Trying to install Flash on new MacBook Pro w/ OS 10.6.5

I've downloaded it and ran the install three times now and it still won't let me run any flash videos. It keeps telling me that I need to update it.
For the record, this i my first Mac and I was stupid on PCs too.

http://kb2.adobe.com/cps/865/cpsid_86551.html
http://kb2.adobe.com/cps/192/tn_19254.html

Similar Messages

Trying to install PS4 on new MacBook Pro. I have already installed PS 3 extended. When PS4 asked for my PS3 serial number will not accept # on back of my PS3 case?

I have PS3 and PS4 installed on Mac 27", but when I try to install PS4 on my new MacBook Pro will not accept Serial # on my PS3 Extended case. Even though I have PS3 Extended installed!! Tried Serial # with and without dash, but neither works. Had both installed also on my MacBook Air OK but I wiped intend installed new OS. Not clear why PS4 not accept PS3 Serial # despite the fact that PS3 Extended already installed with the correct Serial #.

Photoshop 3 and Photoshop 4 for the Mac were released in the 1990s before Mac OSX and will only run natively on the Classic Mac OS (OS 9.x or older). They may run under emulation in "Classic Mode" on a PPC Mac up until OSX 10.4. They will not run on any Mac with an Intel processor nor with OSX 10.5 or newer. Same with Photoshop 5 and Photoshop 6.
Photoshop 7 came with both Classic and OSX versions, but will only run on a PPC-based Mac, or an Intel Mac up to OSX 10.6.x with the Rosetta emulator
Now, to clarify the naming of versions;
Photoshop CS = "Photoshop 8.x"
Photoshop CS2 = "Photoshop 9.x"
PS CS and CS2 came as OSX versions only and will only run on a PPC-based Mac, or an Intel Mac up to OSX 10.6.x with the Rosetta emulator
Photoshop CS3 = "Photoshop 10.x"
Photoshop CS4 = "Photoshop 11.x"
PS CS3 and CS3 came as OSX versions but run on either a PPC-based Mac up to OSX10.6.x with the Rosetta emulator or an Intel-based Mac, at least up to Mountain Lion OSX 10.8.x (the latest I have tried personally)
As for upgrades, you can go back about (3) revisions to use the old SN for an install; e.g. a PS 7 SN can be upgraded to PS CS3 (10.x) but not to PS CS4 (11.x). So, there is no way PS 3 could be upgraded directly to PS CS4 (11.x)

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

Hello, I just bought a Snow Leopard and I have tried ti install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.

Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
Thanks

Here are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao.

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I am trying to install os x on macbook pro and it keeps saying mac os x can't be install on this computer

i am trying to install os x on macbook pro and it keeps saying mac os x computer, and i don't have any backup to restore

Do you have a retail disc with a picture of a Snow Leopard on it, or is it a gray disc? If it's gray, did it come with the machine you're trying to install on? If it came with a different Mac, it won't work.

I tried to install ios 7 in macbook pro and the error 3 persist. phone is in the recovery mode

i tried to install ios 7 in macbook pro and the error 3 persist. phone is in the recovery mode

Try on a different computer. If you get this error again, go to an Apple store or call AppleCare. I've only seen this error once, & I was unable to solve it. Took the phone to the genius bar & they replaced the phone.

HT4796 Can Windows 7 be installed on my new MacBook Pro, through my network connection? The disc would be in my Windows desktop.

Can Windows 7 be installed on my new MacBook Pro, through my network connection? The disc would be in my Windows desktop.

I wouldn't recommend installing through a network connection.
For a Virtual Machine:
If you have the Win 7 media (DVD), use an app like PowerISO or MagicISO to make an ISO file of the install disc and use that.
For BootCamp:
Use the original install media and BootCamp Assistant, to install from your DVD Drive.

Trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out dis

trying to install adobe photoshop on macbook pro but at 50% it gives error message and kicks out disc

copy the disc contents to a desktop folder and click setup in that desktop folder.
if that fails what ps version are you trying to install and what is your os version?

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton

Trying to install Win 7 on MacBook Pro with OSx 10.9.3 and computer does not recognize install dvd

I'm using a 2009 MacBook Pro running Mavericks 10.9.3 and I am trying to install Win 7 using BootCamp 5. I've been able to install BootCamp before using the original Win7 install dvd on this computer but ever since I updated it (not sure how many time, its been a year or so since I last used BootCamp) and started using BootCamp 5 its been giving me problems reading the DvD. I know my internal DvD reader works because I've imported music recently but whenever I get into the very first step of BootCamp 5 (Download Support and Install Windows option screen) I click next with only install windows option checked and it tells me to wait for the DvD to be recognized when its already in. However it does come up with the option later to open with/eject the "blank DvD" which is the Win install DvD. Any ideas on how to get around this issue?

Robert.Delfs wrote:
1. Brand new MacBook Pro 2.5 GHz Intel Core i7 machine with two graphics chips (Intel HD Graphics 3000+ AMD Radeon HD 6770M), with   OS X 10.7.2 Lion (Build 11C74) pre-installed.
2. Attempting to download latest version of Photoshop CS5 fails.
     a. Downloading CS5 from Adobe.com requires pre-installing Adobe Download Assistant.
     b. Adobe Download Assistant can be downloaded but cannot be installed because it requires pre-installing Adobe AIR.
     c. Adobe AIR can be downloaded but won't install. Sometimes it issues error msg saying it requires most recent version of Adobe AIR, other times there is no screen activity after attempting to install from <AdobeAir.dmg>.
2. There is no option to turn off automatic graphics switching in Energy Saver System Preferences on this computer, so that suggested solution does not work.
3.   Turning off (unchecking) "Automatically reduce brightness before display goes to sleep" has no effect — still unable to install AIR.
This is a nightmare. The reason I bought this computer rather than a less expensive model was to run Lightroom (which did install OK) and Photoshop CS5. HELP!
Robert
My suggestion would be to reinstall Lion from zero. No update.
I did that, and now I can install / uninstall Air without problems.
The installation takes about 20 minutes...

Install Windows on new MacBook Pro?

Do I have any option other than additional hardware to install Windows on a new MacBook Pro?
Option one:
Get my hands on an older Mac with DVD drive.
Option two:
Buy an external DVD drive.

Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
The MacBook Air has never had an internal superdrive, Apple provides a download driver thru Boot Camp Assistant in additon to Windows Support Software, for USB-DVD.
So yes,DVD; or flash drive(?)

LP8 won't install on my new macbook pro (ver 10.8.4).

I purchased LP8 a couple years ago, installed it on my desktop, then purchased and installed the upgrade to LP9 when that came out. (My desktop is the only computer that I've installed LP on).
I just bought a new Macbook Pro running OS X (ver. 10.8.4), however, when I tried installing LP8, the macbook wouldn't install b/c the program was too old and is therefore incompatible.
I don't have to purchase an entire new set of LP in order to get it on my new laptop, do I? I still have plenty of those LP ugrade coupons left, so I don't want to re-purchase the DAW.
Thanks...

Sorry, but when Logic Pro 8 was released (2007) 10.5 was the most current OS X version. We are now at 10.8 and that OS doesn't support some of the old applications anymore. 6 years have passed since.

Adobe CS4 Indesign plugins missing when installed on brand new MacBook Pro. How can I get these missing plugins? Indd. files will not open

Please Help!
Adobe Chat doesnt deal with old products
Apple Genius Bar says to talk to Adobe.
HAD a 2008 MacBook Pro with Adobe CS4 installed
now have a brand new MacBook Pro (and used my time machine to back up from my old mac) and when trying to open InDesign files - gives a list of plugins that are missing and will not open the document.
I'm a graphic designer- so this is not an option..
Please Help!

You can install Adobe Programs ONLY from the originals installer which is provided from Adobe. Time Machine (which is a form of migration) will not result in working Adobe programs. As Bob said, use the Creative Cloud Cleaner Tool, which is also working for CS versions, to wipe out everything from Adobe and start with a clean installing.
I am not sure, if CS4 is running on Maverick, at least it is not supported officially, your are here alone. It might be so that you have to upgrade your software to a later version.

Trying to install Flash on new MacBook Pro w/ OS 10.6.5

Similar Messages

Maybe you are looking for