Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

Similar Messages

Hi all , i tried to install os x mountain lion i could not it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks

Hi all , i tried to install os x mountain lion i could not it said ( There was an error in the App Store. Please try again later. (100) ... now tow weeks

Hello, might be good luck on your part!
Anyway...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk.

I've installed Mavericks but it still shows up in the App Store as "Download"

I've installed Mavericks several times - from the update section of the App Store to the Featured Section and even tried using cmd-r and a fresh install of the OS. Looks like it installed fine, but it still shows up in the App Store as to be downloaded and not installed.

Spoke with Apple Customer Care. They said it was normal and allowed Mavericks to be downloaded on multiple machines. Looks like all went well.

In 6/2009 I bought iWork Family pack and have used it on two computers. Now I want to download iWork to my iMac but there is no way via the App store. How do I install the iWork bundle I paid for.

In 6/2009 I bought iWork Family pack and have used it on two computers. Now I want to download iWork to my iMac but there is no way via the App store. How do I install the iWork bundle I paid for.i

As of a minute ago you can still download the trial at this link. Note: clicking the link will automatically start the download.

I am trying to download an app for my ipod touch, but its not showing up in the app store. Its the icess app for controlling a bluetooth helicopter

I recently got my daughter an iCess RC helicopter. It works via bluetooth and can be used with Apple and Android devices. She has a ipod touch, but when trying to do a search for "iCess" in the app store, nothing comes up. It shows up on my PC in the itunes store, but how do I get it on the ipod touch or its apps store?
Also having the same problem when trying to locate the app with my iPad and its app store. I got it installed on one of my android devices via the Google Play store so I know its there & works. Any ideas or suggestion on what is going on here with the iPod and iPad app stores?

The RC helicopter's directions say its available in the App store for Apple and here it is in the iTunes store:
https://itunes.apple.com/us/app/icess/id558793179?mt=8 (released on 6/19/2013)
How do I get this to show up on my iPad and/or iPod touch app stores so I can then download and install it as needed?

I have installed the latest version of iTunes but it still shows outstanding in the App Store

I have updated the latest version of iTunes [11.2.1] but in the App Store it is still showing as outstanding and that it needs to be installed. How do I fix this?

Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M.

HT1296 I updated my ipod touch with IOS 6, then downloaded You tube onto my computer then tries to synch it with my ipod. The you tube app icon is present on the computer but doesn't appear on ipod. the app store states that it is installed but it isn't.

Help! I updated my son's ipod touch with the IOS 6 update. Then i downloaded the new You tube app onto my itunes on the computer. When i synched my ipod the computer showa You Tube on the ipod but it isn't there and i cannot get it reinstalled. please help. This is very frusterating because there is obviously a glitch and i can't fix it. Any suggestions?

Have you tired using the Spotlight search? Maybe you just can't find it.
Do you have Restrictions on that would hid the app? Settings>General>Restrictions.

A box appears around the apps i am trying to click on and i cant scroll. I have to click about ten times for the app to work

A box appears around the apps I am trying to click on and I can't scroll. I have to click many times for the app to work.

Sounds like you have VoiceOver (one of the accessibility features) 'on' - if you turn the volume up do you get a voice saying what you are tapping ? If you do then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.
If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
when i click the apple in the top left corner the whole menu is greyed out... what to do ? help me please
Sincerly AppleNoob92
p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

HT5628 Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.

I am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?thanks jake

i am trying to install itunes on my computer which is running windows 7, sp1, 64 bit. i get the message 'THIS INSTALLATION PACKAGE COULD NOT BE OPENED.VERIFY THAT THIS PACKAGE EXISTS, ETC'. any ideas how to fix?
thanks jake

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and ican't access mac or win 7 what should I do i cant format it because i dont have a backup

I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup

It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.

I have an airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it

I'm trying to install software from Yamaha keyboards to connect my keyboard to my computer. I insert the CD and nothing happens. Yamaha told me to "find your CD drive" and open the software. How do I find the CD drive?

I'm trying to install software from Yamaha keyboards to connect my keyboard to my computer. I insert the CD and nothing happens. Yamaha told me to "find your CD drive" and open the software. How do I find the CD drive?

When you insert a CD/DVD in the optical drive, does an icon appear on the desktop? If not open Finder Preferences and check the appropriate box(s).
Ciao.

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

Similar Messages

Maybe you are looking for