Trying to import from scanner, but only get the wizard and I need the advanced screen....

Hi,
I just installed Adobe Photoshop Elements 10 (I was using Elements 6 before).
I am trying to import a photo from my scanner, but am having some trouble.  I need to import from the "advanced" screen I was using before, but now I am only getting the option to import through the wizard.
In Elements 10, when I click import I only have the option to "Frame From Video", or "WIA Support".  When I pick the WIA Support, it takes me to the wizard.
In Elements 6,  when I click import my scanner was actually listed and that is where I went to the advanced preview/scan screen somehow related to my scanner (it said Epson Scan at the top of the window).
How do I get my scanner to be listed in the import menu so that I can get to the Epson preview/scan window?
Thanks so much for any help you can give me.
Michelle

Oh, I spoke too soon.  I just found out that I had to move the twain file from the optional plug in folder to the regular plug in folder.  Everything is working great now. 

Similar Messages

  • Trying to sync from ipad but keep getting Itunes could not connect to the ipad **** because an invalid responce was recieved from the device"

    The problem only started after resetting the Ipad. can download from itunes, but cannot sync, ie put new books in libary

    Hi LizzardAir,
    Thanks for visiting Apple Support Communities.
    It sounds like there may be a connection issue between your computer and iPad.
    The support article iTunes: Specific update-and-restore error messages and advanced troubleshooting has some steps to try:
    iTunes cannot connect to the [iPad] because an invalid response received from the device
    This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14.
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    1. Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    2. Put a USB 2.0 hub between the device and the computer.
    3. Try a different USB 30-pin dock-connector cable.
    4. Eliminate third-party security software conflicts.
    5. There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    6. Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    7. Try to restore from another known-good computer and network.
    Best,
    -Jeremy

  • Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup

    Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup. How do I ensure I get all my photos etc onto new phone?
    Thanks

    If you're old phone that was repalced was a higher version of iOS, it wont be able to restore. Update your iPhone to the lastest iOS 7.0.4 and try to restore it then.

  • How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad?

    How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?

    Thank you!
    Disabling firewall and AV did the trick!
    Kudos.
    Alex

  • TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    Welcome to the Apple Community.
    Yes, update first, Settings > General > Software Update.
    Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
    When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

  • Im from Spain, but If Im in US and I buy the new Iphone 5, I dont know If later I could use it in Spain?

    Im from Spain, but If Im in US and I buy the new Iphone 5, I dont know If later I could use it normally in Spain?
    There are some problems now? Or forever?
    Thanks

    Currently, the iPhones available in the U.S. are locked to american carriers so they cannot be used with other carriers anywhere else.
    An Unlocked version of the iPhone should be released some time soon, though no actual date has been given yet.
    The Unlocked phone should let you use a sim from any carrier in the phone and have it work.
    However, it is up to the cell carriers in Spain wether or not they have Nano sims for sale to be used with an iPhone 5.  If they do you may be able to purchase an unlocked Phone and use a sim card from a carrier in spain.
    Talk to your carrier first to make sure they have Nano sims available for purchase.

  • I lost my iPhone, but it's been more than 24 hours so iCloud won't let me see the last known location of the device, and i need the map of it's last know location to find the phone, how do i get the map of it's last known location?

    I lost my iPhone, but it's been more than 24 hours so iCloud won't let me see the last known location of the device, and i need the map of it's last know location to find the phone, how do i get the map of it's last known location?

    It's not likely to re-connect to a network lying on the ground somewhere and getting rained on, it would be really great if I could see that map again so I could use it's last known location to find it.  Kind of pointless to have a 24 hr killswitch deadline.  If I had known I would have taken a screen-shot while I still had access to the information.  Since I lost the phone at Canada's Wonderland (which is now closed for the season) I don't have access to the location where I lost the phone (under a roller-coaster probably), and so I wanted to send the Lost And Found people a screen-shot of it's last known location, but I guess I can't do that now.  (Apple are big jerks)

  • HT201272 i have downloaded music from itunes, but only get half songs. I have tried all the troubleshooters HELP!

    I have just downloaded music from itunes but when i play it back i only get half the song.I have tried all the troubleshooters but nothing is working HELP

    If you live in a Region that allows re-downloading Music... Delete the Song and re-download it...
    Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Trying to download icloud control panel - only getting so far.  Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.  Your system has not been modified.  To retry these operations at ltr time, pls run again.

    First time on here... so not sure if doing correctly.
    I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok).  I only get so far - 2 times I've tried it.  Keep getting message:
    The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
    Your system has not been modified. To retry these operations at a later time, please run the installer again.
    huh?

    As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
    Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
    Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
    - Right click on "my computer"
    - Select the "Advanced" tab
    - Click on "Environment Variables"
    Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
    Or you may just go to a DOS Prompt and type the following commands:
    1 - %temp% and hit enter
    2 - %tmp% and hit enter
    to both of these commands you will get a reply such as:
    'c:\temp' is not recognized as an internal or external command, operable program or bath files.
    So by looking at the reply you can see that my temp folder is c:\temp
    The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
    I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
    IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
    Hope it helps.

  • IPhone told me I needed to restore and update, also said the phone did not have an IMEI number. I tried to restore from iTunes but keep getting an error message.

    Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.

    Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
    Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand.

  • Struggling with itunes, will only open after several attempts. When I attach my ipod it starts to sync and shows step 1 of 5 but only gets so far and then stops. I left the ipod connected

    It won't even let me closedown itunes, just freezes and I end up having to switch off my laptop and restart. It's only recently that it started doing this and I've just bought an ipad so I'd like to get the problem sorted as I can't sync that until I do.

    Hi,
    I had a similar problem, all you can do at present to rectify this is to grab your playlist or new created playlist or song from the main library or playlist and drop it into the ipod tab under devices and it will auto sync the changes or songs. Hope this helps.
    There seems to be a problem with the syncing of itunes 11 (mine is 11.0.5) when you just use the normal sync method. the above should work and has worked for me when transfering a playlist straight into the ipod it automatically syncs.
    Regards.
    Nick

  • Trying to download Itunes 11 but am getting a invalid signature which prevents the download

    HI I am having troble downloading the itunes 11 version. It stops right before it finishes and says invalid signature, then it cancels the download. What can I do? I tired going to tools and putting in download only but that had the same result.
    Thanks

    Your profile claims Windows XP, is that correct?
    Minimum system requirements for iTunes 11 is Windows XP Service Pack 2 or later.
    Does your computer meet these system requirements? Are you downloading iTunes directly from Apple?
    Read here > http://support.apple.com/kb/DL1614

  • I have PSE 12 but only Video editor shows up, I need the photo editor

    I bought PSE 12 for a class, but when I opened the program, only Organizer and Video Editor pops up.  The box says "create more amazing photographs", but there is no photo editor

    Thanks for answering!  The disc is titled " adobe  photoshop elements 12" (windows).  In smaller print off to the right side I see it says "Adobe Premier Elements 12 Trial Included".  Did I just install it improperly?  If so, can I delete PSE from my computer & re-load it?  Thanks!
    Sent from my iPhone

  • How to get screen content onto external VGA screen? Do have thunderbolt-VGA adapter but only get screensaver across

    how to get screen content onto external VGA screen? Do have thunderbolt-VGA adapter but only get screensaver across

    VGA and DVI do not carry sound.  Only HDMI.
    Use a minidisplay-to-HDMI adapter.  Then when the TV is connected to the system use "System Prefences > Sound > Output" to select the TV for sound.
    Or connect speakers to the output port of the MBP.

  • HT4489 I am trying to import vcards, they are very simple - a name and contact phone number.  No pic, no ancillary information, but I get an error then directed to this completely unhelpful page.  The vcards are standard exports from another phone.

    I am trying to import vcards, they are very simple - a name and contact phone number.  No pic, no ancillary information, but I get an error then directed to this completely unhelpful page.  The vcards are standard exports from another phone.

    Try creating the vCard with the app My Contacts Backup, email it to yourself, then open it on your phone and tap the attachment to import the contacts.

Maybe you are looking for

  • Socket Permission

    Hello, I am developing a applet (client) that connects to a C server (linux) using sockets. i have tried to grant permissions in java.policy like this: grant{ permission java.security.AllPermission; and this... grant{ permission java.net.SocketPermis

  • Simple sql stetment with 2 SUM  - wrong result :-(

    Hi guys, here's a simple question that drives me crazy. when I do this, SELECT SUM(CSV_net.cur_amount) AS net_Accumulated from csv_net_production as csv_net where ID='5530500' GROUP BY ID  I get: 35188 //this is the right answer. but when I'm doing t

  • BufferedImage size

    Hi, I am developing a swing application which needs to be able to draw thousands of lines on the screen. The line count may well reach 200K although many of the lines are very small. I need the ability to scale the lines as required. Obviously drawin

  • Tcode to create activity group and authorization check,

    hi,   can any one say me the transaction code to create activity group and authorization check.

  • How to start linux box. How i can access its command line prompt

    [root@rxxx ~]# /sbin/shutdown -h now Broadcast message from root (pts/1) (Mon Feb 12 13:18:44 2007): The system is going down for system halt NOW! [root@rxxx ~]#