it), in the list on the left, select the app on your device that you want to transfer a file to or from.
    Do one of the following:
    Transfer a file from your computer to your device: Click Add, select the file you want to transfer, and click Open.
    Transfer a file from your device to your computer: Select the file you want to transfer in the list on the right, click “Save to,” select where you want to save the file, and click Open.
    The file is transferred to your device or saved in the location you specified on your computer.
    On your device, the file can be opened in the app you selected in step 3.
    Hope this helps

  • My ipad is bIocked and I get this message "Icloud security copy is unable to access my account" Review account information and make adjustments .......   I ve tried a few things but they do not work ... any comments as to how i should proceed ?

    Hey You all .... Please give me a hand over here .... My Ipad is suddenly blocked ..... Using another computer I signed into my appleid account and checked all the categories to make sure I did not have pending messages .. I even reset my password, security questions, etc but did not see anything related to iCloud security copy or anything of that sort .... Again ... my Ipad is frozzen  .... anyone has a tip or even better a solution?
    Thank You ...Nerva

    Call Apple 1-800-MY-APPLE and they can get into your account and fix it.

  • HT204144 I am on mac mini (mid 2011) and iphone 6 and trying to use airdrop but it is not working.

    I followed all instructions but under mac finder, air drop is simply blank. I have set-up everyone on airdrop on iphone 6 in control center. Am I missing something. I am also on same network.

    I read this paragraph:
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model. To transfer files between two Mac computers, you need one of the Mac models listed below and OS X Lion or later.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    --end--
    So I am using mac mini mid 2011 and according to this line, I may not use it and need mac 2012, right? but why air drop is showing here on my mac mini is due to fact that transfer between 2 mac computers is possible if one is even of less than 2012 make.
    I think I am clear now. Thank you and see if you have any thought on this?

  • Using a PC; converting a Word 2010 document to PDF; upon completion the PDF document has a dark and/or patterned background; I have tried "removing" the background but that has not worked.

    Can someone help me remove what appears to be a 'background' that is created when converting a Word 2010 doc to a PDF format.  I am using the 'save as' method and selecting PDF as the file type.  I have used this method for over a year and have just had this "background" problem today.  It is not happening on all documents; so far it's just happened on 2 resumes but not on the accompanying cover letters which I think is very odd.
    Thanks for any help you can provide!

    Sara –
    I’ve attached the converted documents so you can see what I mean.  The Word document was not shaded in these ways; it was just a white background…or no background at all.
    I don’t know if these were created from scanned documents.
    Thanks!
    Sue Carline
    Operations Assistant
    [email protected]
    Telephone: 217.241.5400
    Fax: 217.241.5401
    3901 Wood Duck Dr., Ste. E / Springfield, IL 62711
    Web<http://www.paulygroup.com/>  / Twitter<https://twitter.com/PaulyGroupInc>  /  LinkedIn<http://www.linkedin.com/pub/pauly-group-inc/66/229/a73>

Maybe you are looking for

  • Hyperlinks from Outlook 2010 don't work anymore (Firefox is my default browser)

    Since I installed IE 9 I can't use Hyperlinks in Outlook anylonger (Firefox remains my default browser!). I tried already a) set IE 9 default (Hyperlinks works) and switch back to Firefox (Error message and Hyperlinks don't work) b) "Start" + R with

  • In BB the page size comes diff for diff pages

    Hello, I am using obiee 11g. I am using briefing book.When i add more then one report to the brieifng book i observed,after i download that the PDF size(length and width) is not coming same for all the PDF pages. It's coming different for different p

  • About about scripting language

    I'm looking to getting some training on scripting language to use on SCCM.  Any advise which I should focus on?  VBscript or Powershell.  I need to create Configuration Baselines and most of the examples I've seen uses scripting.   Also can anyone su

  • Adobe Audition issue

    Hello everyone. First of all, i would like to thank you for your time in reading this. I have a problem that happened when i put together my new pc I work on Adobe Audition 1.5 from my old pc and when i used to work, i could import MP3's no problem a

  • Workflow/outlook express

    Hi guru    I have made a workflow for PO.Its working fine.Now my requirement is i have to get mails in outlook express also.Is it possible,Guide me please Thanks in advance Balaji