Trying to install 11gr2 on my CentOS server and need help

Can any one please point me to a good documentation to install Oracle 11g R2 on a centOS ser 64 bit.

user11237193 wrote:
Can any one please point me to a good documentation to install Oracle 11g R2 on a centOS ser 64 bit.Oracle is not certified on CentOS. Why not use a linux that it IS certified on?

Similar Messages

TS1394 im getting an error message when trying to install the snow leopard application cd 2. need help.

im getting an error message when trying to install the application cd on my Imac os x 10.6.4 what can I do to solve this problem?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HELP !!!!!!! i new to OS X Server and need help setting up WINS (in DHCP)

i Need help on how to setup the WINS part of DHCP
can any one help ?
what should my settings be for ?
WINS/NBNS PRIMARY SERVER:
WINS/NBNS SECONDARY SERVER:
NBDD SERVER:
NBT NODE TYPE:
netBIOS SCOPE ID:
i have DNS, SMB, AFP, Open Directory all setup
just dont get WINS
kinda old school isnt it ?
so if some one could help i would be thankful \
Jono.

thanks sorry for the "noob" question,
i am having one problem with windows computers not showing up in finder & on the windows computer the OS X Server wont show up when you go to map a driver. or in vista the "networking" place. but you can type in the IP address of the server and it will find it.
all the computers are getting DNS and DHCP from the server but i cant figure out what happening.
there only one server and its OS X leopard 10.5.6
is this because WINS ? or some thing else
and sorry for asking i don't really like asking.
but thanks for the help. ir im being to much of a "noob" just dont reply haha
Jono.

Moved to new server and needing help with feed

My website www.gothamknightsonline.com has been moved to a new server and I am needing to keep the feed updated with new and old podcasts. I have reposted some of the old episodes as well as a new one I just posted. I have not been able to get the feed to show up. When I view our podcasts itunes page all of the info on each individual podcast is now gone with just the episodes listed and no more information.
Here is the feed URL: http://gothamknightsonline.com/category/podcast/feed/ (I have verified the feed) but I am not certain if this is the same feed URL that was listed before. Either way the plugin i used for my podcasts in wordpress has this in the feed as well as our iTunes id and URL ( http://itunes.apple.com/us/podcast/batman-gotham-knights-online/id315370686)
I am doing all of this on a Wordpress blog using the podpress plugin.
Any help would be appreciated. Thank you
-Garrey

iTunes is looking for a feed at http://www.gothamknightsonline.com/feed/?cat=10 and not finding it - checking this I don't get 'file not found' but if there is a file there it contains no data whatever.
I assume this is your original feed URL. The method for redirecting iTunes to another feed URL involves placing a special tag in the original feed, and is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Your new feed contains this tag (effectively redirecting to itself); you need to place a copy of the feed, with the redirect tag, at the original URL and leave it there for a couple of weeks. If you are unable to do this the two alternatives are described in my article.

I am new to OWC , installed all the required software's and trying to install OWC sites in weblogic server and in the middle of the installation it is creating all the required tables and throwing below exception

[2013-06-12 21:52:15,554 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=xceleditor&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=63&PASSWORD=<user password>&
[2013-06-12 21:52:15,566 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=xceladmin&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=127&PASSWORD=<user password>&
[2013-06-12 21:52:15,578 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=xcelpublish&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=63&PASSWORD=<user password>&
[2013-06-12 21:52:15,590 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=Visitor&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=63&PASSWORD=<user password>&
[2013-06-12 21:52:15,602 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=VisitorAdmin&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=127&PASSWORD=<user password>&
[2013-06-12 21:52:15,614 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=RemoteClient&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=127&PASSWORD=<user password>&
[2013-06-12 21:52:15,627 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=WSUser&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=1&PASSWORD=<user password>&
[2013-06-12 21:52:15,639 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=WSEditor&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=63&PASSWORD=<user password>&
[2013-06-12 21:52:15,652 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=WSAdmin&command=addacl&COMMANDNAME=READURL&USERNAME=ContentServer&permission=127&PASSWORD=<user password>&
[2013-06-12 21:52:15,663 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.EventManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'CSEvents'
[2013-06-12 21:52:15,664 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xml] Installation Error in Basic/Install: errno -22 from EVENTMANAGER.INSTALL: Error: com.openmarket.xcelerate.commands.EventManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'CSEvents'
[2013-06-12 21:52:15,666 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/Basic/Install?editacl=xceleditor&adminacl=xceladmin&COMMANDNAME=READURL&upgrade-log=C:/owcSites/oracle/webcenter/sites/logs/sites.log&USERNAME=ContentServer&upgradefrom=0.0.0.0.0&PASSWORD=<user password>&
[2013-06-12 21:52:15,681 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.ObjectPublishManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'ObjectPublish'
[2013-06-12 21:52:15,682 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.DistributionListDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'DistributionList'
[2013-06-12 21:52:15,682 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.ApprovedAssetsDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'ApprovedAssets'
[2013-06-12 21:52:15,683 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.AssetExportTargetManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetExportData'
[2013-06-12 21:52:15,684 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.AssetDefaultTemplateManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetDefaultTemplate'
[2013-06-12 21:52:15,684 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.AssetPublishListDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetPublishList'
[2013-06-12 21:52:15,685 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.framework] error: errno -22 on attempt to create table
[2013-06-12 21:52:15,686 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.SessionTableDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'PubSession'
[2013-06-12 21:52:15,687 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.PubTargetManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'PubTarget'
[2013-06-12 21:52:15,688 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.framework] error: errno -22 on attempt to create table
[2013-06-12 21:52:15,698 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xcelerate] Error: com.openmarket.xcelerate.commands.EmbeddedReferenceTableDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'EmbeddedReference'
[2013-06-12 21:52:15,699 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.xml] Xcelerate Installation Error in Publish/Install: errno -22 from APPROVEDASSETS.INSTALL: Error: com.openmarket.xcelerate.commands.ApprovedAssetsDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'ApprovedAssets' errno -22 from ASSETTARGETMANAGER.INSTALL: Error: com.openmarket.xcelerate.commands.AssetExportTargetManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetExportData' errno -22 from ASSETTEMPLATEMANAGER.INSTALL: Error: com.openmarket.xcelerate.commands.AssetDefaultTemplateManagerDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetDefaultTemplate' errno -22 from ASSETPUBLISHLIST.INSTALL: Error: com.openmarket.xcelerate.commands.AssetPublishListDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetPublishList' errno -22 from DELIVERYTYPE.INSTALL: Error: com.openmarket.xcelerate.commands.AssetPublishListDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'AssetPublishList' errno -22 from SESSIONMANAGER.INSTALL: Error: com.openmarket.xcelerate.commands.SessionTableDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'PubSession' errno -22 from PUBTARGETMANAGER.INSTALL errno -22 from PUBCONTEXT.INSTALL errno -22 from EMBEDDEDREFERENCETABLE.INSTALL: Error: com.openmarket.xcelerate.commands.EmbeddedReferenceTableDispatcher: Install: com.openmarket.basic.interfaces.AssetException: Error: errno=-22 on call to catalog manager for table 'EmbeddedReference'
[2013-06-12 21:52:15,699 IST] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURLProblem in CallElement. Error number=-22
Can some one help me in identifying the issue.

Hello,
errno -22 means " Table already exists."
This could occur if:
- The install had failed before during the 2nd stage (i.e. some tables were created previously) and you did not drop the schema before re-install.
- The database user you are using has access to more than 1 WCS schemas and thought the tables exist already.
Suggestions:
1. Make sure the db user is set up as per the Configuring Supporting Software document ( http://docs.oracle.com/cd/E29495_01/doc.1111/webcenter_sites_11gr1_bp1_configuring_supporting_software.pdf )
2. If the second stage of the install fails, you must drop the database tables, undeploy the WebCenter Sites application, delete the WebCenter Sites file structure, and re-install WebCenter Sites. ( http://docs.oracle.com/cd/E29495_01/doc.1111/webcenter_sites_11gr1_bp1_install_on_weblogic.pdf )
Regards,
Yu-Chun

I am trying to install FF on a thin client, and need to change the location the installler extracts the temp files to as the disk is not big enough.

Is there a pre extracted version of the installer or a way of specifiying where the installer extracts itself to?

If Firefox on Windows is using the current temp folder then you need to change the location of the temp folder via the %TMP% and %TEMP% environment variables.
*Control Panel > System > Advanced > Environment variables
*Right-click My Computer > Properties > Advanced > Environment variables

Just Bought New Mac Mini Server and Need Help on Migrating Old Single User

This is for my home / home office The issue is I was unable to connect to my old computer using migration assistant for some reason, but I didn't want to go down a rabbit hole to figure it out.
I would like to transfer all of my applications and prefs / settings to the new machine and I was thinking about using a synching program to do it so I wouldn't mess with the SL Server settings. I suppose I could do this manually but am concerned some hidden files or settings may not get moved properly. I am able to mount my old hard drive on the new mini so I just need a strategy. Thanks.

Good question - my angst is subsiding as I type. I was concerned that my preferences and other application linked things like Application Support were the same as it was, but I suppose if I have to mess a bit with it upon opening or reinstalling a program is the worst thing that will happen. After going thru the list of programs I realize that like most people I regularly use about 15% of the things in my Applications folder. The biggest hassle is Adobe CS4 which I need to get reauthorized by Adobe and this could only have been solved if I de-authorized it before blowing out my earlier computer. Luckily that is worst issue I am encountering.

I am trying to install Oracle 9i on Windows Server 2008

Hi
I am trying to install Oracle 9i on Windows Server 2008.
While installing third CD it shows the following error message
"jrew.exe has stopped working"
Please guide me what to do next as early as possible.
Thanks

Why?
The general policy of Oracle is very simple:
it certifies against the current version of the OS.
It never re-certifies against new releases of the OS.
Windows 2008 didn't exist when Oracle 9i was released.
Sybrand Bakker
Senior Oracle DBA

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.

Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?

If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there.

I tried to install the latest version of Itunes and now I cannot open it because I receive a message that says this version is corrupt It says to reinstall and I have no idea what to do Any help is appreciated

I tried to install the latest vversion of Itunes and now I cannot open it because it says this version is corrupt and I should reinstall it. I have no idea what to do. Any help will be appreciated. Thanks

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

I have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5 or Later
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Trying to install the latest version of iTunes and when it is being installed I get the message "There is a problem with this installer package. A program quired for this install could not be run. Contact your support personel or package vendor."

I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Trying to install 11gr2 on my CentOS server and need help

Similar Messages

Maybe you are looking for