Trying to install 64 bit premier elements on win7 64 bit. never works

trying to install 64 bit premier elements on win7 64 bit. never works

What errors are you getting? Have you downloaded the software or installing via disc.
In case of a disc, the disc 2 is meant for Windows 7 64 bit.
Please refer : http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html

Similar Messages

  • I AM TRYING TO INSTAL THE ADOBE PHOTOSHOP ELEMENT 10, BUT IT COMES A NOTE SAYING TO GET THE ADOBE SUPPORT ADVISOR, I TRIED THEY SAY IT HAS BEEN DISCONTINUED, I BOUGHT THE LICENSE AND A NEW APPLE COMPUTER AND NEED TO INSTAL IT,

    I AM TRYING TO INSTAL THE ADOBE PHOTOSHOP ELEMENT 10, IN A NEW APPLE COMPUTER, BUT IT COMES A NOTE SAYING THAT THE INSTALATION WAS NOT ABLE TO INITIALIZE, AND THAT  I SHOULD DOWNLOAD THE ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM.  I DID IT BUT IT SAYS THAT IS HAS BEEN DISCONTINUED,

    start at the top and work your way down applying applicable fixes until your problem is resolved.
    if cc (win):  https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
    if, your error is:
    "Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
    first, rename OOBE Folder to OOBE.old.
    to find OOBE:
    64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
    32 bit win OS: Program Files \Common Files\Adobe\OOBE
    mac os: HD>library>application support>adobe>caps
    mac os: USER>library>application support>adobe>OOB
    if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
    if you're using a dvd to install:
    copy the disc contents to a desktop directory and install from that directory.
    if you're using a mac:
    1. Try to Create a new user account in Mac with Administrator Priviledges.
    2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
    3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
    4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
    5. Start the installation again.
    if everything applicable above fails, check your installation logs:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

  • Installed new Premier Elements 12 and dymamiclinkmanager has stopped working

    The Sw does not start at all I get several error messages:
    Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    dynamiclinkmanager.exe
      Application Version:    6.0.0.0
      Application Timestamp:    523cc6d3
      Fault Module Name:    MSVCR100.dll
      Fault Module Version:    10.0.40219.1
      Fault Module Timestamp:    4d5f0c22
      Exception Code:    40000015
      Exception Offset:    0008d6fd
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    and after those a Message:
    Adobe Premier Elements 12 has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Adobe Premiere Elements.exe
      Application Version:    12.0.0.0
      Application Timestamp:    523cd4d5
      Fault Module Name:    dvamarshal.dll
      Fault Module Version:    11.0.0.0
      Fault Module Timestamp:    523cc62d
      Exception Code:    c0000005
      Exception Offset:    0000000000034961
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    So did I purchase piece of crap, or what should I do to get the SW working?
    Br
    -H

    First, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
    That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
    What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
    How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project?

  • Iam trying burn a slide show (Premier Elements) 10. It says no burner detected. I have had my burner checked and it's ok. Please help me, thank you.

    I am trying burn a slide show (Premier Elements) 10. It says no burner detected. I have had my burner checked and it's ok. Please help me, thank you.

    This is the Photoshop forum. Try
    Premiere Elements
    Regards,
    Ronald

  • I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.  I get the message "Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already

    I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
    I get the message “Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already exists on this disk”
    If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
    I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
    How can I solve this problem

    Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

  • Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    Hi I have got a iPad1 and tried to update to version 5.0.1 many times but never work.please help me.

    alway say it was corrupted
    Restore the iPad as a new device....
    How to set up your iPhone, iPad, or iPod touch as a new device

  • Log in Screen hangs while trying to install upgrade download of elements 13

    I downloaded the update of Premier elements 13, tried to run the install.  I  first get a message that says my machine needs to be restarted and I'm given the option to quit or ignore.  I restarted multiple times and still get that message.  I click ignore and the initialization process starts and everything looks fine.  I get the Sign in required, click sign in, put in my username and password then thats where it hangs.  Little boxes just go round and round and no connection.  And.. yes, I do have a connection   Thanks for your help!
    I have windows 7.  See the below screen shots. Thanks!

    janmendoza
    Premiere Elements 13 on Windows 7 64 bit.
    From where are you downloading Premiere Elements 13 (as purchased or tryout)?
    Please give the following a look with regard to what worked for me with version 12.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    Please let us know the outcome. If none of the above resolves the matter, we might look at download
    of Premiere Elements 13 from another source. More on that later.
    ATR

  • Error Message when trying to open prodect in Premier Elements 10

    I created a slideshow on Premier Elements 10, and saved it.  When I try to open the project I get an error message
    "This type of file is not supported, or the required codec is not installed"  Help please.

    What steps are you taking to open it? It sounds like you may be trying to import the project file into your project.
    To open a .prel file, go to the File menu and select Open.
    Also, when creating a slideshow, be sure to downsize your photos to no larger than 1000x750 pixels in size, as I say in my books! This will save you a lot of struggles later.

  • USB Errors while trying to install 64 bit Arch

    I'm trying to install Arch onto some brand new hardware. I am installing using the Arch Netboot environment.
    When I try to install 64 bit Arch, I get the following errors straight after archiso.img is downloaded and the kernel is booted:
    usb 2-5: device descriptor read/64, error -32
    usb 2-5: device descriptor read/64, error -32
    usb 2-5: device descriptor read/64, error -32
    usb 2-5: device descriptor read/64, error -32
    usb 2-5: device not accepting address 4, error -32
    usb 2-5: device not accepting address 5, error -32
    hub 2-0:1.0: unable to enumerate USB device on port 5
    The same lines appear for usb 4-1, 6-5 and 7-1. The only USB device that is plugged in is the USB key that I booted ipxe.lkrn from.
    Googling seems to point to a kernel module that needs to be loaded earlier or a faulty USB controller. I do not know how to change what kernel modules are used during installation, and I'm fairly certain the USB controllers are fine. Its a brand new motherboard and I can access my USB key fine (I can boot from it) in any of the available USB ports.
    I was close to giving up until for some reason I decided to try and install the 32 bit version of Arch instead. This worked as expected and I am sent to the archiso installation prompt without seeing any of the same USB errors.
    Can someone please assist me with this? I would really prefer to have the 64 bit version installed.

    https://bbs.archlinux.org/viewtopic.php?id=158206
    This seems to be related, although my errors are giving error -32 instead of -110.
    Is there a way I can force the installation environment to use kernel 3.7.6? Does the 32 bit installer use a different kernel to the 64 bit installer?
    Is there a way I can use the 32 bit installation environment to install 64 bit as well as the 3.7.6 kernel?

  • [SOLVED] Pacman trying to install 64-bit packages on 32-bit system

    I was upgrading my Arch Linux i686 install, and I got the following error:
    error: The mirror 'http://mirror.rit.edu/archlinux/$repo/os/$arch' contains the $arch variable, but no Architecture is defined.
    I added Architecture = i686 to /etc/pacman.conf under [options], and when I run pacman -Syu, I get these errors:
    error: failed to prepare transaction (package architecture is not valid)
    :: package clucene-2.3.3.4-2-x86_64 does not have a valid architecture
    :: package filezilla-3.5.3-1-x86_64 does not have a valid architecture
    :: package lshw-B.02.16-1-x86_64 does not have a valid architecture
    :: package yajl-2.0.4-1-x86_64 does not have a valid architecture
    Why is pacman trying to install x86_64 packages on my i686 system?
    Last edited by nticompass (2012-01-13 03:24:43)

    Got errors
    :: Retrieving packages from community...
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirrors.kernel.org : File unavailable (e.g., file not found, no access)
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from cake.lib.fit.edu : File unavailable (e.g., file not found, no access)
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirrors.cat.pdx.edu : Not Found
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirror.ece.vt.edu : Not Found
    error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
    warning: failed to retrieve some files from community
    error: failed to commit transaction (File unavailable (e.g., file not found, no access))
    Seems to be looking for 64 bit packages still. Had a similar issue when installing another prog as well

  • Trying to download photoshop and premier elements [was:download]

    windows cannot open file with z extension.  trying to download photoshop and premier elements

    EMK wrote:
    i have downloades photoshop cc.
    Why? That is the Cloud version of Photoshop - nothing to do with Elements 12. There is no serial number for Photoshop CC.
    Please confirm: are you trying to download Photoshop Elements 12? or Photoshop CC?

  • Installing Photoshop and Premier Elements 12

    I just purchased the CD-ROM for Photoshop and Premier Elements 12. I already have Elements 8 installed. Question do I do an uninstall of 8 and than do a fresh install of 12?
    If I do the uninstall are there any remnants of files that might not uninstall when going to control panel and uninstall and if so where might they reside?
    Thanks

    you can deactivate (help>deactivate) and uninstall pse 8 if you no longer need it and you can do that before or after you install pse 12.  or you can leave it installed and use both versions.

  • How can I open Premier Elements 11 Organizer when it Stops Working before it opens up?

    I have brand new Premiere Elements 11 Software but cannot get the Organizer to start up.  It trys to open then shows an error message saying Elements 11 Organizer has stopped working.Thanks.

    Richardbeds
    1.On what computer operating system is your Premiere Elements 11 running? And, just to get it out of the way, do you have the latest version of QuickTime installed, and are you running Premiere Elements 11 from a User Account with Administrative Privileges?
    1. Delete the settings (preferences) file which is name .psa.prf. Assuming Windows 7 or 8 64 bit, the route to it is:
    Users
    Owner
    AppData
    Roaming
    Adobe
    Elements Organizer
    11.0
    Organizer
    and in this Organizer Folder is the psa.prf file that you delete.
    Make sure that you have the Folder Option "Show Hidden Files, Folders, and Drives" active so that the path will be visible.
    The shortcut to all that is...as you hold down the Shift+Ctrl+Alt computer main keyboard keys (altogether), double click the Organizer tab at the bottom of the Premiere Elements 11 Expert view workspace. A pop up should appear asking your permission to delete this settings file. Click Yes to that.
    2. How are you trying to gain access to the Elements Organizer...
    a. Welcome Screen - Organizer
    or
    b. Clicking on the Organizer tab at the bottom of the Premiere Elements 11 Expert view workplace.
    If a or b lets you get into the Organizer, then you might consider creating a new catalog (File Menu/Catalog Manager) as well as disabling Auto-Analyzer options et al under Elements Organizer workspace Edit Menu/Preferences/Media-Analysis.
    Let us start there. We will be watching for your results.
    Thanks.
    ATR

  • I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    Homesharing only works with computers. If your using an ipad you want to use Airplay instead.
    http://support.apple.com/kb/ht4437?viewlocale=de_de&locale=de_de

  • I installed the lastest version of iTunes and when I went to manually sync my iPod I got a message saying error -50.  I tried re-installing the latest version of iTunes but that did not work.  I then tried re-installing an earlier version of iTunes

    I installed the latest version of iTunes but when I went to sync my iPod I got error message -50 and my iPod would not sync.  I tried re-installing the most recent version of iTunes but this made no difference.  I then tried installing an old version of iTunes but it would not install.  I am furious because I bought music via iTunes store and I cannot get it to load onto my iPod.  Can anyone help?  Or can anyone give me a direct email address for iTunes support?  I have been going round and round on Apple's stupid website and cannot find any help or an email address.

    Quit iTunes, reboot your PC, restart the iPad and then try again.
    Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for