Trying to instal Service Pack 2 under WLS 6.0
Below you can find my original message posted five days ago.
Just as comment: I don't have a beta version. It is <release level="6.0" Status="installed".
Any help?
Thanks
Sergio Ríos
PS: please don't erase !!!
Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens: ===============================================================================
Choose BEA Home Directory -------------------------
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found -----------------------------
WebLogic Server Service Pack 2 Installation failed. You do not seem to have WebLogic
Server 6.0 installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance Sergio Ríos
Hi.
You can get individual service packs by logging into your esupport
account at http://support.bea.com. Alternatively you can download
WLS6.0 with service pack 2 from
http://commerce.bea.com/downloads/weblogic_server.jsp.
Regards,
Michael
Alexandre Portella wrote:
Hi,
From where can I download the sp2 for WLS 6.0 on Solaris?--
Michael Young
Developer Relations Engineer
BEA Support
Similar Messages
-
Trying to install Service Pack 1 from updates
I decided to restore my home computer to the Factory Setting Configurtion. Now when I try to install the Vista Service Pack 1,
it dose not install but it says it did install correctly after it was down loaded. My history says it installed 5 times now but
it has not. I am trying to update Internet Explorer 7 to 9 or higher but I can't get past installing Service Pack 1 which will
not install.I try installing service pack 2 which will not install becauce service pack 1 is not installed. This is a brand new
installation of Vista Home Pre. from Factory Settings Disk 2007. I have install all updates I can install. Then I also look at
Windows updates in my computer and it is not there, thow it shows in History Updates.Please Help MCSE Richard Sedore
Thank You.For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.
-
Trying to install service pack 2 for WLS 6.0
Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens:
===============================================================================
Choose BEA Home Directory
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found
WebLogic Server Service Pack 2 Installation failed.
You do not seem to have WebLogic Server 6.0
installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance
Sergio RíosDaryl,
That is really strange...i just tried downloading from the same link and it is working fine for me.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
-Anil -
T-500 running Windows Vista - Error trying to install Service Pack 2
I just spent my entire Saturday trying unsuccessfully to install SP2 for Windows Vista on my T-500. My laptop has Vista Home Premium as the OS and is fully patched with SP1.
The message I get is "Error_not_found (0x80070490)" when I try to install SP2
I ran SFC /Scannow and got a message that there are corrupt components and a direction to C:\Windows\Logs\CBS that has a huge file I cannot comprehend.
I also ran the "System Update Readiness Tool" prior to trying to install SP2 with no apparent effect.
I have tried various approaches to this such as running System Restore and reapplying everything with reboots in-between.
I confirmed no spyware and also disabled my antivirus program (NOD) during updates with no effect.
Has anyone else out there had a similar problem who might be able to offer advice?
Thanks,
The HoyAre you sure you have the proper file downloaded for your system? x86 if you are running 32bit Vista and x64 if 64bit.
Other than that, you might try to use Windows Update. Note that you need to install all updates, possibly including IE8 before Windows Update will offer you SP2.
You might also try installing all updates from Windows Update and then running your stand alone SP2 installer, to see if that solves the problem. -
Errors when trying to install Service Pack 3 for Exchange 2010
I have 2 Exchange 2010 servers that are running SP2 and I am trying to install SP3 on both.
They are installed in a DAG and so I am running the .\StartDAGserverMaintenance.ps1 script before attempting to install SP3. When attempting to run the SP3 setup I get the following errors:
Setup cannot continue with the upgrade because the 'powershell' (Machine: P-E10-2.company.com) process (ID: 5296) has open files. Close the process and restart Setup.
AND
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
I can download the hotfix and apply it but has anyone had any issues with this particular hotfix? Does anyone have any ideas about the powershell error?
thanks for your help.Hi,
That hotfix relates to a known issue implementing DAG's across data centres (an issue particularly with Windows failover clustering). As a best practice is should always be installed. Please review the following article, which describes why it should be
installed:
http://blogs.technet.com/b/exchange/archive/2011/11/20/recommended-windows-hotfix-for-database-availability-groups-running-windows-server-2008-r2.aspx
In regards to the open files, as the other poster suggested, there will be another user logged onto the server who has a powershell window open. Ensure all other users are logged off the server before performing the upgrade.
Best Regards -
Crystal Reports 2008 Error Installing Service Pack 1
Hello,
I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration . I don't know if this problem might be causing the Service Pack 1 to not install.
Thanks,
MicheleHi Michele,
Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Then it should work.
Thank you
Don -
Problem installing Service pack 1 for Windows Vista 32-bit from windows update
I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.
Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul -
Install service pack 2 in sharepoint medium form
Hi
i have a sharepoint medium form in production environment and i want to apply service pack 2
form has :
2 Application servers
2 Web front end servers
2 Index servers
1 Database server
Servers
Operating System
Configuration Database version
Services Running (check the attached file for details services running in all server)
1 Application Server
Windows server 2008 R2 Enterprise , Service pack 1
14.0.6029.1000
Central administration Service running in this server Only
For other services check the attached file
2<sup>nd</sup> Application Server
Windows server 2008 R2 Enterprise , Service pack 1
In two Web front end servers
Windows server 2008 R2 Enterprise , Service pack 1
Web applications deployed in these servers (these are load balanced servers)
Microsoft SharePoint Foundation Web Application running
Search service is running in these server
In two Index servers
Windows server 2008 R2 Enterprise , Service pack 1
Search service is running in these server
Database server
Windows server 2010 Data center
I want to take advise for from which server I will start install service pack 2
Or before applying service pack 2, Is I need to upgrade operating system if I update can I face any problems ?
adilLeaving function Command.this[string key]
03/27/2014 00:13:12 14 INF Leaving function Farm.TryIsJoinedToFarm
03/27/2014 00:13:12 14 INF Leaving function Farm.IsJoinedToFarm
03/27/2014 00:13:12 14 INF The parameter upgradesessionid is chosen, so returning the value as c81cccd6-5e02-4a35-b627-923fb6da03e9
03/27/2014 00:13:12 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Setting the upgrade mode to inplace
03/27/2014 00:13:12 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Creating security token service application for this farm ...
03/27/2014 00:13:12 14 INF Successfully created security token service application
03/27/2014 00:13:12 14 INF Creating service connection point for this farm ...
03/27/2014 00:13:13 14 WRN Failed to add the service connection point for this farm
03/27/2014 00:13:13 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 INF Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
03/27/2014 00:13:13 14 INF Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection
Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
03/27/2014 00:13:13 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container
exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=test,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
03/27/2014 00:13:15 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Spawing off the upgrade job
03/27/2014 00:13:15 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.TryToStartService
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.Start
03/27/2014 00:13:15 14 INF Trying to start service SPAdminV4 and waiting 180 sec to do so
03/27/2014 00:13:15 14 INF service SPAdminV4 is Stopped, will try to start it
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:44 14 ERR An exception was encountered when trying to start service SPAdminV4
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language
English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type
{0} was thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception
information: Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
03/27/2014 00:13:44 14 INF Leaving function ServiceHelper.Start
03/27/2014 00:13:44 14 ERR Failed to start the SPAdminV4 service.
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
03/27/2014 00:13:44 14 ERR Task upgrade has failed with an unknown exception
03/27/2014 00:13:44 14 ERR Exception: System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception:
The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function get CommandCollec
adil -
Volume Keys not responding after installing service pack 1.
Okay, I've scoured the internet, and I can't find anyone else with a similar problem or a way to fix it, hopefully ya'll will have an answer:
I recently just updated my Vista Ultimate Operating System (using Bootcamp) to service pack 1. Prior to installing service pack 1, when I pressed F3-F5 on the keyboard, they would respond in the same manner that they would on OS X where F3 would mute, F4 would make the sound lower, and F5 would increase the sound.
However, after Service Pack 1, the buttons do nothing more than mute and turn on the sound. I reinstalled the Boot Camp drivers, ran all the software updates (found no updates on both apple and windows), and tried to repair Vista from the original install disk. Nothing helped.
However, here's the thing: When I press the buttons the same little overlay comes up displaying the sound volume, but there's a big 'denied' circle on the bottom of it. To describe it slightly better, there's a circle with the line through it(looks like a no smoking sign), placed over the squares representing the volume on the overlay to show volume control.
I'm lost as to what to do since all the other keys work, including the brightness control, and they worked before I installed Service Pack 1. Has anyone else had this problem or know how to fix it?i just uninstalled SP1 and it went back to normal,
go to Control Panel and on the left side theres something called "view installed updates" go there and just uninstall SP1 and your fine. but if you need sp1, i don't know how to help you there. -
Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked. -
Problem installing service pack 3 update
I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F. -
How can I open a picture file in PS Elements after installing service pack 2?
Since I installed service pack 2 on my HP computer a week or two ago, the Photoshop "Open" tab no longer appears at the top of my Pictures screen, but rather a "Preview" tab, and I haven't been able to open a picture in Photoshop. Instead, when I double click on a picture, it opens in Windows Picture Gallery. Not long after I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it. Thanks...
Reinstall PSE or manualyl adjust your file associations.
Mylenium -
Error after install Service Pack 4
Put weblogic510sp4boot.jar as the first package in your JAVA_CLASSPATH
and
Put weblogic510sp4.jar as the first package in your WEBLOGIC_CLASSPATH
Cheers - Wei
Min Zheng <[email protected]> wrote in message
news:[email protected]...
Hello,
I have following errors when I start WL:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
This erros happend only after I installed Service Pack 4, and change the
weblogic.class.path.
Thanks, -
Labview won't close down properly after installing Service Pack 2
Hi,
We installed Service Pack 2 for Windows XP recently and ever since, I've had trouble closing down Labview. I'm using Labview 6.1 and whenever I try to close it down, it won't fully close down and I have to use Task Manager to shut it down.
What happens is that I get a minimised window on the bottom of the screen that won't go away.
Has anybody seen this before and can anybody help.
Thanks,
Kennethtbob wrote:
In my experience, SP2 for XP introduced a whole lot of bugs and mishaps. You would be better off uninstalling SP2 if you can. If you want to keep SP2, you may have to uninstall Labview, then re-install it.
I personally can't confirm this statement. I have XP SP2 with the latest patches applied and I have not really problems with LabVIEW 6.0, 6.1, 7.0, and 7.1. Only NI-Max likes to crash sometimes but since it is a notebook I have little reason to run NI-Max until now.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Hi All,
I have the following question about installing service pack 1 for 2008 R2.
I know that it is recommended by Microsoft to ensure the stability of the system etc.
My question is it less secure to only install security patches and no service packs? (is it ok to have a 2008 R2 machine with all security
patches but without SP1?)
Or is it ok if we install all security patches?
I have run baseline analyser and it lists sp1 as a security update..
Is it only because there are also security patches included or also because it is required for future security updates?
ThanksA service pack contains previous updates and new functionality combined and thus contains security fixes too. The release of the service pack extends the support lifetime for the product, as long as you obviously have installed the service pack.
Support ends 24 months after the next service pack releases or at the end of the product's support lifecycle
This means 2008 R2 (without service pack)
support has ended somewhere in 2013. Since, no security patches are made for that OS version.
You should really install the service pack, even if you have very good reasons not to.
MCP/MCSA/MCTS/MCITP
Maybe you are looking for
-
Processing Started in JDBC communication Channel?
Dear Friends, in JDBC Sender Channel i am facing one issue, i.e the data coming from DB but in PI/PO 7.4 data is not reached and channel is showing Green color and log is showing processing started. But as per my experience may the data is locked in
-
Help - unable to remove ipad from icloud device list
I am trying to erase/remove my IOS7 ipad mini from my iCloud account, as I am selling the device. I have been able to use the iCloud - Find my iPhone function to sucessfully erase the ipad mini. I did this using the browser interface to www.icloud.co
-
Keynote 09 Magic Move has a HUGE lag in slideshow mode
I LOVE magic move. My slides were amazing! Then the upgrade happened. And now magic move has a HUGE delay, sometimes even freezes the slideshow for 30 seconds at a time. Has anyone else experienced this? Has anyone figured out how to fix this?
-
I get 120 hours render time on quicktime h.264 usualy setting
My Computer : Processor : Radeon HD graphics APU A10-5745M 2.10GHz Ram installed : 16 Go ( 15.52 usable , 12go on AAE CC ) Graphic cards : R7 m260 and HD 8610G My project : 10 min long , 3 audio spectrum with glow and a '' bass shake fx on all of th
-
Where is my Library folder?
I know there is a way to display the Library folder in my home folder, but I can't find it. Can anyone help please?