Trying to install a printer driver
Why would my printer be telling me that the "software to be installed requires administrator or higher level access privilege" when I am the administrator and am using the right password?
no replies...
Similar Messages
-
Trying to install Accurip printer driver on Windows 8 x64
Hi there,
I have a driver for an Epson printer 4880 that I am trying to install on Windows 8 x64. The driver works fine on Windows 8 x32 but will not work on x64.
When I select the printer it asks me to point it to the driver location, which I select the .inf file for it and it appears to install. However it takes me back to select the printer and continues to go in that continuous loop.
I have checked the %windir$\inf\setupapi.devl.og and it appears to quit at Driver package failed signature verification.
Could somebody provide some help as to how I could get this to work?
ThanksHi,
Which driver did you use? I checked Epson official site, found this type of printer had Windows x64 driver. Please download and install it for test.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=94507&prodoid=63070982&infoType=Downloads&detected=yes&platform=OSF_W_8-64
Roger Lu
TechNet Community Support -
Problem installing HP Printer driver hplip-3.10.9
I am trying to install the printer driver for my HP Laserjet p1102w (hplip-3.10.9.run). The program starts then stops with the error "TabError: inconsistent use of tabs and spaces in indentatiion". I did some research, but it could not resolve the issue. I think it has something to do with the way python handles tabs?? I did not have any problem installing this on my Fedora 13 desktop. Not sure how to proceed.
Thanks!I have used the suggestions given, and I still can't get the printer driver to load. I did check the /var/log/cups/error-Log and found th following:
D[08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +connecting-to-device
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +hplip.plugin-error
D [08/Nov/2010:18:17:21 -0600] [Job 25] prnt/hpcups/HPCupsFilter.cpp 413: m_Job initialization failed with error = 48STATE: -connecting-to-device
The following was from a Fedora bug report. not sure if it is applicable to my problem
Tim Waugh 2010-04-23 11:17:41 EDT
Description of problem:
See in error_log from bug #520200 comment #7:
D [17/Apr/2010:12:34:43 +0530] [Job 29] prnt/hpcups/HPCupsFilter.cpp 413: m_Job
initialization failed with error = 48STATE: +connecting-to-device
There is a missing newline at the end of the string output from
HPCupsFilter.cpp:413.
In fact, looking around, there are *loads* of newlines missed from dbglog()
calls. This messes up STATE and ATTR reporting, as we can see above.
Version-Release number of selected component (if applicable):
hplip-3.10.2-4.fc11
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
At this point not sure what to try next -
I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?
Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?I am using windows XP. I have searched port 5353 and this is enabling Bonjour.
You could check this article, but it is about Firefox itself not having access.
: http://kb.mozillazine.org/Firewalls
Could you provide the exact wording and punctuation of the message, and try Googling that yourself -- when you google leave out unimportant words and punctuations, group words that are still together as in original message within quotes or with hyphens so that google will look for those words together in that order. -
hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to *
* compile the currently running kernel. This can cause unpredictable *
* behavior in kernel drivers and should be fixed. *
* gcc version: Linux) *
* kernel compiled with: 4.3.2 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name : kernel-source Relocations: /usr/src
Version : 2.6.27.29 Vendor: openSUSE
Release : 0.1.1 Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST Build Host: rinck
Group : Development/Sources Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size : 309251954 License: GPL v2 only
Signature : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager : http://bugs.opensuse.org
URL : http://www.kernel.org/
Summary : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
Linus Torvalds <[email protected]>
see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthickCheck this solution
-
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
How do I install a printer driver, without the printer?
You see, I don't want to print anything.
I am using some CAD software and I use the “create PDF” function of the printer dialogue to make a PDF. The problem is my drawing is quite large so I need to install a printer driver for a printer that handles larger paper (Epson 1280). I have the driver, but it refuses to install without the printer being attached to it.I didn't post one.
-
How to install HP printer driver *****
Hi,
How to install HP printer driver , so that i can see new device type in SPAD.
Thanks
LisaHi Lisa,
proceed as below.
1)Log in to HP-UX as root (or an other username that controls the printers, and has all the rights to the directories).
2)Type sam on the command line and press enter.
3)Scroll to Printer and Plotters with the vertical scrollbar.
4)Click twice on Printers and Plotters.
5)Double click on LP Spooler.
6)Click twice on Printers and Plotters.
7)Select Actions on the menu bar and click on Add Remote Printer/Plotter.
8)For Printer Name type any name, Remote System Name use the DNS/Host name, or alternatively use the dotted-IP (200.200.200.11). Remote Printer Name should be one of the destination ports on the Printnet (d1prn, d2prn, etc .). Also select Remote Printer is on a BSD System. Press OK and the server will install the printer.
9)Click on OK.
10)For a test print type lp d Printername /etc/protocols.
And finally dont forget to make this printer as the default printer if u have only this.
Right click on the printer and and say make default.
Regards,
Bapu -
Trying to install new printer Canon imageclass 4880
Trying to install new printer on Mac Snow Leopard. Instructions are only for Windows. How do I get started installing the software?
You'll need to find the drivers. I found the imageclass 4890 OS X 10.6 drivers here, but didn't find 4880 drivers. Check the global Canon web sites.
-
When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?
Have you checked on the Epson support site? R200 support is located here.
-
Duplex printing not working after installing HP Printer Driver Update 1.1.1
Hi,
our printers (Lexmark T622, HP Laserjet 2200, both equipped with a duplex unit) are managed by printer queues on our Mac OS X Server (10.5.5). Our users (mostly having Mac Books running 10.5.4 or 10.5.5) are printing by sending their jobs to the queues on the Mac OS X Server (via IPP/TCP/IP).
So far so good.
It seems that the users who have installed the "HP Printer Driver Update 1.1.1" aren't able to do duplex-printouts anymore. All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored. Users who haven't installed the update yet, don't have the problem (at least it seems to me like this, but I have to admit that I've tested it with only three different Mac Books, yet).
My questions are:
- Has anybody else observed this behaviour, yet?
- Or, even better, does anybody have a solution to it? Reinstalling the printer on an affected client doesn't solve it. That's what I tried already.
- Is there any possibility to make the printer driver update "undone", which means to do a kind of downgrade from 1.1.1 to 1.1?
Thank you very much in advance!
Best regards,
SteffenHi,
it seems that
http://discussions.apple.com/thread.jspa?threadID=1715794&tstart=0#8157481
fixes my problem.
Best regards,
Steffen -
Why is the rainbow color wheel spinning as I try to install a downloaded printer driver? It won't even let me put in the computer password to begin the install. Help!
Disconnect the printer. Restart your Mac.
Then try downloading the drivers.
If that doesn't help, exactly which printer drivers are you trying to download and from where? -
Any toughts on how to install the HP printer driver 1.1.1 on my MacBook Air
Where are you trying to download it from? Have you tried downloading and installing from this source: HP Printer Driver 1.1.1
OT
Maybe you are looking for
-
Ipod not working ... and not recognized by itunes suddenly
Sorry if you see this mail somewhere else. The 'new post' was not showing. I cannot seem to start a new thread. There is no 'new topic' at the top of my screen. So, I am going add this this thread as its the close to my problem My ipod, one day sudde
-
Importing image or graphic onto working layer?
I am using Photoshop cs4 When I work in Flash I can import a image or graphic to the library or directly onto the stage...My question is...Can I do this in photoshop? Thank you
-
Why is the Analog signal from the FPGA is distorted?
Hi, I am using the PXI-7831R board with LabView 2010. I'm trying to transmit TDMS files from the computer hard drive via the analog output of the 7831R. I've used the "Basic DMA output - R series" example and replaced the generated signal with a TDM
-
Replicate a 2tb NTSC HD to a 2tb Mac HD
After 30+ years in CP/M, DOS and Windows, I've just recently migrated from my Windows XP Pro computer to an iMac 27 (Lion 10.7.2). My 2 TB backup external hard drive is in NTSC format. I wish to replicate it to another external 2 TB HD formated
-
Apache web server 2.0 plugin issue with Iframes
I was wondering if anyone had any issues related to iframes when going from the Apache plugin for version 1.3 to version 2.0. Currently I'm having a problem where I use the mod_wl20.so plugin on Apache web server 2.0X and I will get a download dialog