Trying to install Arch Linux on a HP-dv2000 laptop

I am able to start up from, the CD no problem. I get the Arch Linux menu. What I think is the problem is maybe a resolution issue because as I go to install it, the screen looks wonky and I can't see the command line properly. I know when I install Ubuntu for example, the installation screen looks off to one side. Only after installing the nvidia driver after successfully installing Ubuntu does the screen look the way it supposed to.
I think the same think is happening here when trying to install Arch Linux. Any suggestions on how I can resolve this? This is a big deal for me because for the first time, I think I am going to learn a ton of stuff about Arch Linux. I am willing to take the plunge following the beginner's guide along the way.
Thanks for the help!!

ArchLinux is designed to run whether in VirtualBox or on a real machine.
If you have a TV connector plugged in it will chop some regular lines at the bottom to make up for the difference in TV resolution.
There are a couple of packages related to nvidia hardware, nouveau is one of them. Just do a pacman -Ss nvidia for possibilities of things you might need to install. Your nvidia hardware is a little newer, so probably nvidia is the package you'll need instead of nouveau.
Are you using X? When you install the proper xf86-video-* driver it shouldn't have any problems with X. If modesetting is turned off, then some resolutions may not be made available (especially in Gnome), so it is best to keep it turned on if at all possible (kernel default).
Last edited by nomorewindows (2012-03-12 17:19:55)

Similar Messages

[SOLVED] Trying to install Arch Linux from harddisk using /dev/sda2

Hi
I'm trying to install Arch using my swap partition, following this wiki entry: https://wiki.archlinux.org/index.php/Ha … stallation
What I've done:
Downloaded ISO: archlinux-2010.05-netinstall-i686.iso
Command: swapoff /dev/sda2
Command: fdisk /dev/sda and changed the system type to 83 (Linux) on /dev/sda2
Now it looks like:
Command (m for help): p
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00017e5b
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1060289 530144+ 83 Linux
/dev/sda2 1060290 3164804 1052257+ 83 Linux
/dev/sda3 3164805 105579179 51207187+ 83 Linux
/dev/sda4 105579180 488392064 191406442+ 83 Linux
It complained about device was busy, but it still seemed to have changed the system type, so I did partprobe as it wrote.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@swamp ~]# partprobe
<no output>
Next I did:
[root@swamp ~]# dd if=archlinux-2010.05-netinstall-i686.iso of=/dev/sda2
327680+0 records in
327680+0 records out
167772160 bytes (168 MB) copied, 4.3025 s, 39.0 MB/s
[root@swamp ~]# mkdir /mnt/sda2
[root@swamp ~]# mount /dev/sda2 /mnt/sda2
mount: warning: /mnt/sda2 seems to be mounted read-only.
[root@swamp ~]# ls -al /mnt/sda2
total 150466
dr-xr-xr-x 3 root root 240 May 16 15:54 .
drwxr-xr-x 6 root root 4096 Nov 5 01:40 ..
dr-xr-xr-x 3 root root 556 May 16 15:52 boot
-r--r--r-- 1 root root 448 May 16 15:54 isomounts
-r--r--r-- 1 root root 8192 May 16 15:54 overlay.sqfs
-r--r--r-- 1 root root 154058752 May 16 15:54 root-image.sqfs
And unmounted it again.
The wiki page says to type: fsck -f /dev/sda2fsck, but I get no such file while trying to open sda2fsck.
[root@swamp ~]# fsck -f /dev/sda2fsck
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
fsck.ext2: No such file or directory while trying to open /dev/sda2fsck
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
Can I ignore the above and continue modifying grub?
Thanks :-)
Last edited by valvet (2010-11-08 14:49:07)

fsck -f /dev/sda2fsck makes no sense because /dev/sda2fsck is not a deivce. If the wiki says that, then it is wrong. It's only doing a fsck anyway so probably not really needed. If you are just formatting th swap partition then use, mkfs.ext{234}.
edit:
from the wiki
# fsck -f /dev/sda2fsck 1.40.8 (13-Mar-2008)
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda2: 243/78936 files (8.2% non-contiguous), 310519/314880 blocks
The first like should just be
# fsck -f /dev/sda2
Last edited by sand_man (2010-11-05 06:46:01)

Trying to Install Arch PPC

Hi
I am trying to install Arch Linux PPC from the ISO on their site. I have run into a problem. When it comes to installing the packages I get and error about "key could not be looked up remotely" with different keys mentioned. I have tried changing the SigLevel to Never in /etc/pacman.conf but this seems to get over written when I start the package install form the installer (/arch/setup). How can I get round this?
Thanks
Robert

Hi
Thank you for the reply and information. I have gotten further. I am now stuck at installing the boot loader. I get an error that says:
Unable to find OpenFirmware path for boot=/dev/sda2
Please add ofboot=<path> where <path> is the OpenFirmware path to /dev/sda2 to /etc/yaboot.conf
So I have Googled and that ofpath should give me this information. But I then get this error when I run ofpath /dev/sdb2:
Unable to determind controller path!
Am I doing the right thing to find out the OpenFirmware path? Is there anything else I can try?
Thanks
Robert

Keyboard and mouse not working when installing arch linux 2014.01.05

trying to install arch linux 2014.01.05 dual iso but when I boot the live cd my keyboard and mouse (both wired) arent detected.
please help

I am from australia > melbourne victoria and usually type in english us or english australian (which keymap do I use in the arch linux install process?) arch linux still does not detect my kb and mouse when on desktop (usb keyboard)...stumped.
Last edited by yoshiserry (2014-01-27 07:44:05)

Installing Arch Linux after Windows 7 64bit dual boot

Total noob here ^^
Im trying to install Arch Linux after my installation of Windows 7, without fucking up that one...
I freed up 50GB and removed it from my Windows boot partition, so Arch can be installed there, I have almost absolutely no experience with this kind of stuff since I've only used Ubuntu and Kali Linux before.
I've got a working arch image on my usb stick and i somehow can't figure out, how to install it without touching the existing partitions.
Is it possible to create a working dual boot, without changing my windows configuration?

yes its possible. What research have you done in order to install Arch. We do not hand hold here in this community. Go read up the appropriate wiki pages and ask specific questions with details in case you get stuck.
Start with the Beginners Guide.

Install Arch Linux with UEFI and GPT

Hi, I purchased a new laptop and I created a partition with Windows 8 (default OS on laptop) and another partition where I want to install Arch Linux.
When I tried to install Arch Linux not boot from CD. After searching in Google I downloaded the latest Arch Linux ISO (2012-12-01) and tried again.
This time CD started without problems but when I used cfdisk showed an error with GPT partition. I went back to search in Google and I read about gdisk and gfdisk and I try it but when I partitioning to install Arch Linux partition show that may cause damage. I searched and searched without success and I wonder if there is a Arch Linux GPT install guide or if someone knows how to install Arch Linux with GPT and a Windows 8 partition in UEFI.
Thanks and regards.

Hi again, finally I got "install" Arch Linux but when I reboot the follow message appears:
"No Booteable Device, Hit any key."
I don't know if I broke Windows Boot Manager, UEFI or both...
I tried to reinstall GRUB but was unsuccessful.
Can anyone help me?
Thanks and regards.

Recovering earlier installed Windows 7 after installing Arch Linux

I'm trying to boot windows on my ASUS notebook.
There was windows 7 from the very beginning (disks C:\ and D:\), then I divided disk D:\ on several partitions and installed Arch Linux. I overwrited Windows boot information by boot part of Linux. Now I want to recover windows, that I still have on hard drive. It doesn's matter what there will be: dualboot or only windows (but dualboot is prefered).
Disk info:
[jhon@fckrsns ~]$ sudo fdisk -l
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 1AFC9DFF-CD3B-4CE1-8CAF-41C3E5B75772
Device Start End Size Type
/dev/sda1 2048 411647 200M EFI System
/dev/sda2 411648 673791 128M Microsoft reserved
/dev/sda3 673792 586731519 279.5G Microsoft basic data
/dev/sda4 586731520 691589119 50G Linux filesystem
/dev/sda5 1412718592 1465147391 25G Windows recovery environment
/dev/sda6 691589120 901304319 100G Linux filesystem
/dev/sda7 901304320 1412718591 243.9G Microsoft basic data
[jhon@fckrsns ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 698.7G 0 disk
├─sda1 8:1 0 200M 0 part /boot
├─sda2 8:2 0 128M 0 part
├─sda3 8:3 0 279.5G 0 part
├─sda4 8:4 0 50G 0 part /
├─sda5 8:5 0 25G 0 part
├─sda6 8:6 0 100G 0 part /home
└─sda7 8:7 0 243.9G 0 part
sr0 11:0 1 1024M 0 rom
[jhon@fckrsns ~]$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 vfat 4DEB-D6D2 /boot
├─sda2
├─sda3 ntfs OS 62364BE9364BBCB3
├─sda4 ext4 c4da4683-871a-49fa-96a3-4da11387d31d /
├─sda5 ntfs Recovery 8ECE4F50CE4F2FAF
├─sda6 ext4 3eba01c6-e422-4542-8442-16064c74a563 /home
└─sda7 ntfs 3B29E7794F6CD932
sr0
OS partition (/dev/sda3):
[jhon@fckrsns /]$ ls /run/media/jhon/OS
altera Boot djvureader DrWeb Quarantine eSupport hiberfil.sys MSOCache N56VM.BIN pagefile.sys Program Files Recovery SecurityScanner.dll VisualCLibs
AsusVibeData bootmgr Documents and Settings eclipse Games Intel MS.Office.2007.Portable.micro.v.1.16 N56VZ.BIN PerfLogs Program Files (x86) $Recycle.Bin System Volume Information Windows
AVScanner.ini BOOTSECT.BAK DOSBox_SIM END gcc Keil_v5 mtd NVIDIA ProgramData Qt R.G. Catalyst Users
I tried to recover MBR with different ways:
with syslinux:
[jhon@fckrsns /]$ sudo dd if=/usr/lib/syslinux/bios/mbr.bin of=/dev/sda
0+1 records in
0+1 records out
440 bytes (440 B) copied, 0.0226394 s, 19.4 kB/s
with ms-sys:
[jhon@fckrsns /]$ sudo ms-sys --partition /dev/sda1
Start sector 2048 (nr of hidden sectors) successfully written to /dev/sda1
Physical disk drive id 0x80 (C:) successfully written to /dev/sda1
Number of heads (255) successfully written to /dev/sda1
[jhon@fckrsns /]$ sudo ms-sys --mbr7 /dev/sda
Windows 7 master boot record successfully written to /dev/sda
But there is still no way to boot windows.
I run grub-mkconfig before and after these manipulations with MBR:
[jhon@fckrsns ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
Found fallback initramfs image: /boot/initramfs-linux-fallback.img
No volume groups found
done
[jhon@fckrsns /]$ sudo os-prober
/dev/cdrom: open failed: No medium found
No volume groups found
I installed rEFInd, now I have two choices on boot screen: vmlinuz-linux, which it founded, and my earlier installed grub bootloader.
Maybe I missed something, but i don't know what exactly.
Last edited by Jhon (2014-09-28 16:45:38)

Now I know that I don't need MBR at all (but google told me that recovering windows = recovering MBR..)
Are there any ways to recover boot information on EFI system partition from Linux without using Windows Live CD and it's bootrec.exe?
I have bootmgr and bootmgfw.efi files on /dev/sda3 (partition with windows installed), what else I need? Simple copy of bootmgfw.efi to /boot/EFI/Microsoft/Boot/bootmgfw.efi and addition of custom menu item to /etc/grub.d/40_custom does'nt work. There is Windows now in rEFInd and GRUB menus, but there is error on loading.

Can I install Arch Linux without Internet connection ?

It sounds noobish but my friends like to know if they can install Arch Linux without Internet connection ?

mcmillan wrote:
The core iso should be all you need, just boot off that to start the installation. It's been a while since I did an install, but somewhere along the way it gives you an option to install off the cd or do a net install. You just need to choose the cd installation.
That being said, all you'll have without internet will be what's on the cd, so you'll be left with a pretty minimal install. If you want to update and install additional software then you'll either need to get the computer temporarily connected, or download the packages on a different computer and transfer them.
I am looking to do something similar. I have the core system installed on an older laptop, but I cannot get the wireless working (it has no ethernet). I've tried downloading the libgl packagesfrom a mirror to a thumbdrive, but it's a dependency nightmare. Is there a better way to do this?

Is it suitable install Arch Linux on a USB key?

I want to install Arch Linux on a USB key following the wiki https://wiki.archlinux.org/index.php/In … _a_USB_key
But I now heard that Arch Linux will be very very slow than LiveUSB because of USB's bad I/O speed. Is it real?
Forgive my poor English, thank you!

Actually I spent some times to study USB, and I concluded out that it is relate with USB's performance, as example, USB 3.0 is better than USB 2.0, SLC is better than MLC.
So the better performance of USB the more suitable to install Arch Linux. However, it will costs me much money to buy expensive USB:)
@Mr Green What's your blog? Is this http://archbang.org/?

Trying to install Arch on a SD card.

I have an EEE PC 900 and was trying to install arch on a 32gb sd card.
Every kernel I have tried so far boots then during bootup says it cannot find the root drive.
I tried changing the root delay but that didn't work. So far I tried the defalt kernel and toofisnes's kernel and both came up with the same error.
Can anyone help point me in the right direction?

keenerd wrote:Did you enable USB booting when installing the kernel?
redsteakraw wrote:my bios can boot from the SD fine. Grub also boots fine off of the sd card. I ran the arch installer from a usb thumb drive. and II am currently running knoppix off of a SD card.
Good. Glad to hear that your motherboard supports usb boot. However, you did not understand my question.
Think back to when you installed Arch And it asks if you want to boot from an encrypted/RAID/LVM/USB/etc root partition? That USB option is pretty important. (Post-install it is one of the mkinitcpio hooks.) Without it, your kernel will not have the drivers to read your root partition.
Reinstall from the Arch iso. When you get to the kernel step, it will ask "Do you want to boot from USB?" Select "yes".

How to partition a USB flash-drive to install Arch Linux?

Good afternoon,
Could anyone please guide me in the right direction, how would I go about partitioning my USB flash-drive in order to install Arch Linux onto my Acer Aspire One? I've found guides, but none of them are specific enough - the static assumption being that the OS is already partitioned onto your flash-drive, and that is not the case for me.
Much appreciated,
A Swiftly Tilting Planet

assuming your usb key is /dev/sdz
# dd if=/dev/zero of=/dev/sdz
//cleans the usb drive
# fdisk /dev/sdz
// press m and read the help, make a partition, make it bootable
// you have to press (double check anyway):
// n, p, 1, <enter>, <enter>, a, 1, t, b, w
# mkfs.vfat /dev/sdz1
// formatting
The first passage can actually replaced to something more modest, like:
# dd if=/dev/zero of=/dev/sdz bs=1024 count=1
Last edited by ezzetabi (2009-01-03 16:37:04)

Problemes installing Arch Linux on Acer Aspire One

Hello!
I'm trying to install Arch on AA1, but it seems that it wont cooperate with me
My problem is that I've used unetbootin to make my Corsair memorystick bootable, and it works fine to boot with and start /arch/setup. But when I come in to "prepare hard drive" and onto "Partition Hard Drives" it says this:
Available Disks:
/dev/sda: 7680 MiB (7 GiB)
/dev/sdb: 114473 MiB (111 GiB)
And I can't install Arch while my harddrive is listed as "sdb" and my stick occpies "sda". And I've tried to switch usb-ports with zero results. Any suggestions?

When I just tried now it worked. HD on sda and stick on sdb. Strange, strange world.

Failure to install Arch Linux via netinstall AIF; PGP key issues

Hello,
I'm am attempting a fresh install Arch Linux on a clean machine: Dell 1420, 4GB RAM. I am using the archlinux-2012.02.09_04-00-01-netinstall-dual.iso installer.
Installation progresses nicely through the package selection (I choose core, core-dev, xfce, and xorg packages only, to keep it simple for now). The packages download quickly, and then the installation fails during installation indicating that none of the PGP keys are known for any of the downloaded files. The process essentially aborts and I press 'Continue' returning me to the main menu. I have repeated this process several times.
What needs to be done to install Arch Linux?
Thanks.

Hi,
Thanks, I have been through the Beginners Guide. I just want to get Arch Linux to "start" with a very basic GUI. during one of my installation iterations I did install only 'core' files, but the same failure occurred. so I'm at a loss as to how to get even a basic installation to take hold. Thoughts on the pgp key issues?
Thanks.
Update: I've switched to using the default net installer (2011.08.19) and the installation succeeded!
Last edited by zaleksf (2012-02-12 05:12:32)

Archwiz Script for installing Arch Linux

I created a new Bash Script Project called Archwiz, located on github flesh/archwiz ,
its still in Beta for a few reasons, I never figured out how to get computer translations working in the script so I can Localize it, and I never figured out all the details to get an AUR custom repo working and lastly I didn't get the Asynchronous downloads to work right, so there are all disabled in this script.
This script was a fork of another script found here Archlinux Ultimate Install Script.
The Script itself has several files, the wizard.sh is a library, that allow programmers to use this library as an API for writing scripts, so its usefully to anyone that wants an API to write Bash Scripts, but the script itself scripts a script that is saved as configuration files, then executes the script inside itself, so you can look at all the configuration files before running it.
The script was written for use by anyone, but mostly targets programmers like myself who need to setup a machine to use as a work station and want it set up a certain way every time, although this script is far from finished, I have a lot of tweaking to do to it before it would be completely there, but as it is, I can get up and running on a machine with little effort, so this make it ideal for a Linux Administrator who has to install thousands of OS's and have them configured all the same way, but works great for someone just wanting to install Arch Linux.
The Project is Self Documenting and Self Localizing, although currently only English works, but the po files are there, so it would be easy enough if you wanted to localize it; but the computer translation function I started would be the correct way to do this.
The scripts makes use of a custom repo, so remove it when finished, the script should do this for you, but just to let you know, it downloads the core to the flash drive, this way it can install very fast, once you install it one, it has all the files on it to install on another computer without an Internet connection, well at least that was my thinking, I never did get the AUR custom repo to work, but the idea is to have all the files on the flash so you do not need to use up bandwidth installing Arch Linux on a new machine, just install it, then run pacman updates.
The Idea of a Wizard is to make the life of those installing an OS, much easier, they have the Option to do a Custom install, or a Wizard install, even an Automatic install to pre-configure machines.
The script determines if you have UEFI Bios or not, and formats and configures the Hard Drive correctly, and gives you full control over the partitioning of the drive, within the bounds of the tools used, so its very flexible, it uses systemd, so boot time on my machine is 10 seconds flat, and that's because I mount a lot of network drives and map them at boot time, I got 2 seconds boot time with mounting, so the packages are not perfect, but they do work.
I only tested GDM, since I installed every Desktop Manager and configuration for my needs, this was the only one I got to work for all of them, but I normally use KDE or Mate, but I ran into issues with Mate and went back to KDE, so I could get back to work.
This script was designed to Format the Drive you install it to, so do not use this on a Partitioned Drive, it will format the hard drive, so you are warned once more during the install, but this could be fixed, I had to abandon the project to finish another, so the script is as it is, but could give someone a great start if they want to folk it and finish it, so fork me.
See the help.html for details.
Last edited by Flesh (2013-02-28 00:31:54)

Moving to Community Contributions...

Trying to use Arch Linux with a T-Mobile HSPDA E1750 USB dongle

Hello all,
I have just installed Arch Linux on my desktop and need a way to either connect it to my LAN which is sharing the dongle connection from my laptop running ubuntu 10.04 via, ICS, DHCP3 and FIrestarter, Or simply plug in the dongle to my Arch Desktop. I have been researching commands to connect to networks with all day and have had no luck. My internet connection is being shared over ethernet through a DSL-2640R router.
I need this connection so i can install the GUI and make it fully functional. So if anyone has any ideas, guides or sites that may help me with this problem then please share.
Thank you,
SlashWannabe94

Hello, I bought a Huawei E1750, too. Today I got it working.
The most important things I got from here.
However, my stick differs a bit from yours as it has product ID 1436.
There was no need for an udev-rule, I wouldn't even know where to put it in etc (there is no udev/rules.d folder in arch?).
You need "usb_modeswitch" and the "option" module. At first I wrote an usb_modeswitch configuration, but it seems not necessary as commenting it out had no influence. The option module is loaded for me if i plug the stick in, no need to care about it further. So, except for installing usb_modeswitch everything works out of the box.
If dmesg tells you something like:
[33750.443606] cdc_ether 2-1.5:1.1: wwan0: register 'cdc_ether' at usb-0000:00:1d.0-1.5, Mobile Broadband Network Device, 02:50:f3:00:00:00
[33750.443756] usbcore: registered new interface driver cdc_ether
[33750.455202] USB Serial support registered for GSM modem (1-port)
[33750.455286] option 2-1.5:1.0: GSM modem (1-port) converter detected
[33750.455665] usb 2-1.5: GSM modem (1-port) converter now attached to ttyUSB0
[33750.455692] option 2-1.5:1.3: GSM modem (1-port) converter detected
[33750.455823] usb 2-1.5: GSM modem (1-port) converter now attached to ttyUSB1
[33750.455839] option 2-1.5:1.4: GSM modem (1-port) converter detected
[33750.455967] usb 2-1.5: GSM modem (1-port) converter now attached to ttyUSB2
that should be the case for you, too. This means modeswitch did its job and you are ready to connect.
Now you have to tell your pin to the stick and connect. I'm doing this using "wvdial" and "pppd".
You'll need the "ppp_generic" module to proceed.
My /etc/wvdial.conf looks like this:
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
[Dialer pin]
Init1 = AT+CPIN=1234
[Dialer provider]
Phone = *99#
Username = fonic
Password = fonic
Stupid Mode = 1
Dial Command = ATDT
Init2 = ATZ
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init4 = AT+CGDCONT=1,"IP","pinternet.interkom.de"
Adopting the pin and the connection address should do. Then you can start your internet by typing:
wvdial pin
wvdial provider
I have to admit wvdial did not work at first(the device refused the AT commands). From frustration I started windows to see if it works there, it did, and the next day this whole configuration simply worked.
Success!
Last edited by stuffel (2011-07-20 22:36:12)

Trying to install Arch Linux on a HP-dv2000 laptop

Similar Messages

Maybe you are looking for