Trying to import images from sd card as copy to dng and crashes my program LR3.6

Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system. Any suggestions on how to correct this

Sounds like you need to check the permissions of where you are copying or exporting to. Repair permissions as well.

Similar Messages

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

When trying to import images from an external hard drive into Lightroom 5 it states no preview for the files selected

Go easy on me here….
Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
All other images on the external hard drive can be previewed and imported without issue.
I have tried adding the images onto the computers hard drive as well but still no joy.
I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
Any help greatly appreciated.

Go easy on me here….
Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
All other images on the external hard drive can be previewed and imported without issue.
I have tried adding the images onto the computers hard drive as well but still no joy.
I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
Any help greatly appreciated.

Import images from memory card?

My Canon digital camera uses a removable memory card which I then put into an Inca Card Reader. When using Photoshop Elements 11 and try to open the Card Reader to import images, the Card Reader isn't even listed among the various drives attached to, or within, my computer? How can I fix this? I want Photoshop Elements 11 to recognise the Card Reader so I can import the images. My email address is [email protected] With thanks, Mike Pratt (Australia)

Thanks Barbara,
It's Windows 7 Professional. I hope that helps.
Thanks,
Mike Pratt

CS4-Trying to import .mxf from P2 card. Video import works; audio shuts the program down!

Hi guys!
I hope you can help us. My IT guy and I have been working on this for about a week now. Whenever I imported the .mxf video and audio files in CS3 for Windows, I had no issues. We upgraded to CS4 about a week or so ago, and since then, I can't get Premiere Pro to work properly. When I import the .mxf files now, the video files will show up in the media browser and will import. But with no audio. If I attempt to bring the two in separately, the video will import fine, but when I import the audio files, the system shuts down. I don't have the error message in front me at the moment. I'll try to add that to the thread tomorrow.
We've looked at the files in the P2 viewer, and they have audio there. They also have audio under my IT guy's server profile, and they import fine. We've checked sound cards, playback settings, tried converters, etc. Even the .avi files I bring in don't have audio anymore. They do when viewed in a different player but not in PPro.
Could it have something to do with the fact that my software is being pulled from the server and his is installed directly to his hard drive?
I've got to get this solved pretty quickly. My work is starting to pile up, and the busy season is here! (Happy Holidays, everyone!)

Here is the error message I keep getting: [..\..\Src\FileCache\FileCache.cpp-910]
I tried the .wav file; still no audio. And I do have version 4.2.1. I'll see if I can convince them of the network issue. Not sure they'll go for that, but it's about the only thing we have yet to try.
Thanks for your responses!

How do I import images from a Canon scanner on Photo Elements 12 using a Mac

Hi
I have purchase a new Mac with the 10.9 version and I am using Photo Elements 12. I am trying to import images from my CanoScan 9000f scanner but I can't see the scanner in the Organizer, Files, Get Photos and Videos, there is no Scanner option. But I can use my scanner using the Canon Sofware for the scanner. Can you tell me what I have to do to be able to use my scanner directly on adobe Elements 12 ?
Simon

You do not use the 'Import' function under the File Menu to import P2 card content because the video content is still in its native form. For example, my Panasonic HPX 171 produces .MXF video files (amongst all the other files and folders within the overall heirarchy).
In order to access the copied P2 information you have to Log & Transfer it, as if it were a camera plugged into the computer. This process then converts the MXF P2 files into a Quicktime format that the Final Cut application can read and work with.
Take note that when archiving a P2 card as you did it is imperative that ALL the other files and folders are copied and saved. In other words, the entire 'CONTENTS' folder. It is this 'CONTENTS' folder that you navigate to within Log & Transfer when you want to import to FCP.

Can I import images from DVD to my HDD through bridge (I have Win 7

Hi,
I'm using Win 7 (and also have Bridge on Mac OS X). I'd like to import images from DVD to my HDD through Adobe Bridge. But I can't find the option to import from DVD in Bridge (either in Win 7 or Mac). My DVD drive on my Win machine is external while I have the regular internal DVD drive on my Macbook Pro. I'm trying to import images from DVD to HDD through Bridge. Go through the first round of select/reject through Bridge and then take them to LR for further edits.
I currently copy them from DVD drive to a USB pen drive. And then using the Bridge import dialog (when I plug in the USB again) copy them to my HDD. I do this becuase I also need to batch rename my files, add metadata and keywords during import. The simple copy/move function won't allow these additions and so I have to resort to this workaround of DVD to USB to HDD (thru Bridge). If I can import directly from DVD through bridge, it'll save me quite some time.
Look forward to assistance pls.
Thx,
Chinmoy

I feel a bit silly now. For 2 days I struggled and then posted my Q.
After posting the Q, I figured it out in about 15 minutes.
Insert DVD.
Open Br
Navigate to DVD
Select all images
Right Click - Batch Rename
Choose Destination Path and New file name.
And go!
If you've had the same problem I did, hope this helps.

LR4.4 - blacked out boxes when importing images from upgraded PSE10 catalogue [was: Lightroom 4]

I have been using photoshop elements 10 for over a year and decided it was time to upgrade to Lightroom for my photo workflow as I am doing more paid photography work. I purchased and received my boxed full version of Lightroom 4 from B & H photovideo on Friday. I installed it then went on-line and updated it with the download of lightroom 4.4. Then I opened lightroom 4.4 for the first time and went to files and selected upgrade my photoshope elemnts catalog to lightroom. Once that was completed I then tried to import images to lightroom 4 to work with them and all I get are blacked out or greyed out boxes in my slide strip at the bottom of the desktop window in import mode. When I point to each box it shows a file name but will not show the image. I have spent all kinds of time reading and watching tutorials on opening images, importing images and catalogs and I am FRUSTRATED.... Would really like to talk to someone to get this figured out. I never thought it would be this difficult to use this program... HELP Please...

I would like to THANK YOU for your assistance in my situation. I followed your suggestion and went into my monitor settings and did a manual reset to the default profile and went back to Lr and the images started popping up one at a time until all 7000+ were visable. Just for the record, I am using Canon 1Ds Mark II, on a Quadcor AMD unlocked FX processor running Windows 7. I shoot in RAW and convert to JPG. It would have been the last thing for me to look at on my monitor settings as all the other programs on my computer run without a glitch. Thanks again for your help... Cheers!

I cannot import images from EXT HD

UNtil yesterday, everything was fine. I am on a Mac. Running iOS 10.9.5 and LR version 5.5 (CR 8.5)
I have imported images from my card into Aperture and these images are stored on an external HD. I then bring the ones I wish to edot into LR
When I try to bring them inot lr, the import process seems to go as always, but upon completion, i get a message saying 'some files cannot be written'. No Error code. Basically all files are not being written. The images are in Aperture. I can see and edit them there, but I cannot bring them from there into Lightroom as I have always done. I havemnt done anything to change my set up. SOmething has happened and I dont know what it is or what to do about it.
I upgraded from LR4 online, so I no longer have a physical cd of the software.
I would be very grateful for any help anyone can give me. Thank you

I mean the directory specified in the Lightroom Import dialog box, near the top right, it says "Destination". Has that directory been accidentally changed to someplace different than it was before when things were working properly?
I can't tell you how to change permissions, as I am not a Mac person, but I think that Google thing might be able to find the answer.

Trying to import videos from my sony handycam imovie connects but nothing happens

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good.

I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!

If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader.

Importing images from an SD card to Lightroom 3.6

I am a newbie to Lightroom and am having trouble importing images from an SD card. Can somebody run through the import procedure step by step for me please??

Hank,
http://tv.adobe.com/show/getting-started-with-adobe-photoshop-lightroom-3/
Hal

Deleting images from CF-card when imported

Hi.
Have any of you been able to find a feature that deletes the imported images from the CF-card, so you don't have to manually delete images them from the CF-card.
Regards, Matias V

There isn't at tis point. Consensus view it that it's best to delete/format in camera.

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

We are using iPhoto '09 trying to import photos from a memory card. We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing. Any idea how long the import should run if there were 5000 photos on the card?

We are using iPhoto '09 trying to import photos from a memory card. We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing. Any idea how long the import should run if there were 5000 photos on the card?

Don't know how long it would take to import that many photos but if you stopped import and ejected the card ther is something else wrong here.
I would Force Quit iPhoto. Then Restart your mac. Then restart iphoto to see if any or all of your photos were imported. If they ae you're good to go. If they were not imported I would try importing fewer photos at a time and see what happens.

Trying to import images from sd card as copy to dng and crashes my program LR3.6

Similar Messages

Maybe you are looking for