Trying to install InDesign 5.5 update.

Trying to install InDesign 5.5 update. It says I don't have a qualifying product. I most certainly do. I have Design Premium 5, and it is registered. So why won't the update install? This is urgent - I have a project due tomorrow morning.

You have upgarded from design premium cs5 to indesign cs5.5 , which is a invalid upgrade as Adobe doesn't provide the upgrade from the suite to the point product.
You need to contcat Adobe support to get this thing sorted out as the installtion will not go through.
To complete your project you can install Indesign as the trial and then use it for the 30 days and in the meantime contact Adobe support.

Similar Messages

  • I'm trying to install indesign 2.0 on macbook pro - help!!!

    I'm trying to install indesign 2.0 on macbook pro (10.6.8, 2.66ghz, corei7, 8gb). Everytime I try to install it from the CD, the install software crashes.  Any help would be really appreciated!
    thanks
    Jean

    Is this ID 2 or ID CS2. I would not be at all surprised if ID 2 would not work or install, that is ancient software. It came our in 2002 and was the first version to support OS X. InDesign CS 2 came out in 2005. It is not intel native. It is quite long in the tooth. This is probably the last chance to update to CS 5.5 without purchasing a new version from scratch. That doesn't really solve your problem. I'd suspect either you have too much RAM or the problem is you might be booting using a 64-bit kernel. Can you check to see if your machine can boot with the 32-bit kernel.

  • I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

    i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

    I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed.  It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4).  Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html   The previous version works beautifully.

  • Trying to install Itunes 10.5 update problems.

    Trying to install Itunes 10.5 update onto my netbook running windows xp and it keeps telling me it can't continue the update due to missing something from the windows installer package. My installer package is the latest I can find which is 4.5 from microsoft site. Help.

    downloaded winrar and extracted that bfile, haha answered my own question,

  • Tried to install the most recent update and now my ITUNES won't load. Getting an error message that says there is a "runtime error" and that I need to reinstall INTUNES. Help!!!

    Tried to install the latest ITUNES update, but now it won't open my ITUNES at all. Saying I have a "Runtime error" and that I need to reinstall ITUNES. Tried a "repair" in Programs on my computer, but that didn't work either.

    Hello joeydak,
    We've an article that provides troubleshooting steps which can help get iTunes back up and running.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

    Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • I continue to receive "failed to mount" when trying to install .dmg files or updates.  Has anyone found an answer to this problem?  I am operating on Mac OS X 10.4.11

    I continue to receive "failed to mount" when trying to install .dmg files or updates.  Has anyone found an answer to this problem?  I am operating on Mac OS X 10.4.11

    10.4.11 was only available as a PowerPC updater application (both as a Combo and as a Delta) to Macs with 10.4 or later that were PowerPC. If you don't have 10.4 installed on your Mac, see this tip:
    https://discussions.apple.com/docs/DOC-2541

  • I'm trying to install the latest OS update and it is "stuck" - logo and half the bar is displayed

    I am trying to install the latest OS update and it is "stuck"  - display shows logo and bar half done...

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • Trying to install InDesign CC

    Hi
    I am trying to install InDesign CC, I have downloaded the Create Cloud Packager and using my serial number I generate the MSI package and the only error message that appears in the build log is:
    No file exist at (C:\Users\USERNAME\Desktop\Adobe\ICTS-Adobe-InDesign\Build\ASU\Tools\CCC\Uninstall\deploy \remove.xml)
    When I run the install then it does not show anything and the Windows message pops up saying that this program wasn't installed properly. There were no shortcuts created, and nothing obvious in the x64 or x32 Program Files folders.
    Can anyone help?
    Many thanks

    Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

  • Trying to install inDesign.  Receiving error message: Unable to extract Temp Directory (EX11)

    Trying to install inDesign.  Receiving error message: Unable to extract Temp Directory (EX11)

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • We are trying to install indesign suite programs (id. ps. ill and acrobat) no download happens?

    we are trying to install indesign suite programs (id. ps. ill and acrobat) no download happens?

    Gary what version of the software are you trying to install?  Is it Creative Cloud or Creative Suite?  Also which operating system are you using?  Do you receive any specific error messages?

  • Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Nope....I know. i need to blame myself. it just asked me when i pluged the phone to my pc for the first time since looong...
    so. its okay. i had a back up with some pictures and some contacts and all that.
    the install process just got an issue so it stoped half way through and i could only completely start over.
    i was mad. now its okay

  • I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appeats while extracting

    I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appears while extracting

    Without system info and other details nobody can tell you much. This simply means that you run out of (temporary) disk space, maybe because the drive is really full, maybe because you have insufficient user privileges...
    Mylenium

Maybe you are looking for

  • How to create a user in BI

    Hi, I am trying to add a user that I can use in BI other than the Administrator user. I have added a user via the Security Manager of BI Admin and have assigned it the Adminstrators security group. However when I try to log into BI Answers using this

  • How to remove the negative sign in universe designer?

    hi all, have used BEX query designer first to create the query, for the key figures, i have choose 'reverse sign' option and in the BEX analyzer report, it showing correctly with the figure having 'reverse sign'. however, the 'reverse sign' was not b

  • Setting mail notifications in Hyperion Planning 9.3.1

    I have tried setting up the email notifications in Hyperion Planning 9.3.1 version There are 3 settings that needs to be changed: 1) Advanced Settings in Hyperion Planning 2) Notifications in Hyperion Workspace 3) Set provisions in Hyperion Shared Se

  • Itunes download for Windows 98?

    My boyfriend has an ipod shuffle but his computer doesnt have internet access and runs Windows 98. Is there a way for my to download on old version of itunes for him, burn it to a disc for him to use on his computer? Or any other ideas of how he coul

  • Application failed to return status record to ALE layer after Idoc procesed

    Hi, I am loading a full load to Product category (hierarchies) through process chain. One of the load failed with the following error. The Idoc has status 51 in BW. Can some suggest me the process for correcting this. Thanks No status record was pass