Trying to install HP all-in-one C4280

I have installed the drivers and changed the screen resolution to what is required, and I get a message that the document is being sent to the printer, but nothing happens! It is a 5 year old or so, printer and I know it is not a high-speed device. I did a driver check and got a message that my USB cord was out of date. Could that be the problem?

Hi and welcome...you didnt say what model u use and operating system ...
look in devicemanager .. be sure there is no yellow questionmark ... in the usb hub section ...
if there is one... download and install chipset driver....
.... looking for latest printer driver also a good idea...
otherwise its a good idea to buy a new usb cable
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

Trying to install multiple All in One Printers on new laptop

Got a new HP Envy laptop running Windows 8.1. Replacing old HP running XP. Trying to install two HP All in One printers on my home wireless network HP 6500 E709n and a HP 7410. I am stuck in an infinte loop using the HP Print and Scan Doctor. I load up one printer Driver using the downloads on the website. When I go to load the other printer, the system won't let me continue until I uninstall the previous printer driver and accessy software.
Anyone know how to get around it?

Hello again,
Thanks for getting back to me!
Next, I would suggest uninstalling all of the printer software on your computer, performing a clean boot and then reinstalling the OJ 7410 first and then the OJ 6500. Here are the steps and links in order for you.
Uninstalling the Printer Software
Restart the PC
How to perform a clean boot in Windows
Restart the PC
Download and Install - HP Officejet 7410 All-in-One Printer
Download and Install - HP Officejet 6500 Wireless All-in-One Printer - E709n
I hope this works for you!
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Fail with quickstart with fresh install the All-in-one Installer

Hi all,
I install the quick install with all-in-one installer, and start the Endeca Server from program menu, and then I can get to the http://localhost:8080, and login successfully.
Then I start the Integrator, open the quickstart project, but when I try to run the Baseline.grf it get fail with:
IERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 finished with status: ERROR caused by: org.apache.axis2.AxisFault: Read timed out
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 error details:
com.opensys.cloveretl.component.ws.exception.SendingMessegeException: org.apache.axis2.AxisFault: Read timed out
     at com.opensys.cloveretl.component.ws.proxy.b.b(Unknown Source)
     at com.opensys.cloveretl.component.ws.proxy.b.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.execute(Unknown Source)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
Caused by: org.apache.axis2.AxisFault: Read timed out
     at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:193)
     at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222)
     at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402)
     at org.apache.axis2.description.OutInAxisOperationClient$NonBlockingInvocationWorker.run(OutInAxisOperation.java:442)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     ... 1 more
Caused by: java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     at org.apache.commons.httpclient.HttpParser.readRawLine(HttpParser.java:78)
     at org.apache.commons.httpclient.HttpParser.readLine(HttpParser.java:106)
     at org.apache.commons.httpclient.HttpConnection.readLine(HttpConnection.java:1116)
     at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.readLine(MultiThreadedHttpConnectionManager.java:1413)
     at org.apache.commons.httpclient.HttpMethodBase.readStatusLine(HttpMethodBase.java:1973)
     at org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1735)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1098)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
     at org.apache.axis2.transport.http.AbstractHTTPSender.executeMethod(AbstractHTTPSender.java:550)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:189)
     ... 9 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 600
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 600 16351
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 600 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
and the start Endeca Server window is stop on Starting
2012-12-14 22:09:48.043:INFO:oejs.AbstractConnector:Started SelectChannelConnect
[email protected]:7770 STARTING
Any help is really appreciate.
Thanks,
Jason.

Baseline.grf is not able to connect to Endeca Server. Make sure Endeca Server has started correctly and then run baseline.grf graph.
Regards,
Srikanth

Problems Installing J4680C all in one

I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
This is the screenshot I took:

Hi @Mezron,
I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
Here is a example using McAffee Security Center.
Disable Real-Time Scanning and the Firewall:
Open your McAfee product located down by your clock and right click the M.
Click Navigation and select Real-Time Scanning .
Click Turn Off .
Click Navigation and select Firewall .
Click Turn Off .
Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
Close your McAfee product. The status should show that you are not protected.
Then follow this document to register Windows components, msconfig and reinstall the printer software again.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install hp all in one officejet x64 drivers windows 8 it

unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

Hello louvallee,
If you had upgraded you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step#
Else
1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Install F380 ALL IN ONE

Hi I have a HP DESKJET F380 ALL IN ONE THAT IS SAY IS NOT COMPARABLE WHIT MY DELL WINDO VISTA. HELP
Message Edited by sirena on 12-31-2008 07:14 AM

Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can't Install C5200 All-in-One Printer Full Feature Software- Runtime error Prevents Installation

I am running Windows 7 64-bit and I am unable to install the HP Photosmart C5200 All-in-One Printer series Full Feature Software that I downloaded from the website.
After extraction, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: c:\Users\MyUsername~1\AppData\Local\Temp\7zS7526\Setop.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information
Can anyone help me solve this problem?
The actual printer and all associated drivers are installed and working correctly.

Hey cmsciulli,
I would first like to welcome you to the HP Support Forums!
When getting the Microsoft Visual C++ Runtime error message. The first step that I would suggest doing, is to make sure that you do have the latest update. I have included a link to the latest available download from Microsoft for 'Visual C++ Redistributable for Visual Studio 2012 Update 4'. Along with this update, I would also suggest completing any other Windows updates that are available to you.
After you have installed all the necessary updates, I would suggest restarting your computer, if you have not already. Then try installing the printer software again.
If you are still experiencing the same error message when trying to install the printer, please let me know the version of Windows that you are currently running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
Looking forward to your reply!
I worked on behalf of HP

Trying to use HP All-In-One to scan with Airport.

I just picked up an HP Officejet 6210 all-in-one. I got it set up and plugged into my Airport Extreme Basestation. I did a print test from my (wireless) MacBook and everything worked fine.
Next I tried to open the scanning software. I kept getting a message saying there was no scanning device connected. Then I would plug the USB cable to the Officejet directly into my MacBook and everything worked fine.
I chatted with an HP tech online and they said I would have to use HP's wireless router and get rid of the Airport Extreme to be able to do everything on the Officejet using wireless, and that by using the Aiport Extreme I would only be able to use the print functions and plug in directly whenever I wanted to scan or fax.
This *****. Have any of you run into the same problem? Is there any way to use all of the features (printing, scanning and faxing) of the HP Officejet using the Airport Basestation?
Thanks very much,
Ted Vieira

Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

I installed kodak all in one printer but its not working, it says its ready but its not printing

I installed a kodak all in one printer 5250 and it says its ready but won'nt print the test page. what can I do?

When you go to System Preferences > Printing, is the new printer found there?

Cannot install F4280 All-in-One in Windows Vista 32 bit

I downloaded the latest driver and full feature software but I get a screen that says there is a newer version of the software already installed. Any ideas are greatly appreciated (except buying a new printer).

I tried each step but no cigar. Some files were found to be corrupted and almost all were fixed by running the MS diagnostic tools you suggested. I have provided some information from the sfc.txt file below that may be the root cause but I am not software savvy to the point of understanding what the information is actually telling me.
2014-10-15 19:42:24, Info                  CSI    000001df [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-15 19:42:25, Info                  CSI    000001e1 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-15 19:42:25, Info                  CSI    000001e2 [SR] This component was referenced by [l:158{79}]"Package_16_for_KB948465~31bf3856ad364e35~x86~~6.0.1.18005.948465-49_neutral_GDR"
2014-10-15 19:44:46, Info                  CSI    00000243 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-15 19:44:46, Info                  CSI    00000248 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-15 19:44:46, Info                  CSI    00000249 [SR] This component was referenced by [l:158{79}]"Package_16_for_KB948465~31bf3856ad364e35~x86~~6.0.1.18005.948465-49_neutral_GDR"
I still can't seem to completely get the program files uninstalled or reinstalled. What file does the software check when detecting the current software installation status? If I had that information, I might be able to find a way to remove it or modify it to allow the new installation. I am at a loss. I know that there has to be a way to resolve this but I am still a novice when it comes to the software.

IPhone4 will not turn on. Tried reboot with home button and power button, and tried with sim out. Left on charge for an hour and nothing. Tried plugged into PC and nothing. Tried holding any and all buttons one at a time and plugging into PC and nothing.

Hi,
This is for my wife's iPhone 4
She was on a call and went to end the call and the phone just turned off.
Left it on charge for an hour or so and nothing.
I tried the old reboot (home button and power button) and nothing
I tired with the sim out.
And with it plugged into a PC, opened iTunes and it didn't recognize that the phone was plugged in.
I tried my PC and nothing.
My phone charges and connects to both PC's
Tried holding the home button then plugging into PC
Tried holding the power button then into PC
I've now been trying different combinations for about 3 hours and now I'm all out of ideas.... :(
Please please can some help before Tuesday when I will have to find someone to repair it.
Thanks,

Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.

Cannot install C8180 all-in-one printer missing installer.exe in c:\users\name\AppData\Local\Temp

I was attempting to reinstall my printer but got an error message:
Cannot find "Installer.exe" in C:\users\name\AppData\Local\Temp specific file called "FP_AX_MSI_INSTALLER.EXE"

Hello @doug1234 ,
I read your post about the virus you had, and now are having an issue with re-installing your Photosmart C8180. I will try to help you!
Please go back into your temp folder, delete all of the files it will allow you to, close out of the temp folder and download and reinstall the printer again with your firewall and/or anti-virus temporarily disabled. Let me know what happens, including any specific error messages and codes.
When you respond, please include which Operating System you're running and I will look into this further for you, to see what else we can try.
What's my Operating System?
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Am looking for driver to install HP All in one 2050 for window 7

please install my printer into this computer!

Hi @sentichris, and thanks for reaching out to the HP Forums! I can happily help you install your Deskjet 2050.
You can either install the full feature software with the link below, or you can use the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
DJ2050_J510_1313-1.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trying to install icloud - all apps and videos erased

I have an ipad 1. I upgraded itunes so i could try icloud but now have none of the apps i have bought. No tv shows or movies either - through itunes account, can i get them back on?

As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free. TV shows can be re-downloaded in some countries, but films can currently only be re-downloaded in the US : re-downloading. Have you not got a copy of your purchases on your computer's iTunes and/or on a backup ?

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trying to install HP all-in-one C4280

Similar Messages

Maybe you are looking for