Trying to install Accurip printer driver on Windows 8 x64

Hi there,
I have a driver for an Epson printer 4880 that I am trying to install on Windows 8 x64. The driver works fine on Windows 8 x32 but will not work on x64.
When I select the printer it asks me to point it to the driver location, which I select the .inf file for it and it appears to install. However it takes me back to select the printer and continues to go in that continuous loop.
I have checked the %windir$\inf\setupapi.devl.og and it appears to quit at Driver package failed signature verification.
Could somebody provide some help as to how I could get this to work?
Thanks

Hi,
Which driver did you use? I checked Epson official site, found this type of printer had Windows x64 driver. Please download and install it for test.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=94507&prodoid=63070982&infoType=Downloads&detected=yes&platform=OSF_W_8-64
Roger Lu
TechNet Community Support

Similar Messages

Trying to install a printer driver

Why would my printer be telling me that the "software to be installed requires administrator or higher level access privilege" when I am the administrator and am using the right password?

no replies...

Problem installing HP Printer driver hplip-3.10.9

I am trying to install the printer driver for my HP Laserjet p1102w (hplip-3.10.9.run). The program starts then stops with the error "TabError: inconsistent use of tabs and spaces in indentatiion". I did some research, but it could not resolve the issue. I think it has something to do with the way python handles tabs?? I did not have any problem installing this on my Fedora 13 desktop. Not sure how to proceed.
Thanks!

I have used the suggestions given, and I still can't get the printer driver to load. I did check the /var/log/cups/error-Log and found th following:
D[08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +connecting-to-device
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +hplip.plugin-error
D [08/Nov/2010:18:17:21 -0600] [Job 25] prnt/hpcups/HPCupsFilter.cpp 413: m_Job initialization failed with error = 48STATE: -connecting-to-device
The following was from a Fedora bug report. not sure if it is applicable to my problem
Tim Waugh 2010-04-23 11:17:41 EDT
Description of problem:
See in error_log from bug #520200 comment #7:
D [17/Apr/2010:12:34:43 +0530] [Job 29] prnt/hpcups/HPCupsFilter.cpp 413: m_Job
initialization failed with error = 48STATE: +connecting-to-device
There is a missing newline at the end of the string output from
HPCupsFilter.cpp:413.
In fact, looking around, there are *loads* of newlines missed from dbglog()
calls. This messes up STATE and ATTR reporting, as we can see above.
Version-Release number of selected component (if applicable):
hplip-3.10.2-4.fc11
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
At this point not sure what to try next

Error Installing Print Driver on Windows 2008 Server R2

I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray Pietrzak

Hi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

I'm trying to install OEM SR 2.1: Windows 95B in Qemu... How do I figure out which brand of CD-ROM drive Qemu emulates since I have three different drive specific boot disks...?

I'm trying to install OEM SR 2.1: Windows 95B in Qemu... How do I figure out which brand of CD-ROM drive Qemu emulates since I have three different drive specific boot disks...?

Not exactly...; all MS produced Win9X/ME install CDs are ISO-9660 & maybe even Joliet too... The really confusing part is that not all Windows 98 SE full install CDs are even bootable in the first place (they tend to only ship one if the PC is capable of booting directly from its optical drive...; the vast majority of PCs have to use the chain loading method due to buggy, poorly written, outdated BIOSes...; etc.). OEM SR 2.1/Windows 95B is really quite special & innovative for its time in that it was the first Service Release of Windows 95 to support larger HDs via FAT32 which back then was still brand new: i.e.: exciting technology & it still has proven to be quite useful & versatile since most flash memory storage devices come pre-formatted FAT32.
There's also a hidden X:\Usbsupp folder on the CD that contains the MS USB 1.1 supplement patches/upgrader: a common mis-nomer is that you don't need to install it unless your PC has USB 1.1 ports. Even without USB 1.1 ports the upgrades to C:\Windows\system make it a lot less buggy, more secure & stable. For anyone else that enjoys emulating OEM SR 2.1 there's also a great unofficial SP 1 for it which has so many useful patches in it I'm considering integrating it into all of my install CDs...
Unfortunately I've found that getting it to run decently requires tracking down a bevy of essential but according to MS's not releasing them in patch form optional DLL upgrades... I guess not all machines are that unreliable but better to have them...; just in case you encounter a PC with a buggy BIOS that has hardware coniptions and/or ACPI/APM bugs.

I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

C7280 printer driver for Windows 7 RTM

Hello,
I have just installed Windows 7 (i.e. the full released version, not a beta or a release candidate) and am trying to find a printer driver for my Photosmart C7280 all-in-one but it seems there isn't one available right now.
Can anyone out there let me know when such a driver will be available?
Thanks
Jamie
This question was solved.
View Solution.

October 22nd, when the full version will be released to the public. Windows 7 also has C7280 drivers included in it. So just plug it in, and it should work.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?

I am trying to install Kodak printer ESP C310 but it says a firewall is blocking the installation. Can you help?I am using windows XP. I have searched port 5353 and this is enabling Bonjour.

You could check this article, but it is about Firefox itself not having access.
: http://kb.mozillazine.org/Firewalls
Could you provide the exact wording and punctuation of the message, and try Googling that yourself -- when you google leave out unimportant words and punctuations, group words that are still together as in original message within quotes or with hyphens so that google will look for those words together in that order.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Need HP Lasejet 1160 Printer driver for windows 8.1 64 bit

Hi,
The drivers are available via Windows Update, follow these steps to install the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Be aware that the printer only support USB connectivity on Windows 8.1, network connection is not supported for the operating system if you use an HP print server:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=41061...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Trying to install new printer Canon imageclass 4880

Trying to install new printer on Mac Snow Leopard. Instructions are only for Windows. How do I get started installing the software?

You'll need to find the drivers. I found the imageclass 4890 OS X 10.6 drivers here, but didn't find 4880 drivers. Check the global Canon web sites.

How can I download a Generic Post Script printer Driver for Windows 7 .

How can I download a Generic Post Script printer Driver for Windows 7

We used to install this PostScript printer for previous Windows releases from
(winsteng) and run it to install the driver from the below location
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1500
This doesnt work with Win 7 (The install crashes ) , Basically looking to do the same process with Win 7

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and get Itunes error HRESULT: 0x800736B3

Hello,
I am Trying to install iTunes 12.1 for Windows 8.1 (64-bit) and I get an Itunes window with an error that says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version'8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b"processorArchitecture="amd64". Please refer to help and Support for more information.HRESULT: 0x800736B3
I already:
- Uninstalled all old Itunes versions.
- Tried a clean reboot to install the new version,
- Installed the security update’ Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update’
But I still get the same error.
Can someone help?
Thanks!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you still have trouble you might consider installing the alternate version iTunes 12.1 for Windows (64-bit — for older video cards) where you can download a 64-bit installer for the 32-bit version of iTunes that works with older video cards. This version may also be useful for anyone who is unable to get the 64-bit version of Apple Application Support to install when using the itunes6464setup file, or has trouble with playback of certain video files despite having QuickTime installed.
tt2

Trying to install Accurip printer driver on Windows 8 x64

Similar Messages

Maybe you are looking for