Trying to install FF 4 beta 2 for Maemo 5 on my N900 but it still shows as 1.1.
Trying to install FF 4 beta 2 for Maemo 5 on my N900 but it still shows as 1.1. Uninstalled, removed all Mozilla repositories, rebooted, sufed back to firefox.com/m/beta and clicked the install link. The N900 switched over to my app manager and re-installed the beta repository then tried to download/install 1.1.
Has the repository been updated for beta 2?
There's a problem with the Maemo application manager that causes it to always use the version in the Ovi Store, even if you try to install a newer version from a different source. For a possible solution, see http://talk.maemo.org/showthread.php?t=63508
Similar Messages
-
I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time. I have tried disabling my antivirus software without success. I have looked for solutions to error 1603, and have tried what it suggests (empty temp files in Windows, etc.), also without success.There is nothing that mentions Window 8 or 8.1 operating system, though. Is this the issue? Please help.
Hi Dawn,
We might want to have a look at the install logs to determine the cause.
Please try the following basic steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave -
My iPad is stuck with the apple and the updating line but it is not finishing the update and the iPad is stuck I can't shut it off nothing is working just the bright white apple in the window.
Hi rm44,
Try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Home or Lock screen will display. Once the device is back up, go to Settings>General>About, and see what version is displaying. If it has the iOS number you were updating to, then you are all set.
If it has the old iOS version number, then the update did not take place. The best thing to do in that situation is to hook the device up to iTunes on the computer you sync with, and to update via iTunes.
Cheers,
GB -
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0 -
I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.
No.
You must restore. -
My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" shows up. What should I do? I can't lauch Pages till now.
The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
why does the app store ask for my payment details to be confirmed when i am trying to install a free app (facebook for iphone)
Just select no credit card click below
http://support.apple.com/kb/ht2534 -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
When trying to install downloaded software I am prompted to connect to the internet but I am already connected. This also occurs when trying to install an Adobe update.
A cable modem always needs a complete reset whenever you change the device that it is connected to.
To get your Internet signal restored, it will require at least one major step including the reset of your modem and complete network power cycle.
If that is not successful, the second major step is to reset the AirPort Extrreme back to factory defaults and then combine the steps above again.
Try this first:
Push the reset button on the cable modem (if present) and pull the internal batter (if easily accessible) then power off the modem
Power off everything else on your network....all devices....order is not important
Wait at least 20 minutes...longer will not hurt
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots or world icon) on the AirPort Extreme
Re-install the modem battery if it was pulled in the step above
Power up the modem and let it run for 4-5 minutes by itself
Power up the AirPort Extreme and let it run for 4-5 minutes
Power up each other network device one at a time about a minute apart until everything is powered back up
Check the network for proper operation -
I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?
All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.
-
When trying to download Apps, ipad keeps asking for password. Correct password given but has no effect and box requesting password input appears again.
Try downloading something in the iTunes app on the iPad and see if that gets you out of the password loop that you are stuck in.
-
Hello everybody!
I tried to install iTunes 10.5 update and everything seemed to be OK, but when it finished an installation there were stil 10.4.1 version of iTunes.
Does smbd know why?I'm having the same issue. Lion is up to date with v10.7.2. Currently running iTunes 10.4. Tried installing the regular way...un-installing, re-installing...re-downloading from internet...dragging the install into iTunes icon on dock...I'm perplexed. Every time I plug in iPhone or iPad, it tells me there's an update available - when I click to update, it's the same thing - then the software update utility keeps stating that all software is up to date. Sigh...I feel as though I'm chasing my tail.
Hopefully, there are answers out there! iOS 5 is so cool!!! -
My PC is not getting authorized & I am not able to sync my I pad with my PC any more nor Im able to install any app. I recently reinstalled my windows. Please help. I tried authorizing with my ID but it still shows the message computer is no longer authorized.
It may think it's a new computer.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.
Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that.
Maybe you are looking for
-
How to get out the E+ from the axis in Diadem Report?
Hallo on the photo you can see numbers written like 10E+5 etc. Like I have done the 10^5 shall be written in front of the unit and not after the numbers. The channel is created with Diadem Analysis Thank You
-
Why am I not able to put plug-ins on the master track?
so my problem is that the volume of tracks in logic is correctly and if I listen to them in itunes they are way lower. I put an adaptive limiter, a match eq, a multripressor and gain on the output track and nothing changed. How can I solve that probl
-
HT1600 how do i move a purchased film in itunes to shared video so i can see it on apple tv
how do i move a purchased film in itunes to shared videos so it links into apple tv
-
How do I get an Internet Explorer on my Mac OS X, I need it to run work programs?
How do I get Internet Explore on my Max OS X, I need it to run work programs?
-
How to display html form information
I know you can create an html form where visitors can input data and that data can then be sent to the specified email address. But I am wondering, is it possible to have this data that they enter create and displayed on a new page in a specified lay