Trying to have pages open in same window

Hello! Total newbie here just getting my feet wet in iWeb.
Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
Take a look to see what I mean: http://overcat.net/home.html
Thanx so much for whatever help anyone can provide.
Message was edited by: noisejoke

I'm assuming you mean the little button in the upper right corner.
No. The little green button in the upper left-hand corner. BTW, whether you can control the initial window's size is application-specific. Some, like Word 2004 remember when launching a new window; however, you might have to open each previously saved document, resize it, and save it. If an application doesn't offer that feature, then you'll have to take it up with the creator.

Similar Messages

External page opened in same window

Not sure if this is the right place for this but thought I'd try. I have a product page with a link that says options. What I want is that when the "options" link is pressed I want an external page that would be relativly small to open infront of the product page but in the same window with the product page ghosted out, much like many websites do with a photo slide show. Any direction or ideas is greatly appreciated. Thanks

Google "thickbox" for one way to do exactly this. Alternatively, there are commercial extensions for DW that will do the same - see for example http://www.projectseven.com -> LightShowMagic.

Pages won't open in same window

Hello! Total newbie here just getting my feet wet in iWeb.
Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
Take a look to see what I mean: http://overcat.net/home.html
Thanx so much for whatever help anyone can provide.

Hi Guys. Thanks so much for replying.
Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
I really appreciate all the input folks.
Dave

How to open all the pages in the same window?

I have set up 8 pages in my website. And i want to open the pages in the SAME window. What should i do?
P.S. I nearly follow all the styles and command made in the video of 'Bayside Cable Car Website'. The pages should be opened under the navigation bar. However, i cannot do so.
Please help.
Thanks a lot.

the_shocker wrote:
I see no point in contributing dumb and useless stuff just to justify an ego...pointless....but kids hey.
Wait, are you talking about your post or someone else's? It seems double standard and oxymoronic for you to contribute dumb and useless stuff about dumb and useless stuff just to justify your ego... pointless... but old people hey.
best,
Shocker
Far too easy to wind-up......keeps me entertained though, thanks.

The "+" sign which opens NEW TAB has stopped working. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

The "+" sign which opens NEW TAB has stopped working suddenly. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

Flash URL open in same window

Hello. I have a flash slide on my site. The slide has next and previous buttons to either move to the next slide or the previous slide. Each slide is only an image. When you click a particular image it takes you to the page specific to the image you clicked.
My issue is this:
When you click the image, it opens the page in a new window. I would like to have the window open in the same window, but having issues figuring out how to do it.
The flash is controled by an image.xml script. I've added target= "_blank" to the xml, but the URLs are still opening in a seperate window. Any ideas how to get this done? I didnt create the flash, is it possible the issues lies within the .fla file?
Below is a sample of images.xml
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<images>
     <pic>
        <image>imagesimage.jpg</image>
        <caption>Some Service</caption>
        <url target="_blank"> http://www.something.com</url>
    </pic>
     <pic>
        <image>images/image.jpg</image>
        <caption>Some Service</caption>
        <url target="_blank">http://www.something.com</url>
    </pic>
    <pic>
        <image>images/image.jpg</image>
        <caption>Some Service</caption>
        <url target="_blank">http://www.something.com</url>
    </pic>
    <pic>
        <image>images/image.jpg</image>
        <caption>Some Service</caption>
        <url target="_blank">http://www.something.com</url>
    </pic>
    <pic>
        <image>images/image.jpg</image>
        <caption>Some Service</caption>
                <url target="_blank">http://www.something.com</url>
    </pic>
    <pic>
        <image>images/image.jpg</image>
        <caption>Some Service</caption>
        <url target="_blank">http://www.something.com</url>
    </pic>
</images>

Ned, thanks for the resonse. I've changed the xml file from _blank to _self, but still openes in a seperate window. In Firefox it opens in new tab. In IE it openes in a completely new window.
I've cleared my cache, closed the browser, and tried again. Still openes in seperate window. Think its within the action script?

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

Portal favorites open in same window after upgrade

Dear Experts,
After upgrade Portal from EP 7.0.1 SP3 TO SP8 KMC Patch 1, we are facing some issues, the issue is, clicking on the favorites link opens the page in the same window. But in the page properties we have mentioned to open in a new window and via detailed navigation it is opening in the new window only. But when we add this page in portal favorites and click on the link from favorites, it is opening in the same screen.
Thanks,
Jay

Hi Guys. Thanks so much for replying.
Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
I really appreciate all the input folks.
Dave

Navigate to another page in the same window problem

Hi,
I have a problem with the following scenario:
When a user clicks on a link in a portal, a web dynpro page opens in new window with the url similar to this
http://server:port/irj/servlet/prt/portal/prtmode/runtime/prtroot/pcd!3aportal_content!2fCompany!2fIntranet_v2!2fApplications!2fZZ!2fPages!2fBrowseCopies
So basically in this way we only want to display this single application, without portal top level navigation, inner page, masthead etc.
The problem occurs when we try to implement navigation from this web dynpro application to another page
When we use WDPortalNavigation a new window opens but we want the navigation to happen in the same window.
We cannot use LinkToUrl control with _self parameter because its not supported.
We also cannot use HttpServletResponse by getting it through com.sap.tc.webdynpro.services.sal.adapter.core.IWDWebContextAdapter class.
We also cannot use ExitPlugs because the error occurs with the message that the ExitPlugs cannot be used in portal.
Basically I need a redirect to another page. Any ideas how to solve this problem?
Regards,
Ladislav

Hi,
the link which initially opens this web dynpro application page is contained in a html page.
Here is the code:
WDPortalNavigation.navigateAbsolute(
"ROLES://portal_content/Company/Intranet_v2/Applications/ZZ/Pages/PurchaseRequests",
WDPortalNavigationMode.SHOW_INPLACE,
WDPortalNavigationHistoryMode.NO_HISTORY,
"requestNr="+wdContext.currentContextElement().getRequestNr());
Regards,
Ladislav
Edited by: Ladislav Pomezny on Jul 2, 2009 1:23 PM

When I print from Gmail, I can't return to my e-mail and have to open another browser window. The back button become inactive.

While using Gmail, when I print e-mail I can't return to my inbox or any other Gmail option. I am left "stuck" at the print window and have to open another browser window each time and go back into e-mail. Usually, I am still logged in after doing this, but sometimes I have to login to e-mail again. Thanks.

How are you trying to change it ?
You should be able to log out of an account by clicking on it at the top left of the store's pages on your computer's iTunes, or via the Store > Sign Out menu option (if you are using a PC and the drop-down menus aren't showing at the top of iTunes then control-B should get them to show). You can then sign in with your own account (the Store > Sign Out menu option should change to a Sign In option) - does that work ?

HTML and XML files open in same window(KM Navigation iView)

Hi All,
I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
Thanks & Regards,
Venkatesh R

Hi ,
check the below thread and try options mentioned in it
https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
Koti Reddy

XML Edit Form should open in Same window (Not a popup).

Hi all,
I have requirement to open the Edit form in Same window (Not a popup).
Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
Its possible? How to achieve this? Helpful replies will be appreciated.
Thanks and Regards
Thillai J

Not solved

Menubuilder- Open in Same Window?

I have the advanced link setting for my links as "Open in
same window." The links continue to open in new windows. Is this
feature not desinged to launch the files in the same window as the
menu. Please help. Thanks.

Hi MissDona
I'm going to say "it depends". Normally, this is the default
behavior. But it likely will depend on the output type you are
creating. For example (and I'm somewhat assuming you fall into this
category) if you create .EXE output from MenuBuilder, a new
instance or window always opens, as MenuBuilder packages up the
Flash Player inside the .EXE. Thus, this version of the player runs
from a temporary location and has no clue about other movies and
whatnot.
Cheers... Rick

Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

Hi Peter,
The results:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:3:27
Disk Information:
          Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 319.21 GB (121.43 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Dell Dell USB Keyboard
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
          Microsoft Microsoft Wireless Optical Mouse® 1.00
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.Cycling74.driver.Soundflower          (1.5.1)
          com.sophos.kext.sav          (8.0.14)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.sophos.autoupdate.plist
          [loaded] com.sophos.intercheck.plist
          [loaded] com.sophos.notification.plist
Launch Agents:
          [loaded] com.sophos.uiserver.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.plexapp.mediaserver.plist
          [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          Safari
          iTunesHelper
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          Google Earth Web Plug-in.plugin
          iPhotoPhotocast.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              13%          Microsoft Word
              11%          InterCheck
               4%          WindowServer
               1%          Dock
               1%          com.apple.WebKit.Networking
               1%          sharingd
               0%          Safari
               0%          Microsoft Excel
               0%          Plex Media Server
               0%          mdworker
Top Processes by Memory:
          197 MB             Microsoft Word
          139 MB             WindowServer
          123 MB             InterCheck
          82 MB              Preview
          82 MB              com.apple.IconServicesAgent
          78 MB              talagent
          74 MB              com.apple.WebKit.WebContent
          70 MB              Mail
          66 MB              Microsoft Excel
          49 MB              Messages
Virtual Memory Statistics:
          1011 MB            Free RAM
          1.62 GB            Active RAM
          651 MB             Inactive RAM
          651 MB             Wired RAM
          311 MB             Page-ins
          0 B                Page-outs
Regards
Kym

How to have web page open in same browser window after redirect in Flash video placed in Dreamweaver?

Hello,
Would be grateful if anyone can help me.
website: www.Paris-Pet.com
Currently, a flash video plays on the index page. The following action is placed in the last frame of the video in Flash:
navigateToURL(new URLRequest("http://www.paris-pet.com/home.html"));
This is working as intended with one exception: Instead of directing to the home page from the index page when the video is completed, it opens up the home page in a second browser window, leaving the empty browser window of the flash movie. This is not the seamless design I was hoping for, and I've also been told on some computers, blocking pop up windows is preventing them from smoothly transitioning to the rest of the web site.
I would like the redirect to open the home page in the same browser window as the movie in the index page played.
Please help. Print designer in over her head.
JM

Brilliant, Jon. Thank you so much. For those of you who stumble on this, I did have a tiny bit of trouble when I edited the actionscript; the video didn't play as expected. After trial and error, this is the code that worked both in playing the video and opening up in the same browser window:
navigateToURL(new URLRequest("http://www.paris-pet.com/home.html"),"_self");
The difference seems to be this: ") before the comma prior to "_self");
Again, Jon -- thanks!
Jack

Trying to have pages open in same window

Similar Messages

Maybe you are looking for