Trying to identify which Clip I have so that I can start with Rockbox
Hi, I have this Clip (Amazon), but it's hard to find out which model it is as regards what I should choose when installing Rockbox. I'd be grateful if anyone could tell me. Also I bought a 32gb Sandisk memory card (Amazon again) for the Clip, and am curious that the Rockbox installer lets me choose that as a potential target for the install. Maybe it's a Mac thing, but the memory card mounts as a separate volume when you connect the Clip via USB. My other big question is, once I have identified the model, where can I find the boot file that the installer needs to start the Rockbox install? The pop-up in Rockbox pointed me here, so I guess I'm following a familiar path (!), but I can't see a pinned post about it anywhere. Would be immensely grateful for a clue.
twoshedsmcginty wrote:
Hi,
I have this Clip (Amazon), but it's hard to find out which model it is as regards what I should choose when installing Rockbox. I'd be grateful if anyone could tell me.
Also I bought a 32gb Sandisk memory card (Amazon again) for the Clip, and am curious that the Rockbox installer lets me choose that as a potential target for the install. Maybe it's a Mac thing, but the memory card mounts as a separate volume when you connect the Clip via USB.
My other big question is, once I have identified the model, where can I find the boot file that the installer needs to start the Rockbox install? The pop-up in Rockbox pointed me here, so I guess I'm following a familiar path (!), but I can't see a pinned post about it anywhere.
Would be immensely grateful for a clue.
As your linked page states as to the product, you have a Clip+.
It is relatively easy to install Rockbox, using the Rockbox Utility. Simply follow the instructions (which are up-to-date, as versus in other locations). Note: you do need to read about what you need to do, to know what you need to do.
http://www.rockbox.org/wiki/RockboxUtility
I also first recommend that you first look at the Rockbox manual, for an overview of the install process.
http://download.rockbox.org/daily/manual/rockbox-sansaclipplus/rockbox-buildch2.html#x4-60002
Similar Messages
-
Identifying which clips are used in browser
I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
Premier does this so much better.
Thank you.Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
Thank you,
David -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@
yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I synced the photos to my ipad from my pc which i dont have now. How can i delete them now ?
I synced the photos to my ipad from my pc which i dont have now. How can i delete them now ?
Do you normally sync to a computer? I ended up in the same boat when I'd synced some photos on, then got a new computer and forgot to remove the photos. What I had to do was set up to sync an empty folder on my new computer, which basically erased the old photos, replaced them with the nothing that was in the new folder.
-
I have the latest version IPAD. In Garage Band I am trying to import karaoke songs purchased on itunes so that I can sing with them via garage band. In Garage Band, when I try in import a song from Itunes, nothing comes up? How do I do this...?
Make sure you understand the difference between an Audio File and a GarageBand Project File (also known as GarageBand Song File)
The + sing in the My Songs page is for opening a GarageBand Project File, either a new one or one that is copied vie the iTunes File Sharing mechanism. If I understand you right, then you want to import an Audio File from your iTunes library in a GarageBand Project and not open an existing GarageBand Project.
To import an Audio File from your iTunes Library to an existing GarageBand Project.
Make sure you sync your iTunes Library (all songs or a selection) to your iPad. This is the standard procedure so you can listen to your iTunes Library on your iPad (this step has nothing to do with GarageBand yet)
Once you are in your GarageBand Project, tap the Loop Browser icon (the ribbon) to open the Loop Browser
The misleading part here is that this window can display three tabs, not only the Apple Loops. It also displays any synced audio file via the iTunes Fle Sharing (the tab is labeled "Audio Files) and also any songs that you have synced to yoyr iPad that I just described. This tab is now called "Music".
Look at the screenshot of my previous post. The Music tab provides the same browsing capabilities (Playlists, Artist, etc) as your iTunes.
Navigate to the Kareoke Song (audio file) and drag it onto a GarageBand audio track
I explain all those details and concepts in my GarageBand book
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
My phone was stolen and my icloud is loged in and now my ipad is disabled and now asking for activation and it says there that i have to put my icloud account and i tried loging in my account but it says that it cannot open with that icloud account what do i do????
Welcome to the Apple Community Robin.
Contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan. -
I've been trying to download an update to Photoshop so that I can import a raw file. Half way through it stops and tells me that to continue I have to close dynamiclinkmanager.exe. I have NO other programmes or applications open. None at all. What should I do? And by the way, how do I can't Adobe, instead of asking others (i. e. doing their job for them)?
close that exe using your task manager (win) or activity monitor (mac).
-
I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news -
Is there a way to create my own app store that I can share with employees? I'm thinking apps that we've identified as important or needed, all in one place.
Not exactly your own app store, but close. Apple has an App Store Volume Purchasing Program for Business > http://www.apple.com/business/vpp/
It allows you to purchase apps in any quantity you desire and pay using a company credit card. You will receive a spreadsheet of redeem codes which you distribute to your emloyees. The program guide has complete information > http://images.apple.com/business/docs/VPP_Business_Guide_US.pdf -
can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?
All I can say is that I REALLY like my Touch 4th gen because I have all sorts of capabilities in a small form: e-mail, web browsing, news, weather, books, magazines, etc. etc. Plus lots and lots of apps out there, including so many free ones. I use the Cloud a lot so it's great to have everything sync'd to my MacBookPro (e-mail, Evernote, Pocket, etc.)
It would be easier, though, to do some of this, especially magazines, on the iPad mini, but, again, I love the small size of the Touch.
As for the 5th gen instead of the 4th, the fifth has Siri and the 3D feature in maps, which are great. And I'm sure it's a lot faster in iOS 6 than the 4th gen. And cool colors!
Don't know if this helps . . . -
Creating a template in Pages is straight-forward as answered here previously. Is there an equivalent for iBooks Author which can start with a blank page and build up the template as required? or can one only adapt a ready made template? This has proved unsatisfactory to me so far. Lines are left in etc.
There are two basic menus for fonts - one from the main menu bar and one from the toolbar. You can also bring up the font manage dialog.
I don't recommend trying to hard to force an otherwise foreign font, as it inevitably needs to be usable/supported on iOS as well, and that can get tricky w/3rd party fonts, as an example, even with the expanded font support in the latest iBA.
If you need to discuss fonts more, I suggest starting a new thread....preferably with a slightly more brief title, thanks. -
I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?
Time Machine error: Apple Support Communities
OSStatus 5 when trying to use Lion...: Apple Support Communities -
I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS. While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one. This is a big problem. I must be able to save on the newer computer. Do I need to buy a new computer with a more up-to-date OS? Please help.
Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.
Maybe you are looking for
-
Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
Help require with installing Adobe Acrobat onto my Macbook Pro Retina. I have successfully installed all of my creative cloud apps with the exception being acrobat. I cannot print from Indesign to PDF. I have unistalled, reinstalled and still no Adob
-
How can I know if a used mobile phone is stolen?
Hello everybody! I am about to buy a used Nokia cell phone. The problem is that I want to be sure that the original owner of the phone hasn't stole that product. Simply because I don't want to buy a stolen phone. So, my question is; is there any data
-
Can I copy files from Time Machine to another Mac (or flash drive, etc)?
I hosed my hard drive yesterday (dropped the MBP on a hard floor). Fortunately, I have a TM backup that was done only an hour or so before the accident. It will take me a couple of days to get a new HD and install it, so I'm wondering if it will me
-
Safari Downloads - How do i not save by default?
When I am using Safari as an application (webmail or other) and I select a file or file i want to view, it downloads the file into the doanloads directory before opening. After I view the file, and close it, a copy of that is permanmetly contained in
-
SRV2008R2 SP1: Software Protection Service failed to start. RDP not working
Hi folks, I'm currently working on an issue on a Windows 2008 R2 SP1 Hyper-V Host where RDP from one moment tio the other does not work anymore. After an investigation I found that the Software Protection Service can't be started. The following event