Trying to imp an exp dump from different OS

Im having trouble importing export dump provided to me. Source is Oracle 10G on AIX 64-bit and destination is to Oracle 10G on Redhat Enterprise Linux also 64-bit.
WHen i try to import it i always get this error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
Is the to and from not allowed due to difference in operating system? Does the Endian play a factor or only applies on transportable tablespace?
THanks.

How did you copied the file from source to destination server ?
-- font-end tool that does the exp and zip it.
What is the command you have used to perform the import ?
-- predefined script that does the import using imp command. i tried to imp manually and got the same error
Is the database version of source and target is different ?
-- not exactly sure on the last few numbers. im sure its 10G on AIX 64bit and tried it to import to 10G Redhat 64bit and 11G Fedora 32bit.
do you think it is something related to different type of filesystems? Like AIX to Redhat unable to read it properly?
So it has nothing to do with Endians? right...

Similar Messages

  • Display problem from different domain

    Hi
    I am not able to make my display(DISPLAY variable). When I m exporting the display variable from the same domain as the linux box is present. It is working fine but when I trying to export the DISPLAY variable from different domain and use the GUI. it is throwing error. Please help. Also I am able to ping from my window machine to Sun Solaris
    operating system: sun solaris 9 (5.9).
    Error Message:
    (gnome-calculator:5511): Gtk-WARNING **: cannot open display:
    Can anybody tell me how and what all we need to check to configure DISPLAY.
    I mean the software required and firewall configuration.

    I trying to export the DISPLAY variable from different domain and use the GUI.Different domain or different network?
    I am able to ping from my window machine to Sun SolarisPing means nothing in this case because:
    1. ICMP =! TCP
    2. You need to have allowed connection from Solaris to your local machine (port 6000) and ping is not capable to check that.
    3. You need to check this on/from server (Solaris)
    Or you can use X11Forwarding so you don't need to allow connection as mentioned above.
    I mean the software requiredDo you mean client SW or what?

  • I am trying to edit footage in PE12 from 2 different cameras and the output looks terrible

    I am trying to edit footage in PE12 from 2 different cameras. One is a canon HD video camera taking AVCHD at 1440x1080 at 29fps. I am also using a canon 70D DSLR taking a MOV at 1920x 1080 at 29FPS
    I want to make a 2 camera angle video. When i import both videos into PE12 and edit them together (i am dropping in footage and editing them back to back on video/audio 1) and start rendering, the output video is horrible. there are no straight lines and its blurry. the source video looks great...I am wondering if the difference in size of the 2 videos are messing up the project. is there anything i could do to make the final video look better?
    I am very new at using this program and any information would be helpful...
    thanks in advance,
    jason

    jason
    Both 1440 x 1080 HD anamorphic 16:9 (pixel aspect ratio = 1.33) and 1920 x 1080 16:9 (pixel aspect ratio = 1.0) have the same
    display, that is, 1920 x 1080. Whether you use a project preset for either, the space established by the project preset in the Edit area
    monitor is 1920 x 1080 for editing. So, we achieve the goal of a 1920 x 1080 Edit area monitor space in selecting the project preset cited
    above, that is
    NTSC
    DSLR
    1080p
    DSLR 1080p30
    On the export side of things, it has long been suggested that 1440 x 1080 HD anamorphic content be exported with preset for 1920 x 1080 16:9
    instead of 1440 x 1080 HD anamorphic 16:9 since both give the same display (1920 x 1080) and the choice 1920 x 1080 16:9 avoids the use of
    a format that depends on a 16:9 flag to stretch the 1440 x 1080 for display after encoding. The latter has implications regarding issue of the player and recognition
    of the 16:9 flag.
    So, we should be OK on the import and export choices.
    What about what happens between import and export. You wrote
    I tried this solution and it seemed like it helped at first but when the final project was done, it looked bad again.
    How did the final product look bad....was it the 1440 x 1080 HD anamorphic 16:8, the 1920 x 1080 16:9, or both that presented poorly in the export
    which I am assuming was Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p30?
    Depending on your further details, I have some suggestions for the Timeline content prior to export to file.
    Please review and consider.
    Thanks.
    ATR

  • Can we use impdp to import the data from an normal exp dump?

    Hi All,
    I have a export dump taken from a 9i database. Can i use impdp to import the data into 10g database from that 9i exp dump?
    Please suggest
    thanks and Regards
    Arun

    Hi,
    I have a export dump taken from a 9i database. Can i use impdp to import the data into 10g database from that 9i exp dump?Yes, it can be.
    Refer:
    http://wiki.oracle.com/thread/3734722/can+a+9i+dump+file+be+imported+into+10%3F
    thanks,
    X A H E E R

  • Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Ask on a Windows forum since that's what you're having a problem with.

  • Mobile Me was my default email account, so if I did any emailing like trying to send a photo directly from iphoto it would send from the mobile me address.  Is there a way to set a different default email account now that mobile me is gone?

    We used Mobile Me for our default email.  So if you answered an ad from a site or tried to send a photo directly from iphoto, it would use the mobile me account. Now that its gone, can I set a different address as my default?

    WEll, MobileMe has been moved & still works in iCloud.
    Did you setrup an iCloud account?
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Import dump from a satabase with a different character set

    My database has this character set:
    select * from database_properties:
    NLS_CHARACTERSET     AL32UTF8     Character set
    NLS_NCHAR_CHARACTERSET     AL16UTF16     NCHAR Character set
    I need to import a dump from a database with WE8MSWIN1252 character set.
    After the import I have seet that some character in the table are wrog:
    I see this simbol " " insted of this "à".
    How can I solve the problem?
    The nls_lang variable on my os is: NLS_LANG=ITALIAN_ITALY.AL32UTF8
    I work with oracle 10.0.4 on linux
    Message was edited by:
    user613483

    I have read thos doc on metalink: Note:227332.1
    I also tried to set nls_lang = NLS_LANG=ITALIAN_ITALY.WE8MSWIN1252
    and then I execute the import command.
    BUt didn't work.

  • [POL-3309] trying to use datapage from different file.

    Getting this error trying to access both the ESB and BPEL datasources in SOA Suite 10.1.3 GA.
    Any ideas how to fix?

    I am also getting same error message when I am trying to establish a olite connection. Moreover I got this error when I opened BPEL console :
    Cannot fetch a datasource connection.
    The process domain was unable to establish a connection with the datasource with the connection URL "jdbc/BPELServerDataSourceWorkflow". The exception reported is: [POL-3309] trying to use datapage from different file
    Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
    Please provide solution.....

  • I downloaded a program and it never shiowed up in the download box. I can't find it anywhere on my computer. I tried it a few different times and from different sites but still nothing. What can I try next?

    I downloaded a program several times and from different download sites. It never showed up in the download box but it said all downloads have completed. I searched for it anywhere on my computer but the search produced no results.

    I suppose there is a possibility that you have security software than may be blocking quarantining or even deleting the downloaded file.
    Normally if Firefox says in the download manager that the file is downloaded then it is on your computer, and if you right click you should get the option to open the folder the er the downloaded file is in.
    #Use keyboard keys '''Ctrl + J''' to open Firefox's download manager
    #* or use ( press''' alt''' to display the menubar) Tools -> Downloads
    # in the downloads window find the file entry you are looking for and right click
    # use the option ''open containing folder''
    * see [[downloads window]] <-- clickable link --
    * and [[unable to download or save files]]
    Please post back with how you get on.

  • I export dump from oracle database 8.1.7 and try to import in 10.2.0. while import its prompt error

    I export dump from oracle database 8.1.7 and try to import in 10.2.0. while import its prompt error as follow
    8.1.7
    SQL> select * from nls_database_parameters where parameter like '%SET%';
    PARAMETER                      VALUE
    NLS_CHARACTERSET               US7ASCII
    NLS_NCHAR_CHARACTERSET         US7ASCII
    10.2.0
    SQL> select * from nls_database_parameters where parameter like '%SET%';
    PARAMETER                      VALUE
    NLS_NCHAR_CHARACTERSET         AL16UTF16
    NLS_CHARACTERSET               WE8MSWIN1252
    C:\Documents and Settings\Administrator>imp system/manager file=H:\CGlByte\cglby
    te_03-07-2013Wed.dmp fromuser=system touser=cglbyte ignore=y
    Import: Release 10.2.0.4.0 - Production on Thu Jul 4 16:11:49 2013
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
    tion
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export file created by EXPORT:V08.01.07 via conventional path
    import done in US7ASCII character set and AL16UTF16 NCHAR character set
    import server uses WE8MSWIN1252 character set (possible charset conversion)
    export client uses WE8ISO8859P1 character set (possible charset conversion)
    export server uses US7ASCII NCHAR character set (possible ncharset conversion)
    Import terminated successfully without warnings.
    Pl suggest remedy
    Regards,

    8.1.7
    AMERICAN_AMERICA.WE8ISO8859P1
    10.2.0
    AMERICAN_AMERICA.WE8MSWIN1252
    exp system/manager file=d:\cgl.dmp owner=cgl, even i set character set before export but no impact

  • I lost all of my Itunes music because of an infection that required them to wipe my computer.  I am trying to get the music back from multiple sources.  What I have recovered is a mess. Albums are mixed or songs not grouped as album. Help?

    My computer got infected with some terrible virus.  I contacted the manufacturer and they said the only thing to do was wipe the whole thing. I could not back it up bec this mess?ause it would include the infection. I have been trying to recover the lost music from several different places.  A friend tried to help me by putting all of his music on my computer from his external hard drive. That was very nice of him but now it is a terrible mess. The recovered songs are not grouped into albums correctly.  Some albums are mixed - every other song is from the other album.  Some songs are listed separately and not grouped as an album.  I tried to ask iTunes to find album art work and it has been running that for over 48 hours. Is that possible?  When I try to stop it I get a message that says I will lose all the data.  I admit that I am not very tech. savvy and I really don't know what I am doing.  It took me more than 20 years to make that collection and I am heart broken. Do you have any ideas about how I start to fix

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • I am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Report using Data from different tables

    Hello,
    I am trying to convert a Cobol batch program to Oracle 6i tabular report.
    The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
    I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
    Thank you in advance
    Priya

    Hello,
    There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
    In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
    As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
    Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
    But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
    So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
    In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
    From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
    Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
    Hope this helps.
    Regards,
    The Oracle Reports Team --skw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Dynamic link confusing two separate AE compositions in PPro from different projects

    I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
    I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
    I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
    Any help with ths problem would be appreciated,
    J

    Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
    Date: Mon, 24 Oct 2011 19:47:03 -0600
    From: [email protected]
    To: [email protected]
    Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
        Re: Dynamic link confusing two separate AE compositions in PPro from different projects
        created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
    It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to combine data from different input forms outside a nested iView

    Hi,
    i try to combine data from different input forms in a single one.
    Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
    But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
    Is there any solution?
    Thanx
    Mathias

    Hi Scott,
    i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
    And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
    Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
    In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
    greets
    mathias

Maybe you are looking for